{"Device hardware license":["CERN-OHL-S"],"Page SDG":["SDG06 Clean water and sanitation"],"Page URL":["https://www.appropedia.org/Contoured_Spigot_for_5-gallon_buckets"],"Page affiliations":["Category:MOST","Category:Michigan Technological University"],"Page description":["Spigots manufactured for self-attachment typically rely on large gaskets to maintain a seal, which works with varying success on the curved surface of a bucket. By modeling a bucket with just its top and bottom diameters and its average thickness, it's easy to design a spigot with contours that fit well. This design is expected to fit a wide range of bucket sizes effectively. The main attachment is reasonably easy to print, and typical modification requires changing only 4 parameters in two files."],"Page image":["File:Twfuller spigot 3.jpg"],"Page keywords":["3D printing","bucket","faucet","nozzle","osat","spigot","tap","Plastic"],"Page language":["en"],"Page license":["CC-BY-SA-3.0"],"Page title":["Contoured Spigot for 5-gallon buckets"],"Page views":[155],"Page year":["Wednesday, 01-Jan-14 00:00:00 UTC"],"Project authors":["User:Twfuller"],"Project thumb":["https://www.appropedia.org/w/images/thumb/b/b3/Twfuller_spigot_3.jpg/330px-Twfuller_spigot_3.jpg"],"Project was made":[true],"Project was replicated":[false],"Project year":["Wednesday, 01-Jan-14 00:00:00 UTC"],"Modification date":["Wednesday, 02-Sep-26 12:56:01 UTC"]}