(Created page with "=Schedule of Events= ==At least two weeks prior to workshop== * Distribute [http://3d4edu.com/WorkshopPreparation.pdf introductory document] * Attendees should join the [https...") |
|||
| Line 8: | Line 8: | ||
'''All attendees must bring their laptops to this introduction.''' | '''All attendees must bring their laptops to this introduction.''' | ||
* Welcome and introductions | * Welcome and introductions | ||
* | * Facilitators will check that all of the software outlined [http://www.appropedia.org/Delta_Build_Overview:MOST#Before_You_Begin here] is installed and working | ||
* | * Facilitators will assure assembly wiki and videos are accessible by each attendee | ||
* | * Attendees will assemble tools | ||
==Day One== | ==Day One== | ||
Revision as of 17:01, 25 July 2014
Schedule of Events
At least two weeks prior to workshop
- Distribute introductory document
- Attendees should join the MOST Delta User's Group
Evening Prior
(Two hour duration) All attendees must bring their laptops to this introduction.
- Welcome and introductions
- Facilitators will check that all of the software outlined here is installed and working
- Facilitators will assure assembly wiki and videos are accessible by each attendee
- Attendees will assemble tools
Day One
(Expect eight hour minimum duration)
- 8:00 AM - Introduction to workshop format and assembly
- 8:30 AM - Start assembly
- 12:00 PM - Break for lunch away from assembly area
- 12:30 PM - Resume assembly
- Teams who complete assembly early should help teams that are not complete
- Teams may leave upon demonstrating all mechanical assembly of the first printer is complete
Day Two
(Expect eight hour minimum duration)
- 8:00 AM - Start assembly
- 12:00 PM - Break for lunch away from assembly area
- 12:15 PM - First presentation
- 12:30 PM - Resume assembly
- 3:00 PM - Break for second presentation - all assembly come to a stop for presentation
- 3:15 PM - Resume assembly
- Teams who complete assembly early should help teams that are not complete
- Teams may leave upon demonstrating all mechanical assembly of the second printer is complete
- If all teams complete mechanical assembly early, upload firmware
Day Three
(Expect eight hour minimum duration)
- 8:00 AM - Upload firmware
- 10:00 AM - Initial power up of printer, start calibration
- 12:00 PM - Break for lunch away from assembly area
- 12:15 PM - Third presentation
- 12:30 PM - Resume calibration
- 2:00 PM - Introduction to online model repositories; how to download and print models
- 4:00 PM - Introduction to OpenSCAD
(Optional) Day Four
- Build printing skills