{"id":55416,"key":"Backpack_Delta:_Building_the_Towers","title":"Backpack Delta: Building the Towers","latest":{"id":1215368,"timestamp":"2025-12-11T18:50:13Z"},"content_model":"wikitext","license":{"url":"https://www.appropedia.org/Appropedia:Copyrights","title":"CC-BY-SA-4.0"},"source":"{{MOST}}\n\n{{MOST-RepRap}}\n\n{{MOST Backpack Delta navigation}}\n\n''' Constructing the Drive Towers '''\t\t\t\t\t\t\t\t\n\n=== Before You Begin ===\n\n\t\n\n* \tThe parts required for the Upper Platform are:\n** \tHardware:\n*** \t 3 - Segments of T5 Belt\n*** \t 6 - LM6UU Linear Bearings\n*** \t 3 - M3 x 10 Socket Cap Screw\n*** \t 3 - M3 x 20 Socket Cap Screw\n*** \t 6 - 1 Foot segments of 6mm Smooth Rod\n*** \t 24 - M3 x 16 Socket Cap Screw\n*** \t 51 - M3 Flat washers\n*** \t 27 - M3 Nuts\n*** \t 12 - Thin Zip Ties\n*** \t 3 - Thick Zip Ties\n** \tPrinted Parts:\n*** \t 3 - Carriage\n*** \t 3 - Short Belt Terminators\n*** \t 3 - Long Belt Terminators\n** \tRequired Tools:\n*** \t 1.5mm Allen Wrench\n*** \t2.5mm Allen Wrench\n*** \t5.5mm Combination wrench\n*** \t Needle Nose Pliers\n** \tRecommended Tools:\n*** \t3mm or 1/8” Drill bit\n\n'''\n\n== This segment of build process is not available ==\n\n'''\n\n=== Building the Towers ===\n\n{{Page data\n| license = CC-BY-SA-3.0\n}}"}