Anonymous1 (talk | contribs) |
m (4 revisions: merging history of topic page with content developed on category page.) |
(No difference)
|
Revision as of 11:10, 6 November 2009
Swales, also know as bioswales are a shallow troughlike depression that's created to carry water during rainstorms or snow melts. -- Wiktionary. They are rapidly becoming a staple in the design of sustainable urban landscapes due to their number of advantages. Many governments are begining to require bioswales along with other "best management practices"
Advantages
- A means of groundwater recharge, a favorite of Bill Mollison permaculture pioneer.
- Asthetically pleasing
- They treat water flowing through them
- oils in the water stick to the foliage where they break down over time.
- sediments are trapped and filtered out
Design Recommendations
- Single swales can not treat areas greater than 10 acres.
- Impractical on steep slopes.
- Requires thick vegitation.
- The swale should have a treatment area larger than 4% of the impervious surface it treats.
- The treatment depth should not exceed 2/3 the depth of the grass in the swale
- The dimensions of the swale should be checked with Manning's equation and a value of .25 for "Manning's n"
- Care should be taken in the design of the inlet and outlet of the swale
- A 6% down slope grade is ideal to insure that the velocity of the water in the swale does not become excessive.
- the side slopes of the swale should not exceed 3 to 1 (three feet over for every one foot down)
- The swale should have a maximum treatment width of 10ft, parallel swales should be used if greater widths are necessary.
External links
- Save the Swales - WHY MANAGE RUNOFF? (the site of a local government in Florida).
- http://www.wikihow.com/Dig-Swales
- Alameda County Stormwater Technical Guidance has more details for the design of Bioswales and other best management practices.