{"id":64943,"key":"Obvious_3D_printer_technology_based_on_21._Rushing_through","title":"Obvious 3D printer technology based on 21. Rushing through","latest":{"id":1209820,"timestamp":"2025-11-28T03:21:43Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}{{TRIZ-3D}}\n\n [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST) [[User:Snuchitp|Snuchitp]] ([[User talk:Snuchitp|talk]]) 07:31, 1 December 2016 (PST)\n\n[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 06:51, 3 December 2015 (PST)\n\n== Rushing through ==\n\n# Replace T5-belt with chain to increase resolution during changes in direction. (Higher speed around corners).\n# Add faster motors for resolution.\n# Auto support system (brim/raft).\n# Return to home after error then immediately return to known position in gcode and begin printing again.\n# Heat up and extrude out major clog's.\n# Faster travel speed to reduce stringing.\n# Print a second part on top of a first print.\n# Integrated printed parts.\n# Add felt feet strips to reduce noise.\n# Add liquid cooling system instead of fan.\n# Adjusting 3D printing legs and build platform.\n# Retract already printed filament.\n# Retract printed supports.\n# Print fast enough so warping is not an issue\n\n----\n\n# '''Stronger connections at joints''' [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Tighter belts [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Stronger belts [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Screws instead of belts [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:14, 4 December 2018 (PST)\n# Efficient G-code paths [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# '''Improve travel speed while printer is not extruding''' [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Heated beds to prevent part warping [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Printing multiple parts at the same time [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Adhesive on bed that does not dry to allow for quick/clean removal [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Better extruder components to allow for faster, more effective filament extrusion [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Stronger printer structure to prevent printer vibration and improve resolution [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Adjustable printer feet to allow for stable printer surface [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Self correct clogged nozzle by heating, retracting, and re-extruding filament [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:01, 4 December 2018 (PST)\n# Snap fit parts to allow for quick assembly/disassembly [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:07, 4 December 2018 (PST)\n# Minimizing plastic in designs [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:07, 4 December 2018 (PST)\n# Ability to stop, home, and return to previous position left on part [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:07, 4 December 2018 (PST)\n# Auto calibration [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:14, 4 December 2018 (PST)\n# Detect bed collisions, re-calibrate, and resume print [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:14, 4 December 2018 (PST)\n# Multiple heads to extrude multiple filaments colors or even materials on one print [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:14, 4 December 2018 (PST)\n# Auto leveling bed [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 07:14, 4 December 2018 (PST)\n# Do not use processed filament, only scraps of past materials[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n# Integrate printer control with slicing software, i.e Cura operates printer[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n# Integrate printer control with CAD software, i.e soldworks operates printer[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n# '''Automatic filament changeover and loading'''[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n# Print many materials in place, to create functional parts without assembly[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n# Skip conventional heating, micro head the very end of printer and seal it to environment making it safer[[User:ABStilwell|ABStilwell]] ([[User talk:ABStilwell|talk]]) 07:24, 4 December 2018 (PST)\n\nThe following contributions were made by [[User:Srschroc|Srschroc]] ([[User talk:Srschroc|talk]]) 20:03, 3 December 2019 (UTC)\n\n# Vary speed of infill extrusion so that it is faster at the center of the part where tolerance is less important, but slower within x mm of walls.\n# Preheating element for prepping filament for extrusion.\n# Make filament adhere to itself better so there is no need for support material.\n# Develop better adhesive to remove the need for rafts or brims.\n# Automated spatula to remove parts when completed so parts are cycled more quickly.\n# '''Allow printer to print multiple layers in one section before catching up in the next section. Remove the need to jump back and forth.\n# '''Print only exterior walls, then pour in filler material for inside density.\n# Multiple extruder nozzles pressed together to make wider flows.\n# '''Oven-like enclosure to decrease warp of part and increase extrusion speed.\n\nRound two, without real-life constraints [[User:Srschroc|Srschroc]] ([[User talk:Srschroc|talk]]) 20:54, 3 December 2019 (UTC)\n\n# Have a block of powder, then light shines from specific angles and where it intersects the powder solidifies.\n# Filament is liquified as a blob, then a balloon inflates in the center to make spherical parts.\n# Describe a part to your printer with your voice, and it prints the object you describe\n# ^This but you only need to think it.\n# Print in strands so fine that you can make fur-like insulation.\n# Make your printer assemble or dismantle instantly for quick use.\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}\n\n[[Category:4777 TRIZ 3D printers]]"}