{"id":64959,"key":"Obvious_3D_printer_technology_based_on_19._Periodic_action","title":"Obvious 3D printer technology based on 19. Periodic action","latest":{"id":1211158,"timestamp":"2025-11-28T13:12:06Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}{{TRIZ-3D}}\n\n #pulsing feed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n\n# printing changing dimension periodically from u to v to w within periodic time [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# shooting filament [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# cleaning head periodically\n# printing periodically at very high heat [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# printing at high heat and cooling periodically[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# Switch between different colors of filament[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# having an external nozzle to start print occassionally[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# changing motor speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# rotating bed and nozzle[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# printing at different angle[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# reduce noise by printing at a lower speed periodically[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# increase speed periodically\n# extruding different solution at times for different fragrance [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# alarm generation [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)\n# monitoring the speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)\n# print from image [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)\n# print on non flat bed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)\n# able to spray print to increase speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)\n# connecting to mobile app and show status of printing[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# getting print command from mobile app[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# able to pause and start from cell phone[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# inducing NVH characteristics[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# inducing thermodynamics characteristics[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)\n# having lights for printing\n# pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# rotating bed [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# multiple material print heads [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# assembly line of printers [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)[[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# print more efficiently with optics [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# vibrating hot end (self cleaning) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:39, 1 December 2015 (PST)\n# Print at lower motor frequencies to reduce noise [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)\n# print different components at the same time [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:44, 1 December 2015 (PST)\n# vibrating bed to releaase print when it's done [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:44, 1 December 2015 (PST)\n# more steps in stepper motor to increase resolution [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:46, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:46, 1 December 2015 (PST)\n# sound waves to sense location of bed, auto calibration [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:54, 1 December 2015 (PST)\n# sound waves to sense location of object, ensure quality print [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:54, 1 December 2015 (PST)\n# use optics to send more information [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:52, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:54, 1 December 2015 (PST)\n# Split print into sections to ensure cooling time [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:52, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:54, 1 December 2015 (PST)\n# Use multiple identical hot ends during print to put out more plastic [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:52, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:54, 1 December 2015 (PST)\n# Sounds a proximity alarm [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 06:59, 3 December 2015 (PST)\n# print different sections at different times to have fully moveable parts. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 06:59, 3 December 2015 (PST)\n# print in sections to allow time for hot end to stabilize [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)\n# play note when print is done [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)\n# play a noise cancelation note to quite all noise from printer [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:49, 3 December 2015 (PST)\n# play noise when print has error [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)\n# sense when hot end has been detached and stop all movement. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)\n# auto removal of finished print, start another instantly [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST)\n# earthquake powered 3D printer. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:53, 3 December 2015 (PST)\n# '''Wipe off pad to remove excess filament from nozzle'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:42, 1 December 2016 (PST)\n# '''Automatic bed scraper to lift part and also clean bed'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)\n# Phone app to remotely start and stop printer [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)\n# '''Phone app to remotely watch printer using webcam'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)\n# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)\n# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)\n# pause after layers of printing to prevent failed overhangs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# change frequency of stepper motors to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# pulse the hot end to prevent clogs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# pulse the incoming filament to remove dust [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# pulse the duty cycle of the fan to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# add a frequency to the glass to create a heated bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# '''wipe the hot end between distant points to prevent stringing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strength[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# while using multiple 3D printers use canceling frequencies to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# '''automatic bed cleaning [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# different print temperatures for different layers[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# different fan speeds at different temperatures [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# print at different start times with multiple printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# higher quality stepper motor for better resolution [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# '''find frequency of stepper motors and play a canceling frequency to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# '''smooth a printed object with a laser pulsed over the object [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# auto bed leveling [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# pulsed rods for detection of print head knock off [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)\n# Print in bursts rather than continuously [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Heat extruder head in bursts rather than continuously attempting to maintain temp to reduce energy [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Print walls and infill in different time points to maintain continuous printing of those parts [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Make controlled environment and use fans in bursts to maintain temp [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Travel in bursts for reduced noise\n# Use large vat of melted filament and pressure to extrude so extrusion of filament is only in bursts [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer between different parts on the same print to reduce stringing [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer between different layers to increase print quality [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer between printing the wall and the infill to decrease potential problems [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer after heating up to ensure homogenous heating of the hot end [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# '''Pause longer after heating up to ensure homogenous heating of the print bed [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer when calibrating to ensure proper calibration [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n# Pause longer before changing direction of motors [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}\n\n[[Category:4777 TRIZ 3D printers]]"}