{"Device hardware license":["CERN-OHL-S"],"Page SDG":["SDG09 Industry innovation and infrastructure"],"Page URL":["https://www.appropedia.org/Open_Source_Bike_Brake"],"Page affiliations":["Category:MOST","Category:Michigan Technological University","MSE4777"],"Page description":["This project is an attempt to create a simple bicycle brake for the open source community. This brake relies on minimal hardware and uses scarp rubber for the brake pad material. If the users budget allows, conventional bike brake pads could be utilized. These brakes are adjustable to fit a multitude of bikes as long as they have a provision for brakes on the forks of the frame. These brakes are also lighter than conventional materials. Further improvement to this project could be made by making the parts parametric to be easily customized for any bike."],"Page image":["File:Behereau-full.jpg"],"Page keywords":["3D printing","bicycle","bike brake","scrap rubber"],"Page language":["en"],"Page license":["CC-BY-SA-3.0"],"Page title":["Open Source Bike Brake"],"Page views":[127],"Page year":["Tuesday, 01-Jan-19 00:00:00 UTC"],"Project authors":["User:Behereau"],"Project cost":[4],"Project thumb":["https://www.appropedia.org/w/images/thumb/5/5c/Behereau-full.jpg/330px-Behereau-full.jpg"],"Project type":["Bicycle brake"],"Project was made":[true],"Project was replicated":[true],"Project year":["Tuesday, 01-Jan-19 00:00:00 UTC"],"Modification date":["Tuesday, 18-Jun-24 20:01:18 UTC"]}