Difference between revisions of "User:D. McLaughlin"

From Appropedia
Jump to navigation Jump to search
m
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
I have recently graduated with a Master’s of Applied Science (M.A.Sc.) from the Mechanical and Materials Engineering Department at Queen’s University.  
+
I have recently graduated with a Master’s of Applied Science (M.A.Sc.) in mechanical and materials engineering with a focus in photovoltaics from Queen’s University.  
  
I received my B.Sc. Honours in Chemical Engineering  - Environmental Option at Queen’s. [[InGaN photovoltaics in the Queen's Applied Sustainabilty Group|My research]] focused on the III-V semiconductor indium gallium nitride (InGaN) for use in photovoltaics. Additional projects include: a technical and economic analysis for a First Nations community to become completely solar powered; and a successful push to make Queen's University deploy rooftop and ground-mounted solar PV arrays.
+
I received my B.Sc. Honours in chemical engineering in the environmental stream at Queen’s. [[InGaN photovoltaics in the Queen's Applied Sustainabilty Group|My research]] focused on the III-V semiconductor indium gallium nitride (InGaN) for use in photovoltaics. Additional projects include: a technical and economic analysis for a First Nations community to become completely solar powered; and a successful push to make Queen's University deploy rooftop and ground-mounted solar PV arrays.
  
 
[[Category:Queens Applied Sustainability Group]]
 
[[Category:Queens Applied Sustainability Group]]
Line 7: Line 7:
  
 
'''The completed manuscript thesis entitled "Optical Characterization of Indium Gallium Nitride for Application in High-Efficiency Solar Photovoltaic Cells" is on hold until papers are published'''
 
'''The completed manuscript thesis entitled "Optical Characterization of Indium Gallium Nitride for Application in High-Efficiency Solar Photovoltaic Cells" is on hold until papers are published'''
 
  
 
==Thesis Outline==
 
==Thesis Outline==
Line 41: Line 40:
  
 
==Published Papers==
 
==Published Papers==
Primary Author: [[Leveraging_solar_photovoltaic_technology_for_sustainable_development_in_Ontario's_aboriginal_communities|Leveraging Solar Photovoltaic Technology For Sustainable Development in Ontario's Aboriginal Communities]]
+
'''Primary Author:'''
 +
 
 +
[[Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells]] 
 +
 
 +
[[Leveraging_solar_photovoltaic_technology_for_sustainable_development_in_Ontario's_aboriginal_communities|Leveraging Solar Photovoltaic Technology For Sustainable Development in Ontario's Aboriginal Communities]]
 +
 
 +
'''Co-Author:'''
 +
 
 +
[[Effects of Substrate Temperature on Indium Gallium Nitride Nanocolumn Crystal Growth]]
  
Co-Author: [[Effects of Substrate Temperature on Indium Gallium Nitride Nanocolumn Crystal Growth]]
 
  
Two additional papers are under review
+
One additional paper is under review

Latest revision as of 18:59, 15 February 2012

I have recently graduated with a Master’s of Applied Science (M.A.Sc.) in mechanical and materials engineering with a focus in photovoltaics from Queen’s University.

I received my B.Sc. Honours in chemical engineering in the environmental stream at Queen’s. My research focused on the III-V semiconductor indium gallium nitride (InGaN) for use in photovoltaics. Additional projects include: a technical and economic analysis for a First Nations community to become completely solar powered; and a successful push to make Queen's University deploy rooftop and ground-mounted solar PV arrays.


The completed manuscript thesis entitled "Optical Characterization of Indium Gallium Nitride for Application in High-Efficiency Solar Photovoltaic Cells" is on hold until papers are published

Thesis Outline[edit | edit source]

Introduction/Background[edit | edit source]

  • Solar PV potential, benefits
  • Unique properties of InGaN (varying band gap with composition), its promise as a semiconducting material for PV, multi-junction solar cells

Literature Review[edit | edit source]

  • Summary of previous InGaN work

Methodology[edit | edit source]

  • Procedures and equipment used for characterization of the films using:
  • Ellipsometer
  • Photoluminescence
  • SEM
  • SIMS
  • EDX
  • Solar simulator - photoconductivity

Papers[edit | edit source]

  • chapters of manuscript thesis

Discussion[edit | edit source]

  • Explain characterization results and relate them to advantages/disadvantages for use in PV cells

Future Work[edit | edit source]

  • Cover any lingering problems/difficulties with creating an InGaN cell

Conclusions[edit | edit source]

References[edit | edit source]

Published Papers[edit | edit source]

Primary Author:

Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells

Leveraging Solar Photovoltaic Technology For Sustainable Development in Ontario's Aboriginal Communities

Co-Author:

Effects of Substrate Temperature on Indium Gallium Nitride Nanocolumn Crystal Growth


One additional paper is under review