{"id":81122,"key":"Lulzot_Bioprinter","title":"Lulzot Bioprinter","latest":{"id":1205467,"timestamp":"2025-11-27T15:38:05Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{MOST}}\n\n== Lulzbot Bioprinter Study & Methods ==\n\nAuthored by Samantha Dertinger and Nicki Gallup\n\n[[File:BioPrinter Lulz.jpg|500px]]\n\n=== Methods ===\n\n* Turn the printer on by flipping the power switch. The printer will ask if you would like to run a configuration test to re-home the device, click yes.\n* After the homing process is complete, click on 'Menu' to set the desired settings for the printer.\n* Manually place the syringe needle in the middle of the Petri dish, making sure the needle is not touching the dish.\n* Press 'Media' to see the downloaded Gcode files and the 'Print' button.\n* Press 'Print' to start the printing process. The printer should automatically start printing.\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}\n\n[[Category:MOST methods]]"}