{"id":82590,"key":"Multimeter_Negative_Probe_Holder","title":"Multimeter Negative Probe Holder","latest":{"id":1112272,"timestamp":"2024-06-18T21:29:07Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n[[File:Fgaiken probeholder.jpg|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.myminifactory.com/object/3d-print-athena-2-multimeter-negative-probe-holder-104960\n}}\n\n{{Project data\n| authors = User:Fgaiken\n| years = 2019\n| made = Yes\n| replicated = No\n| type = Multimeter negative probe holder\n}}\n\n<!-- Limit the depth of the table of contents. -->\n<!-- Mark this as an MSE4777 page thru MTU -->\n\nThis tool is used to hold the negative probe when reading voltages on motor control boards for the Athena2 3D printer. It could be modified to fit another printer setup. The model was created using FreeCAD.\n\n== Understanding the market ==\n\nThis product is complete and it functions as a negative probe holder. A video of it functioning can be found in the link below:\n\nhttps://www.youtube.com/watch?v=eBmED1PZYD0&feature=youtu.be\n\n== Project goals ==\n\n# Item should hold the negative probe so that two hands are free to measure motor control board voltages.\n\n== Design ==\n\nFreeCAD, STL and gcode files are attached:\n\nhttps://www.myminifactory.com/object/3d-print-athena-2-multimeter-negative-probe-holder-104960\n\n=== 3-D Printable Parts ===\n\nThe entire tool is 3D printable.\n\n<!-- == Contact details ==\n\nAdd your contact information. -->\n\n{{Page data\n| keywords = 3D printing, circuit measurements, multimeter, negative probe holder, plastic\n| sdg = SDG08 Decent work and economic growth\n| published = 2019\n| organizations = MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:3D printing]]\n[[Category:Plastic]]"}