{"id":59006,"key":"Handlebar_grips","title":"Handlebar grips","latest":{"id":1111611,"timestamp":"2024-06-18T18:19:18Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n[[File:Grip1.jpg|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.thingiverse.com/thing:577616\n}}\n\n{{Project data\n| authors = User:Ab91\n| years = 2014\n| made = Yes\n| replicated = No\n| cost = USD 0.6\n}}\n\nHandlebar grip for a bicycle developed by [[User:Ab91|Abhijeet Divekar]]\n\nThis part was built to meet the needs of one of our professors; [https://www.mtu.edu/enterprise/program/advisors/gershenson/ Dr. Greshenson], that heads a bike Enterprise program at Michigan Tech.\n\n== Bill of Materials ==\n\n# No additional materials needed. Open source softwares, computer and RepRap is all you need.\n## [https://www.thingiverse.com/thing:577616 SCAD]\n## [https://www.thingiverse.com/thing:577616 STL]\n\n== Tools needed ==\n\n# [[Delta Build Overview:MOST|MOST Delta RepRap]] or similar RepRap 3-D printer\n# [https://www.openscad.org/ OpenSCAD]\n# Slicing Software, like [http://software.ultimaker.com/ Cura] or [http://slic3r.org/ Slic3r]\n\n== Skills and knowledge needed ==\n\n* No special skill(s) needed.\n\n== Technical Specifications and Assembly Instructions ==\n\nNo special instructions needed. Pretty straight-forward.\n\n=== Common Problems and Solutions ===\n\n* Include common mistakes/problems to avoid in building your OSAT and how to overcome them\n\n== Cost savings ==\n\n* If your solution is not a low cost one then it is not really appropriate.\n\nTypical handlebar grip costs anywhere between $3 - $8 [https://www.amazon.com/s/ref=nb_sb_ss_i_0_10?url=search-alias%3Daps&field-keywords=handlebar+grips&sprefix=handlebar+%2Caps%2C169 Amazon]. The 3D printed equivalent costs about 60 cents for a pair. So the cost basically reduced about 10 times the commercial equivalent.\n\n== References ==\n\n* Dr. Greshenson's Lab for measurements.\n\n{{Page data\n| keywords = 3D printing, bicycle, bike handlebar grips, osat, plastic\n| sdg = SDG09 Industry innovation and infrastructure, SDG11 Sustainable cities and communities\n| published = 2014\n| organizations = MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:OSAT 3D-Printable Designs]]\n[[Category:3D printing]]\n[[Category:Plastic]]"}