Get our free book on rainwater now - To Catch the Rain.

Storage of Sample Boxes

From Appropedia
Jump to: navigation, search
Aalto.png This page was part of an Aalto University course 3D Printing of Open Source Hardware for Science

Please leave comments using the discussion tab. The course runs in 2018. It is not open edit.


Designer[edit]

Xuerong Hu' Aalto University, Department of Electronics and Nanoengineering

Project[edit]

There are always a lot of sample boxes in our Nitrogen storage box in the lab and clean room.It is messy. The goal of this project is to design a storage of sample boxes, which is easy for sample classification.

Concept[edit]

There is no this kind of sample boxes in our lab and I don't know where we can buy it, but I think it is really useful and necessary.

Estimated Costs[edit]

  • The cost is €10.

Directions[edit]

Print this storage using the attached STL[1] with PolyLite PLA. It is designed exactly according to the most commonly used sample box in the cleanroom.

Images of Prints[edit]

Storage