{"id":69611,"key":"Flat_Specimen_Holder","title":"Flat Specimen Holder","latest":{"id":1206099,"timestamp":"2025-11-27T19:31:01Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"[[File:Flat Specimen Holder.jpg|thumb|Flat Specimen Holder Prototype]]\n\n== Team ==\n\n'''John CI Smith''' Undergraduate Student, Materials Science & Engineering\n\n== Project ==\n\n'''Flat Specimen Holder'''\n\n[http://3dprint.nih.gov/discover/3dpx-004044 CLICK HERE FOR SOURCE FILES]\n\nAn open source flat specimen holder for corrosion testing that can be easily printed for any lab. Saving both time and money.\n\nA commercial flat specimen holder would cost approximately $915, this holder will cost approximately $0.53 to print.\nIt can be printed in under an hour. which would be much faster than if you had to order and ship one.\n\n== Prototype ==\n\n'''Bill Of Materials'''\n\n* 1x 13x16x2 mm O'Ring at $0.48 per\n* Approximately 7 grams of PLA or equivalent filament at $0.007 per gram. $0.05\n\nTotal Cost ~ $0.53 //\nTotal Savings ~ $914.47\n\n'''Installation and Use'''\n\n* Install 13x16x2 mm O'ring to base before testing.\n\n== Printable Parts ==\n\n<gallery>\nFile:Flat Specimen Holder Stl.JPG|Flat Specimen Holder\nFile:Flat Specimen Base Stl.JPG|Flat Specimen Holder Base\nFile:Flat Specimen Top Stl.JPG|Flat Specimen Holder Top\n</gallery>\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}\n\n[[Category:Devices]]"}