{"id":64937,"key":"Obvious_3D_printer_technology_based_on_02._Extraction","title":"Obvious 3D printer technology based on 02. Extraction","latest":{"id":1210073,"timestamp":"2025-11-28T04:05:15Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n{{TRIZ-3D}}\n\n[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:17, 1 December 2015 (PST)\n[[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:19, 1 December 2015 (PST)\n\n# Smart slicing based on the printer, uploading the model to the printer should slice and create the gcode locally. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:53, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 3 December 2015 (PST)\n# Remove print head and use concentrated sunlight on a powder/gel to build the print [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:52, 1 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:32, 3 December 2015 (PST)\n# Remove the motors, replace the mechanical pulley system with electromagnets to move the belt up and down. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:51, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:53, 1 December 2015 (PST)\n# To make it safer, remove the hotend and print with foam (or other low temp materials)[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:32, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 3 December 2015 (PST)\n# Subtractive 3D printing with syringe from gel [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:34, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:37, 3 December 2015 (PST)\n# Reduce the cost of the printer by removing most of the electronics and having the computer have more direct control of the printer [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:37, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 3 December 2015 (PST)\n# Reduce waste by having none. Recycle failed prints right back into the printer with a built in recycler[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:43, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 3 December 2015 (PST)\n# Remove atmosphere to reduce friction so that you can print faster[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:47, 3 December 2015 (PST)\n# Remove atmosphere to improve print quality because less containments in the air[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:47, 3 December 2015 (PST)\n# Remove hotend print with lasers [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:47, 3 December 2015 (PST)\n# Remove extruder drive, use gravity system instead [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:47, 3 December 2015 (PST)\n# Remove the complicated bits (assembling the printer and making models) of 3D printing to make it more widely adopted and thus everywhere [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:49, 3 December 2015 (PST)\n# Remove printer bed as the constraint for volume, print anywhere with a mobile 3D printer frame [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:50, 3 December 2015 (PST)\n# Remove the print bed, allow the printer to print on any surface [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 06:50, 4 December 2018 (PST)\n# Reduce the number of parts/motors by using lasers to heat up/deposit printing material [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# '''Move excess heat from the stepper motors to create a heated bed''' [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Take out the connected PC interface by sending designs to the printer wirelessly, and monitoring it on a screen [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Create joints and other printed components with high tolerances and structural rigidity to eliminate the use of the extra wood components [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Reduce heat/noise from motors by eliminating them and using a stepped magnetic track to control axis movement [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Implement snap joints and press fits to eliminate the use of fasteners [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Implement magnetic joints to eliminate fasteners [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# '''Have the printer create the g-code of the model dynamically (layer by layer) to allow for quick adjustments on the fly and removing the use of a third party slicer''' [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Have the printer use low temp materials to eliminate the use of the hot-end [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Use stainless steel guide rods to prevent rusting instead of using grease [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Use sonic levitation too allow the printer to print on a thin strip of air, removing use of print bed. [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:08, 4 December 2018 (PST)\n# Use of higher resolution stepper motors to print at a higher resolution and with less noise [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST)\n# Use excess noise and vibration to run a small generator to make extra power to run the printer [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST)\n# Use E-mag waves in the air from power lines, cell phone towers, radio towers to power the printer, eliminating the wall plug. [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST)\n# Place high efficiency solar cells to the printer to eliminate the power supply [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST)\n# Use human energy to run [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:13, 4 December 2018 (PST)\n# '''Remove part cooling fan, use excess heat from hotend to heat a thermal powered fan to cool part''' [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST)\n# '''Use horizontal lazer/UV field to instantaneously cure liquid resin from FDM nozzle''' [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST)\n# Remove extruder motor, Use gravity driven filament driver gear and electrically controlled brake to feed filament [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST)\n# Remove auto bed leveling, use floatation to level printer and print bed, then fix mechanically in place [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:27, 4 December 2018 (PST)\n\n{{Page data\n| license = CC-BY-SA-3.0\n| description = Appropedia collects practical ideas to make 3D printers work better—without losing sight of sharing and local repair.\n}}\n\n[[Category:4777 TRIZ 3D printers]]"}