Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Gravity fed drip irrigation, semi-automated
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Problems to solve == The manual cleaning of drippers must be eliminated. It's the main drawback to this system. After 3 weeks they begin clogging and cleaning helps, but it's difficult to leave the system alone for more than a few days. Homemade replacement parts to reduce cost! Moisture sensors in the ground would give a more accurate measure of whether each plant gets enough water. We'd like to solve this by putting a tiny motor on top of a spike at each plant and let the drip fall onto the ends of 2 wires, the computer could read the short circuit as a drop, thus enable real automation by adjusting the pressure on the hose to regulate the drop count.
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
This page is a member of 2 hidden categories:
Category:Pages with commas in the title
Category:Pages with no main image
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion