{"id":90181,"key":"Planter_with_Water_Catcher","title":"Planter with Water Catcher","latest":{"id":1092910,"timestamp":"2024-02-28T13:16:19Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"[[File:Planter- OSAT.jpg|thumb]]\n\n{{Project data\n| authors = User:Tom K\n| status = Designed, Prototyped\n| tools = 3d printer\n| cost = USD 4.59\n| location = Illinois\n}}\n\n{{Device data\n| design-files = https://www.thingiverse.com/thing:4837328 Thingiverse.com\n}}\n\nThis is a planter with a water collection point. This removable cup allows for the easy collection of water to reuse for whatever is planted in this planter. This also has the modular capabilities to connect with another print of itself with the hook printed onto it, making sure it is good to use for space given to it.\n\n== Bill of Materials ==\n\n# This design used 1.53 grams of filament, which equaled a cost of $4.59 for the filament that was used in this project.\n## Here is a [https://www.thingiverse.com/thing:4837328 Thingiverse] link for the files for this project.\n\n== Tools needed ==\n\n# Jellybox or similar RepRap 3-D printer.\n\n== Skills and knowledge needed ==\n\n* None.\n\n== Technical Specifications and Assembly Instructions ==\n\n# This print requires no assembly.\n# The estimated print time for this design is 8 hours. This was printed at 70% scaling, as that is what fits on the Jellybox2 bed that was used for this project.\n\n== Cost savings ==\n\n# This design used 1.53 grams of filament, which equaled a cost of $4.59 for the filament that was used in this project\n# There are no 1-1 commercial equivalents for this design, but comparing it to many semi-similar commercial designs online, the average pricing was close to $20. This equates to a savings of 75%.\n\n{{Page data\n| authors = User:Tom K\n| published = 2021\n| keywords = planter, water catcher, water collection, osat, 3d printing, PLA filament\n| sdg = SDG11 Sustainable cities and communities\n| organizations = Principia College\n}}\n\n[[Category:3d printing]]"}