{"id":64935,"key":"Obvious_3D_printer_technology_based_on_01._Segmentation","title":"Obvious 3D printer technology based on 01. Segmentation","latest":{"id":1210828,"timestamp":"2025-11-28T12:32:51Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n \n\n{{TRIZ-3D}}\n\n[[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:17, 1 December 2015 (PST)\n[[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:18, 1 December 2015 (PST)\n\n# Ants with print heads on them [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# Print with colonies of ants [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# Independent print heads for different materials [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# Breakup the parts of the printer so that it is locally sourced \"junk\" [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# '''Tablet interface, click on picture form online repository and it auto downloads, slices, and sends the gcode to the printer.''' [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# Nanobots that mate with nanobots of the connecting part [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 1 December 2015 (PST)\n# Nanobots that maintain the integrity of the machine [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:44, 1 December 2015 (PST)\n# '''Part picker and 3D printer in one that places electrical components in desired locations as the print is made.''' [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:33, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:42, 1 December 2015 (PST)\n# Gather \"lost\" energy on indiviudal parts, i.e. heat exchanger on hotend to heat water to steam and power a small turbine to recoup some of that loss. Also attach with motors since those can get hot as well. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:49, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 06:52, 3 December 2015 (PST)\n# Printers hooked up in parallel to print large parts together. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:44, 1 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:23, 3 December 2015 (PST)\n# Reduce waste by reducing the number of failed prints due to poor bed adhesion by having a quick adhesion test before long prints [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 06:59, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:01, 3 December 2015 (PST)\n# '''Reduce parts by reducing a 3D printer to a pen-like device where you manually control the extrusion of the material.''' [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:02, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:23, 3 December 2015 (PST)\n# '''MULTIPLE''' Spaceships with lava guns, with the materials need to create planetary bodies. [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:21, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST)\n# Camera and slicer overlay to check to see if the print is going as planned [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:18, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST)\n# 3D scanner, part picker and printer all in one (scanner on the arms of the printer/three different head atachments) so that you can place an item in the printer and have it scan, move and print a replica [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:15, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST)\n# '''Large scale printer with part picker/crane to create buildings''' [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:12, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST)\n# Array of printer heads that simultaneously print array of parts [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:12, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST)\n# Not segmentation, but printing in a vacuum so that you can print in ‘space’ and not have to print on a bed [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:12, 3 December 2015 (PST)\n# '''make certain joints on the 3DP detachable/movable to “build” a larger printer from smaller printers.''' [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:04, 3 December 2015 (PST)\n# Segment the printer head to have different channels to print two materials simultaneously (maybe even at different temperatures.) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:04, 3 December 2015 (PST)\n# Attach printer heads to robotics arms to reduce print time and reduce overhang. [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:04, 3 December 2015 (PST) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:06, 3 December 2015 (PST)\n# Reduce cost of materials by having a reclaimer break down objects to base components to be used in printing. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:06, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:23, 3 December 2015 (PST)\n# Easier to maintain by sensors knowing the next likely part to fail, and printing the replacement part for it. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:09, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:23, 3 December 2015 (PST)\n# Make the frame of the 3D printer out of spent fuel rods so that the printing environment is warm to prevent warping. (also provides a heated bed) [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:17, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:23, 3 December 2015 (PST)\n# Enable auto calibration by segmenting the process so that calibration occurs before each print based on laser readings. Which also reduces waste from failed prints due to poor calibration. [[User:Bllafata|Bllafata]] ([[User talk:Bllafata|talk]]) 07:25, 3 December 2015 (PST) [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:25, 3 December 2015 (PST)\n# 3D print secure dovetail joints for connecting 3D printer structural parts [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:02, 4 December 2018 (PST)\n# Print a template for cutting out the wood portions of the printer accurately for making multiple printers/ manufacturing[[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:02, 4 December 2018 (PST)\n# print/ create a case to hold all disassembled parts of collapsible 3D printer securely and compactly [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:02, 4 December 2018 (PST)\n# Create a belt-driven bed (treadmill) for infinite printing bed space [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:02, 4 December 2018 (PST)\n# Create flat material feed (boards/flat stock) to be printed on (semi-infinite print bed) [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Replace all screws with 3D filament welding securing style [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Removable pre-3D printed beds that are clamped down (\"waffers\") [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# 3D printed container to hold electronics board kits together and protect from dust/debris [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# 3D printed screws from a harder plastic to be used in fastening softer plastics [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Modular 3D printer head assemblies for 1/2/3/4+ extruder nozzles [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Print segmented control arm rods to fine tune and adjust printing speed/resolution [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Use strong electromagnets to hold disassembled printer parts together [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:13, 4 December 2018 (PST)\n# Use nano machines to assemble/disassemble the printer [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:26, 4 December 2018 (PST)\n# Modular print heads to easily switch between printing with one or more filaments [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:26, 4 December 2018 (PST)\n# Use magnetic joints/ snap joints/ press fit joints to allow for easy assembly/disassembly. [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:26, 4 December 2018 (PST)\n# Have multiple spools with extruders and an arm that can switch between the spools at the hot end [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:26, 4 December 2018 (PST)\n# Use a cell phone/ multiple cell phones/ cloud computers as the main computing device [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 07:26, 4 December 2018 (PST)\n\n{{Page data\n| license = CC-BY-SA-3.0\n| description = Small, obvious improvements can lead to big gains. Appropedia shares 3D printing tweaks that bypass patents and encourage shared design.\n}}\n\n[[Category:4777 TRIZ 3D printers]]"}