{"id":82773,"key":"Table_Saw_Fence_Push_Stick","title":"Table Saw Fence Push Stick","latest":{"id":1093310,"timestamp":"2024-02-28T14:43:10Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n[[File:Tablesawstick.jpg|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.thingiverse.com/thing:4018759\n}}\n\n{{Project data\n| authors = User:JasonBell\n| made = Yes\n| replicated = No\n| cost = USD 8.79\n}}\n\n== Table Saw Fence Push Stick ==\n\nProject developed by [[User:JasonBell]]\n\n== Abstract ==\n\nThis part solves the problem of making very thin cuts on a table saw in a safe way. All current push sticks or push blocks on the market do not allow for cuts under 1/2\" while still maintaining the guards over the saw blade. This push stick rides on the fence of the saw and allows for a safer cut and makes smaller cuts possible without ruining the user's push stick.\n\n[[File:Tablesawstick.jpg|200px]]\n\n== Bill of Materials ==\n\nThis part can be fully printed and no other components are necessary.\n\n[https://www.thingiverse.com/thing:4018759 Click Here for STL and Source Code]\n\n== Tools needed ==\n\n# [[AthenaII|MOST Delta RepRap]] or similar RepRap 3-D printer\n\n== Skills and knowledge needed ==\n\nProduct is to be used on a table saw. Safe operation and knowledge of table saw needed for proper use.\n\n== Technical Specifications and Assembly Instructions ==\n\nOrient STL in slicing software as seen below (supports shown):\n\n[[File:Pushsticksupports.jpg|200px]]\n\nIf printer does not have vertical space required then orient like this(supports shown):\n\n[[File:Pushsticksupportsside.JPG|200px]]\n\nPush stick in use can be found below:\n\n[[File:Pushstickinuse.jpg|200px]]\n\n=== Printing / Slicing Settings ===\n\nTemperature: 210C\n\nInfill: 30% or more\n\nSupports: Yes\n\nSkirt: Yes\n\nSpeeds: First Layer: 40 mm/s, 70 mm/s remainder of print\n\nLayer Height: 0.15 mm\n\nMaterial: PLA\n\n=== Common Problems and Solutions ===\n\nSupport locations may vary depending on print orientation. The supports should put themselves in the correct locations when enabled\n\n== Cost savings ==\n\nEstimated Cost in PLA: $1.40\n\nCommercial Equivalent: No standard equipment performs this specific task in this way. The closest representation is a generic push stick found here [https://www.amazon.com/DeWalt-DW745-Table-Replacement-5140033-44/dp/B00B0WMBRW?ref_=fsclp_pl_dp_15]\n\nCheapest Commercial equivalent with less functionality for $10.19\n\n3D Printed for $1.40\n\n'''Cost Savings ~ $8.79 +\n\n'''% Cost Savings ~ 86% Savings +\n\n== Benefited Internet Communities ==\n\nWoodworking Talk [https://www.woodworkingtalk.com/forum.php]\n\nLumberjocks [https://www.lumberjocks.com/forums]\n\nThe Woodworking Patriot [https://thepatriotwoodworker.com/forums/forum/26-the-woodworking-discussion-forum/]\n\nWoodtalk [https://www.woodtalkonline.com/]\n\nWay of Wood [https://wayofwood.com/]\n\n== References ==\n\nWoodworking Catalogs\n\nWood Working Tool Designs\n\nWoodworking Tools List[https://toolspatrol.com/best-wood-working-tools/]\n\n{{Page data\n| keywords = 3D printing, table saw push stick, small cuts, wood working, carpentry\n| sdg = SDG08 Decent work and economic growth, SDG09 Industry innovation and infrastructure\n| organizations = Michigan_Tech's_Open_Sustainability_Technology_Lab\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:OSAT 3D-Printable Designs]]\n[[Category:Prototyping]]\n[[Category:Computer-aided design]]\n[[Category:3D printing]]\n[[Category:Wood working]]"}