Difference between revisions of "Photovoltaic Literature Reviews"
| Line 26: | Line 26: | ||
in Method B,the efficiency was improved by 11%: | in Method B,the efficiency was improved by 11%: | ||
| − | future scope: | + | future scope:same experiment using wet processing |
| − | same experiment using wet processing | + | |
Reference:Ludemann, R., Schaefer, S., Schule, C. and Hebling, C., 1997, January. Dry processing of mc-silicon thin-film solar cells on foreign substrates leading to 11% efficiency. In Photovoltaic Specialists Conference, 1997., Conference Record of the Twenty-Sixth IEEE (pp. 159-162). IEEE. | Reference:Ludemann, R., Schaefer, S., Schule, C. and Hebling, C., 1997, January. Dry processing of mc-silicon thin-film solar cells on foreign substrates leading to 11% efficiency. In Photovoltaic Specialists Conference, 1997., Conference Record of the Twenty-Sixth IEEE (pp. 159-162). IEEE. | ||
Revision as of 07:39, 19 January 2017
|
Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing and recycling. |
|
1:LINK:"http://www.nrel.gov/docs/fy11osti/50063.pdf"
Abstract:Reasons for choosing Etching process
Reference:Award-Winning Etching Process Cuts Solar Cell Costs (Revised) (Fact Sheet), The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) - 50063.pdf
2:LINK:"http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.1028.556&rep=rep1&type=pdf"
Abstract:Comparision among Silicon oxide,titanium oxide and Pure Sillicon as ARC in Etching Process
Conclusion:Sillicon oxide is the best ARC,which enhanced 20.6% in short circuit current,decreasing reflection,thus improving efficiency.
Reference:Etching, Evaporated Contacts and Antireflection Coating on Multicrystalline Silicon Solar Cell Author:A. Ibrahim, A.A. El Amin
3:link:"http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=654053"
Description:
---etching by means of reactive ion etching with SF6, or CHF3,/SF6,. ---Two type of ARC used:
(A)Graphaite Covered with conducting Sic,the graphite acts as base contact of the cells. (B) Graphite encapsulated with insulating Sic- and Si02/SiN/Si02-layers (ONO) leads to solar cells on insulating foreign substrates in Method B,the efficiency was improved by 11%:
future scope:same experiment using wet processing
Reference:Ludemann, R., Schaefer, S., Schule, C. and Hebling, C., 1997, January. Dry processing of mc-silicon thin-film solar cells on foreign substrates leading to 11% efficiency. In Photovoltaic Specialists Conference, 1997., Conference Record of the Twenty-Sixth IEEE (pp. 159-162). IEEE.