Difference between revisions of "Pearce publications in open source"

From Appropedia
Jump to navigation Jump to search
m
m
 
(2 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
{{Pearce-pubs}}
 
{{Pearce-pubs}}
  
* Arthur Alexandre, Fabio A. Cruz Sanchez, Hakim Boudaoud, Mauricio Camargo, and Joshua M. Pearce.Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers. ''3D Printing and Additive Manufacturing''. 7(5) 2020. [https://doi.org/10.1089/3dp.2019.0195 http://doi.org/10.1089/3dp.2019.0195]  [https://www.academia.edu/42858034/Mechanical_Properties_of_Direct_Waste_Printing_of_Polylactic_Acid_with_Universal_Pellets_Extruder_Comparison_to_Fused_Filament_Fabrication_on_Open-Source_Desktop_Three-Dimensional_Printers open access]
+
* Gallup, N.; Pearce, J.M. The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids. ''Designs'' 2020, 4, 50. ; https://doi.org/10.3390/designs4040050  [https://www.academia.edu/44605084/The_Economics_of_Classroom_3_D_Printing_of_Open_Source_Digital_Designs_of_Learning_Aids open access]
 +
* Arthur Alexandre, Fabio A. Cruz Sanchez, Hakim Boudaoud, Mauricio Camargo, and Joshua M. Pearce.Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers. ''3D Printing and Additive Manufacturing''. 7(5) 2020, 237-247. [https://doi.org/10.1089/3dp.2019.0195 http://doi.org/10.1089/3dp.2019.0195]  [https://www.academia.edu/42858034/Mechanical_Properties_of_Direct_Waste_Printing_of_Polylactic_Acid_with_Universal_Pellets_Extruder_Comparison_to_Fused_Filament_Fabrication_on_Open-Source_Desktop_Three-Dimensional_Printers open access]
 
* Pierce Mayville, Neha Vijay Patil and Joshua M.Pearce. Distributed manufacturing of after market flexible floating photovoltaic modules. ''Sustainable Energy Technologies and Assessments''. 42, 2020, 100830. https://doi.org/10.1016/j.seta.2020.100830 [https://www.academia.edu/44253625/Distributed_Manufacturing_of_After_Market_Flexible_Floating_Photovoltaic_Modules open access]
 
* Pierce Mayville, Neha Vijay Patil and Joshua M.Pearce. Distributed manufacturing of after market flexible floating photovoltaic modules. ''Sustainable Energy Technologies and Assessments''. 42, 2020, 100830. https://doi.org/10.1016/j.seta.2020.100830 [https://www.academia.edu/44253625/Distributed_Manufacturing_of_After_Market_Flexible_Floating_Photovoltaic_Modules open access]
 
*  Little, H.A.; Tanikella, N.G.; J. Reich, M.; Fiedler, M.J.; Snabes, S.L.; Pearce, J.M. Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks. ''Materials'' 2020, 13, 4273.  https://doi.org/10.3390/ma13194273 [https://www.academia.edu/44181380/Towards_Distributed_Recycling_with_Additive_Manufacturing_of_PET_Flake_Feedstocks open access]
 
*  Little, H.A.; Tanikella, N.G.; J. Reich, M.; Fiedler, M.J.; Snabes, S.L.; Pearce, J.M. Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks. ''Materials'' 2020, 13, 4273.  https://doi.org/10.3390/ma13194273 [https://www.academia.edu/44181380/Towards_Distributed_Recycling_with_Additive_Manufacturing_of_PET_Flake_Feedstocks open access]
Line 116: Line 117:
 
* J.M. Pearce, [https://www.elsevier.com/connect/3d-printing-your-lab-equipment-its-cheaper-than-you-think 3D-printing your lab equipment—it’s cheaper than you think] - Elsevier Connect, 2013.
 
* J.M. Pearce, [https://www.elsevier.com/connect/3d-printing-your-lab-equipment-its-cheaper-than-you-think 3D-printing your lab equipment—it’s cheaper than you think] - Elsevier Connect, 2013.
 
* B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), [https://dx.doi.org/10.1016/j.mechatronics.2013.06.002 Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers], ''Mechatronics'' 23, 713-726. [https://www.academia.edu/4067796/Life-Cycle_Economic_Analysis_of_Distributed_Manufacturing_with_Open-Source_3-D_Printers open access]
 
* B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), [https://dx.doi.org/10.1016/j.mechatronics.2013.06.002 Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers], ''Mechatronics'' 23, 713-726. [https://www.academia.edu/4067796/Life-Cycle_Economic_Analysis_of_Distributed_Manufacturing_with_Open-Source_3-D_Printers open access]
* Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) [https://www.appropedia.org/Open-Source_3D-Printable_Optics_Equipment Open-Source 3D-Printable Optics Equipment]. ''PLoS ONE'' 8(3): e59840. doi:10.1371/journal.pone.0059840 [http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0059840 @ PLoS One] [https://www.academia.edu/3129412/Open-Source_3D-Printable_Optics_Equipment open access]
+
* Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) [[Open-Source_3D-Printable_Optics_Equipment|Open-Source 3D-Printable Optics Equipment]]. ''PLoS ONE'' 8(3): e59840. doi:10.1371/journal.pone.0059840 [http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0059840 @ PLoS One] [https://www.academia.edu/3129412/Open-Source_3D-Printable_Optics_Equipment open access]
 
* Anzalone GC, Glover AG, Pearce JM. [http://www.mdpi.com/1424-8220/13/4/5338 Open-Source Colorimeter]. ''Sensors''. 2013; 13(4):5338-5346. doi:10.3390/s130405338 [https://www.academia.edu/3333921/Open-Source_Colorimeter open access]
 
* Anzalone GC, Glover AG, Pearce JM. [http://www.mdpi.com/1424-8220/13/4/5338 Open-Source Colorimeter]. ''Sensors''. 2013; 13(4):5338-5346. doi:10.3390/s130405338 [https://www.academia.edu/3333921/Open-Source_Colorimeter open access]
 
* Joshua M. Pearce, [https://dx.doi.org/10.1016/j.nantod.2013.04.001 Open-source nanotechnology: Solutions to a modern intellectual property tragedy], ''Nano Today'', Volume 8, Issue 4, August 2013, Pages 339–341. [https://www.academia.edu/4394268/Open-Source_Nanotechnology_Solutions_to_a_Modern_Intellectual_Property_Tragedy open access]
 
* Joshua M. Pearce, [https://dx.doi.org/10.1016/j.nantod.2013.04.001 Open-source nanotechnology: Solutions to a modern intellectual property tragedy], ''Nano Today'', Volume 8, Issue 4, August 2013, Pages 339–341. [https://www.academia.edu/4394268/Open-Source_Nanotechnology_Solutions_to_a_Modern_Intellectual_Property_Tragedy open access]

Latest revision as of 14:04, 1 December 2020


Sunhusky.png Michigan Tech's Open Sustainability Technology Lab.

Wanted: Students to make a distributed future with solar-powered open-source 3-D printing and recycling.
Contact Dr. Joshua Pearce - Apply here

MOST: Projects & Publications, Methods, Lit. reviews, People, Sponsors, News
Updates: Twitter, Instagram, YouTube

Create-Joshua-Pearce.png


Pearce Publications: Energy Conservation Energy Policy Industrial SymbiosisLife Cycle Analysis Materials Science Open Source Photovoltaic Systems Solar CellsSustainable Development Sustainability Education


Mhi.jpg
OSL.jpg

Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs by Joshua M. Pearce[edit | edit source]

2014