File:Urinary Catheterization Simulator Gillis hero.jpg
No higher resolution available.
Urinary_Catheterization_Simulator_Gillis_hero.jpg (800 × 584 pixels, file size: 56 KB, MIME type: image/jpeg)
Figure 1 from Gillis CJ, Bishop N, Walsh G, Harvey D (2020). "Evaluation of a Novel 3D-Printed Urinary Catheterization Simulation Model in Undergraduate Medical Teaching." Cureus 12(5):e8377. DOI 10.7759/cureus.8377. PMC PMC7328704.
The figure is a labelled design diagram of the proposed 3D-printed urinary catheterization model, with three principal external dimensions (76.04 mm, 106.75 mm, 26.43 mm) annotated, and the urethra approximated at 178 mm length with a 7 mm internal diameter.
| Date created | Unknown |
|---|---|
| Author | Unknown |
| Date uploaded | May 13, 2026 |
| Uploader | Arturo Pelayo |
| License | CC-BY-4.0 |
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 16:08, 13 May 2026 | | 800 × 584 (56 KB) | Arturopelayo (talk | contribs) | Figure 1 from Gillis 2020 Cureus 12(5):e8377. CC BY 4.0. Source: PMC7328704. Design diagram of urinary catheterization simulator with labelled dimensions. |
You cannot overwrite this file.
File usage
The following page uses this file: