No edit summary |
No edit summary |
||
Line 14: | Line 14: | ||
Motivation for this project is that outside industruial semiconductor production the processed wafer quantities are small. In academia it is common to process 1-3 wafers at a time. Therefore wet etching and other dipping is often done in a beaker. It is quite difficult to find small dippers for 2 inch wafers that fit into a standard 250 ml beaker. | Motivation for this project is that outside industruial semiconductor production the processed wafer quantities are small. In academia it is common to process 1-3 wafers at a time. Therefore wet etching and other dipping is often done in a beaker. It is quite difficult to find small dippers for 2 inch wafers that fit into a standard 250 ml beaker. | ||
==Designer== | |||
'''[http://orcid.org/0000-0002-2850-2702 Christoffer Kauppinen]'''' | |||
Aalto University, | |||
Department of Electronics and Nanoengineering | |||
== Project goals == | == Project goals == |
Revision as of 13:30, 25 October 2017
This 2 inch wafer dipper is designed to fit into a 250 ml Schott Duran beaker. Number of wafers that can be fitted are automatically calculated and taken into account. The user needs to think only the size of his or her beaker and ofcourse the wafer dimensions.
Motivation for this project is that outside industruial semiconductor production the processed wafer quantities are small. In academia it is common to process 1-3 wafers at a time. Therefore wet etching and other dipping is often done in a beaker. It is quite difficult to find small dippers for 2 inch wafers that fit into a standard 250 ml beaker.
Designer
Christoffer Kauppinen' Aalto University, Department of Electronics and Nanoengineering
Project goals
Describe project goals here.
To make a numbered list use the pound sign:
- Like this
- and like this
- See Help:Contents for more formatting code.
Design
The design can be found here: Parametric wafer dipper
-
Dipper for 2 inch wafers with circular cut.
-
Dipper for 2 inch wafers with rectangular cut.
-
Dipper for 4 inch wafers, showing the parametric design.
Next level heading
You may need deeper level headings. Just keep adding equal signs to get that.
Costs
You may describe your costs here.
header 1 | header 2 | header 3 |
---|---|---|
row 1, cell 1 | row 1, cell 2 | row 1, cell 3 |
row 2, cell 1 | row 2, cell 2 | row 2, cell 3 |
See Help:Tables and Help:Table examples for more.