{"Page SDG":["SDG04 Quality education"],"Page URL":["https://www.appropedia.org/Low_Profile_Projector_Ceiling_Mount"],"Page affiliations":["Category:MOST","Category:Michigan Technological University","MSE4777"],"Page description":["The device designed for this project was a Low Profile Projector Ceiling Mount. After gifting my parents a projector for a soon to be home theater project, I realized I had not purchased a proper ceiling mount for the device. However, unlike more expensive models, there were no aftermarket mounts available for this projector as it is advertised as a portable projector, and not a home theater version. Utilizing the standard 1/4\" camera mounting thread on the base of the projector, I was able to purchase a high quality ball swivel from Amazon that is used to mount cameras. I then designed a low profile bracket that had a small shelf to manage the power supply, 4 through holes for attaching it to the ceiling, as well as a counter bored hex nut to secure the ball swivel to the bracket. Once the mount was assembled and placed on the ceiling, the projector was attached and the picture was leveled on the wall. This solved a problem in a very quick manner as well as provided me the option to make it lower in profile than other commercial variants which is extremely important due to the lower ceilings in this room. If an aftermarket one was fabricated to work with this projector, it would not be short enough to provide clearance for people walking underneath of it."],"Page image":["File:Projector Mount.jpg"],"Page keywords":["3D printing","ceiling mount","classroom projector","home theater","osat","pla plastic"],"Page language":["en"],"Page license":["CC-BY-SA-3.0"],"Page title":["Low Profile Projector Ceiling Mount"],"Page views":[203],"Page year":["Tuesday, 01-Jan-19 00:00:00 UTC"],"Project authors":["User:David Eychaner"],"Project cost":[13.75],"Project thumb":["https://www.appropedia.org/w/images/thumb/0/05/Projector_Mount.jpg/330px-Projector_Mount.jpg"],"Project type":["Projector mount"],"Project was made":[true],"Project was replicated":[false],"Project year":["Tuesday, 01-Jan-19 00:00:00 UTC"],"Modification date":["Tuesday, 18-Jun-24 22:34:07 UTC"]}