Photovoltaic Literature Reviews
|Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing and recycling.
Abstract:Reasons for choosing Etching process
Reference:Award-Winning Etching Process Cuts Solar Cell Costs (Revised) (Fact Sheet), The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) - 50063.pdf
Abstract:Comparision among Silicon oxide,titanium oxide and Pure Sillicon as ARC in Etching Process
Conclusion:Sillicon oxide is the best ARC,which enhanced 20.6% in short circuit current,decreasing reflection,thus improving efficiency.
Reference:Etching, Evaporated Contacts and Antireflection Coating on Multicrystalline Silicon Solar Cell Author:A. Ibrahim, A.A. El Amin
---etching by means of reactive ion etching with SF6, or CHF3,/SF6,. ---Two type of ARC used:
(A)Graphaite Covered with conducting Sic,the graphite acts as base contact of the cells. (B) Graphite encapsulated with insulating Sic- and Si02/SiN/Si02-layers (ONO) leads to solar cells on insulating foreign substrates in Method B,the efficiency was improved by 11%:
future scope:same experiment using wet processing
Reference:Ludemann, R., Schaefer, S., Schule, C. and Hebling, C., 1997, January. Dry processing of mc-silicon thin-film solar cells on foreign substrates leading to 11% efficiency. In Photovoltaic Specialists Conference, 1997., Conference Record of the Twenty-Sixth IEEE (pp. 159-162). IEEE.
Description:For normally incident light falling upon periodic textures, angles of 45° ensure double-bounce reflectances will occur; angles of 60° yield triple-bounce reflectances at least. As facet tilt angles decrease below a , 45°, less and less light will receive double-bounce incidence, closer to the base of the grooves, until at angles below 30°, no light will receive multiple bounce incidence in air, and reflectance levels are equivalent to that of polished silicon
references: Alkaline Etching for Reflectance Reduction in Multicrystalline Silicon Solar Cells J. D. Hylton,z A. R. Burgers, and W. C. Sinke
Reference:Effect of Ag Particle Size in Thick-Film Ag Paste on the Electrical and Physical Properties of Screen Printed Contacts and Silicon Solar Cells Mohamed M. Hilali,a Kenta Nakayashiki,a Chandra Khadilkar,b Robert C. Reedy,c Ajeet Rohatgi,a Aziz Shaikh,d Steve Kim,d and Srinivasan Sridharanb
Result:Small to medium Ag particles reduce the series resistance,higher shunt resistance,decrease the leakage current and improve the fill factor Thus improving the efficiency by 17.4%