{"id":69664,"key":"Field_Ready_Design_-_ECG_Lead_Holder","title":"Field Ready Design - ECG Lead Holder","latest":{"id":1111595,"timestamp":"2024-06-18T18:15:23Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{777 notice}}\n\n[[File:Fieldready ECG 2.JPG|thumb]]\n\n{{Device data\n| manufacturing-files = https://www.youmagine.com/designs/field-ready-ecg-limb-lead\n}}\n\n{{Project data\n| authors = User:Remichae\n| years = 2016\n| made = Yes\n| replicated = No\n| cost = USD 0.35\n| type = ECG field holder\n}}\n\n# This design was created in response to a design request submitted by Field Ready, a non-profit 501c3, that seeks to make field ready humanitarian solutions to problems across the world. The design fulfills the need for a cheap single 3D print that will function as a ECG limb lead holder. The device was designed using dimensions similar to the previous device used as requested.\n# Requested parameters for the printed part are as follows:\n## 3D printable as a single item (not made up of multiple parts)\n## Similar Dimensions to original part\n## Quick, easy, and intuitive to use\n## Contain an appropriate placed hole such that existing sensors can be attached\n\n[[File:Fieldready ECG.JPG|thumb|Completed Print]]\n\n== Bill of Materials ==\n\n# Single Part file designed using FreeCad. The device was printed using Hatchbox translucent orange PLA with a 10% infill originally.\n## Upload and link to all source files from open source CAD\n### Free Cad File Version 1 (No Supports): [[File:ECG LIMB LEAD.FCStd]]\n### Free Cad File Version 2 (Support Members): [[File:ECG Limb Lead V2.FCStd]]\n## Uploaded STL\n### https://www.youmagine.com/designs/field-ready-ecg-limb-lead\n\n== Tools needed ==\n\n# [[Athena Build Overview|MOST Delta RepRap]] or similar RepRap 3-D printer\n\n== Technical Specifications and Assembly Instructions ==\n\n# Printing Instructions:\n## Print Speed: 100 mm/S\n## Fill Density: 10%\n## Layer Height:.20 mm\n## Support Type: Everywhere\n## Platform Adhesion Type: Brim (10 lines)\n# Print time estimate: 55 minutes\n# There is no necessary assembly\n\n=== Common Problems and Solutions ===\n\n* Curling of 3D print off of print bed - Due to the thin cross-sectional area it might be necessary to use a brim or skirt to secure the lower layers of the print to your print bed\n\n== Cost savings ==\n\n# Estimated Cost ~ $0.35 depending on filament price\n# No Commercial equivalent of dry electrodes\n## Disposable ECG Electrodes sell at $7.50 for a 50 pack but are not available in many developing countries https://www.cablesandsensors.com/products/disposable-ecg-electrodes?utm_medium=cpc&utm_source=googlepla&variant=3536265092&gclid=CNaN9_GNsNACFYEdgQodJjAOaw\n\n{{Page data\n| keywords = 3D printing, ECG leads, holder, osat, plastic\n| sdg = SDG03 Good health and well-being, SDG10 Reduced inequalities\n| published = 2016\n| organizations = MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab, MY4777\n| license = CC-BY-SA-3.0\n| language = en\n}}\n\n[[Category:How tos]]\n[[Category:Medical devices]]\n[[Category:OSAT 3D-Printable Designs]]\n[[Category:3D printing]]\n[[Category:Plastic]]"}