{"id":70005,"key":"GPS_Belt_Clip","title":"GPS Belt Clip","latest":{"id":1111588,"timestamp":"2024-06-18T18:15:05Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"[[File:GPS clip.JPG|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.youmagine.com/designs/garmin-gps-clip\n}}\n\n{{Project data\n| authors = User:vmmclain\n| years = 2016\n| made = No\n| replicated = No\n}}\n\n{{777 notice}}\n\nAs a member of Superior Search and Rescue, I find myself using a GPS frequently during training exercises or actual searches. At times, it can be inconvenient to continuosly remove my GPS from a pocket or backpack in order to navigate. This GPS clip is an attempt to alleviate that issue by allowing a user to mount a GPS to a belt, backpack strap, or other webbing attachment.\n\n== Bill of Materials ==\n\n* BOM - https://www.youmagine.com/designs/garmin-gps-clip\n## 1.75mm Filament\n## 2-Part Plastic Epoxy\n\n== Tools needed ==\n\n# [[Athena Build Overview|MOST Delta RepRap]] or similar RepRap 3-D printer\n\n== Skills and knowledge needed ==\n\n* 3D printer and slicing software for the provided STL's\n\n== Technical Specifications and Assembly Instructions ==\n\n# Both the mount and clip will printed in under a half an hour\n# Both files should be printed at 0.2 mm layer height with a 30% infill.\n\n{{Page data\n| keywords = 3D printing, GPS, belt clip, navigation, plastic\n| sdg = SDG09 Industry innovation and infrastructure\n| published = 2016\n| organizations = MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:3D printing]]\n[[Category:Plastic]]"}