{"id":70013,"key":"Tent_Vertex_Joint","title":"Tent Vertex Joint","latest":{"id":1093597,"timestamp":"2024-02-28T15:08:11Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n[[File:Tent Vertex Joint Pic.jpg|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.youmagine.com/designs/tent-vertex-joint\n}}\n\n{{Project data\n| authors = User:Jcismith\n| made = Yes\n| replicated = No\n| cost = USD 1.65\n}}\n\n{{notready}}\n\n* non parametric\n* not looped\n* no holes for permanent fixturing\n\n== Tent Vertex Joint ==\n\nProject developed by [[User:jcismith]]\n\n== Abstract ==\n\nThe purpose of this build was to make it easier and more convenient for individuals around the world to construct shelters with the resources available to them. The tent vertex joint accomplishes this by providing a sturdy point to join multiple poles for constructing a tent. [[Image:Tent Vertex Joint Pic.jpg|500px|right]]\n\n== Bill of Materials ==\n\n# Filament\n# Design files (OpenSCAD and STL): [https://www.youmagine.com/designs/tent-vertex-joint | Youmagine Link]\n\n== Tools needed ==\n\n# [[Athena Build Overview|MOST Delta RepRap]] or similar RepRap 3-D printer\n\n== Skills and knowledge needed ==\n\n# Knowledge of OpenSCAD is needed to manipulate the vertex joint if necessary.\n\n== Technical Specifications and Assembly Instructions ==\n\n=== Print Directions ===\n\nThere is one .stl file for this print available to download.\n\n==== Layer Height ====\n\nIt is recommended to print at a layer height of 0.1mm for a good quality vertex joint printed accurately.\n\n==== Speed ====\n\nIt is good practice to print at slow speeds when producing quality prints, especially with this print due to the angle of the pole sockets. For the print above I used 40mm/s.\n\n==== Temperature ====\n\nI used Hatchbox 1.75mm PLA to make this print. A good temperature to print at with this filament is 185 degrees celsius.\n\n==== Fill ====\n\nI used 25% infill to ensure I made a strong, relatively light, good quality print.\n\n==== Support Material ====\n\nI printed with support material everywhere (touching the build plate and within the part itself) to maintain good quality when printing the angled pole sockets.\n\n==== Removing Support Structure ====\n\n# Using needle nose pliers, grab and tear support structure off from the pole sockets.\n# Once all or most of the support structure is removed, sand until desired finish is achieved.\n\n==== Print Temperature ====\n\nFor the PLA I print at 185 degrees Celsius, which provides me with precision printing and minimizes maintenance issues.\n\n==== Assembly Time Estimate ====\n\nN/A\n\n=== Common Problems and Solutions ===\n\nTBD\n\n[[Image:Tent Vertex Joint Cura Pic.jpg|300px|right]]\n\n# Print Times (Varies on size of tent joint)\n## Vertex Joint pictured to the right - ~14 hrs\n# Assembly\n## N/A\n\n=== Common Problems and Solutions ===\n\n* TBD\n\n== Cost savings ==\n\n* Cost estimate uses the base STL files on Youmagine. Varying buckle sizes can result in different costs and savings due to the parametric nature of the project.\n# Total cost: $1.65 (82 grams PLA)\n# Commercial Part: ~$10 [https://www.alibaba.com/product-detail/OEM-ODM-best-price-plastic-tent_60367342106.html]\n# Approximate savings of $8.35 (83.5% savings)\n\n== References ==\n\n* Used as inspiration for design.<ref>web page: https://www.alibaba.com/product-detail/OEM-ODM-best-price-plastic-tent_60367342106.html</ref>\n* Used as reference for OpenSCAD design.<ref>web page: http://www.openscad.org/cheatsheet/</ref>\n\n<references />\n\n{{Page data\n| keywords = 3D printing, tent joint, camping\n| sdg = SDG03 Good health and well-being\n| organizations = Michigan_Tech's_Open_Sustainability_Technology_Lab\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:OSAT]]\n[[Category:OSAT 3D-Printable Designs]]\n[[Category:3D printing]]"}