You do not have permission to edit this page, for the following reason:
You must confirm your email address before editing pages.
Please set and validate your email address through your user preferences.
To edit this page, please answer the question that appears below (more info):
The word 'Appropedia' comes from 'Appropriate' and...?
==Title of the device or system ==
[[Image:BTJ_water_bottle_filter_main.jpg|600px|Water bottle filter overview]]
Project developed by Benjamin Joseph [[User:Btjoseph|Btjoseph]] ([[User talk:Btjoseph|talk]]) 16:57, 5 December 2018 (PST)
Many developing third-world countries have a steady or increasing need for clean drinking water. Many solutions for achieving clean drinking water already exist, but require expensive manufacturing equipment outside the area where there is a need, and then incur shipping charges to ship them to the target location. 3D printing technologies allow rapid manufacture of humanitarian-aid devices such as water purification tools. This printable design requires some filament (preferable ABS), a tea bag, and activated carbon to create. This allows the user to drink filtered water on-demand from and standard plastic water or pop bottle.
== Bill of Materials==
# One bag holder: [STL] https://www.dropbox.com/s/m304isdsx3zttvk/bagHolder.stl?dl=0 [OpenSCAD] https://www.dropbox.com/s/8o9cin6t8afvpzx/bagHolder.scad?dl=0
# One bottle cap: [STL] https://www.dropbox.com/s/newoc354qbt4e34/bottle_cap.stl?dl=0 [OpenSCAD] https://www.dropbox.com/s/vygh1cng4045tv7/bottleCap.scad?dl=0( Bottle cap also required thread component: https://www.dropbox.com/s/xcsaov23rt63dbe/Thread_Library.scad?dl=0)
# One tea bag
# activated carbon ( about a teaspoon)
== Costs ==
# The activated carbon was obtained by cutting open a $6 Breta water filter (if bought in a six pack for $24) from Walmart. the carbon from one filter was able to fill 12 tea bags, making the carbon cost per bag $0.50. Activated carbon may likely be found cheaper than by using this method.
# Tea bags are available from Walmart in 100-count boxes for $3.50, yielding a unit price of $0.04 if rounded up.
# Cura estimates both parts will cost $0.51 to print.
Total cost: $0.50 + $0.04 + $0.51 = $1.05
The cheapest equivalent water bottle with an internal filter costs $10. This is a cost savings of just under 90%.
== Tools needed for fabrication of the OSAT==
# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer
# No other tools!
== Technical Specifications and Assembly Instructions==
|Image:BTJ_cap.png| Print bottle cap at .2mm layer height or less, with the threads at the top, without supports. Support material clogs up the threads, creating unnecessary cleanup work. Estimated print time at 70mm/s: 22 minutes.
|Image:BTJ_holder.PNG| Print the tea bag holder as shown at .3mm layer height. Estimated print time at 70mm/s: 42 minutes.
|Image:BTJ_bag.jpg| Cut open a teabag at an edge and add one teaspoon activated carbon.
|Image:BTJ_bag_holder.jpg| Stuff tea bag with carbon into the large end of the bag holder.
|Image:BTJ_cap_bottle.jpg| Screw cap onto bottle threads.
|Image:BTJ_filter together.jpg| Fully seat the cap into the tea bag holder.
== Benefited Internet Communities ==
*[https://www.brita.com/filter-replacement-reminders/?ds_rl=1240926&ds_rl=1238837&ds_rl=1252549&gclid=Cj0KCQiAi57gBRDqARIsABhDSMoMp9C0aSNbX1ZXMDt93nTqHNVkP47fHaTe5WglEyox9Ib2Kn3kM60aAqkBEALw_wcB&gclsrc=aw.ds Brita Filters]
*[https://www.worldvision.org/our-work/clean-water World Vision]
*[https://www.un.org/sustainabledevelopment/water-and-sanitation/ The United Nations]
*[https://www.triplepundit.com/podium/problems-solutions-safe-water-africa/ Triple Pundit - People, Planet, Profit]
<ref> web page: *Primal Survivor.net Available: https://www.primalsurvivor.net/ways-to-purify-water-survival/
[[category:OSAT 3D-Printable Designs]]