Difference between revisions of "Category:MOST completed projects and publications"
Jump to navigation
Jump to search
(previous page) (next page)
m |
|||
| (13 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
File:3dmagcoil.png|link=[[3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane]]|[[3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane]] | File:3dmagcoil.png|link=[[3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane]]|[[3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane]] | ||
File:scp.png|link=[[Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios]]|[[Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios]] | File:scp.png|link=[[Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios]]|[[Potential of microbial protein from hydrogen for preventing mass starvation in catastrophic scenarios]] | ||
| + | File:Graphabsvos.png|link=[[A review of the value of solar methodology with a case study of the U.S. VOS]]|[[A review of the value of solar methodology with a case study of the U.S. VOS]] | ||
| + | File:RabbitsFenced5.jpg|link=[[Conceptual Design and Rationale for a New Agrivoltaics Concept: Pastured-Raised Rabbits and Solar Farming]]|[[Conceptual Design and Rationale for a New Agrivoltaics Concept: Pastured-Raised Rabbits and Solar Farming]] | ||
| + | File:Stst_framework.png|link=[[Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration]]|[[Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration]] | ||
| + | |||
File:11697-vol3.cover.jpg|link=[https://www.worldscientific.com/worldscibooks/10.1142/11697-vol3 Optoelectronic Properties: Carrier Transport, Recombination, and Stability]|[https://www.worldscientific.com/worldscibooks/10.1142/11697-vol3 Optoelectronic Properties: Carrier Transport, Recombination, and Stability] | File:11697-vol3.cover.jpg|link=[https://www.worldscientific.com/worldscibooks/10.1142/11697-vol3 Optoelectronic Properties: Carrier Transport, Recombination, and Stability]|[https://www.worldscientific.com/worldscibooks/10.1142/11697-vol3 Optoelectronic Properties: Carrier Transport, Recombination, and Stability] | ||
| + | File:Tio2rod-sphere.jpg|link=[[Reaction Induced Multifunctional TiO2 Rod/Spherical Nanostructured Materials for Screen Printed Dye Sensitized Solar Cells]]|[[Reaction Induced Multifunctional TiO2 Rod/Spherical Nanostructured Materials for Screen Printed Dye Sensitized Solar Cells]] | ||
| + | File:Pv-ev-walmart.jpg|link=[[Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings]]|[[Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings]] | ||
| + | |||
| + | File:nowpower.jpg|link=|[https://www.lesswrong.com/posts/qkvk22oc3YeEJpEfC/cost-effectiveness-of-agi-safety-versus-preparation-for-loss Cost Effectiveness of AGI Safety Versus Preparation for Loss of Electricity/Industry] | ||
| + | File:ALLFED-Loho-Green-Featured-Image.jpg|link=[https://osf.io/jns2e Rapid Repurposing of Biorefinery, Pulp & Paper and Breweries for Lignocellulosic Sugar Production in Global Food Shortages]|[https://osf.io/jns2e Rapid Repurposing of Biorefinery, Pulp & Paper and Breweries for Lignocellulosic Sugar Production in Global Food Shortages] | ||
| + | File:Methaneregvs24.png|link=[https://osf.io/94mkg/ Methane Single Cell Protein: securing protein supply during global food catastrophes]|[https://osf.io/94mkg/ Methane Single Cell Protein: securing protein supply during global food catastrophes] | ||
| + | File:Osdiam.png|link=[https://arxiv.org/ftp/arxiv/papers/2012/2012.00191.pdf Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines]|[https://arxiv.org/ftp/arxiv/papers/2012/2012.00191.pdf Open Source 3-D Filament Diameter Sensor for Recycling, Winding and Additive Manufacturing Machines ] | ||
| + | </gallery> | ||
| + | |||
| + | == 2021 Popular Audience Articles == | ||
| + | <gallery mode=nolines widths=200> | ||
| + | File:Chips2forrecycling.jpg|[https://theconversation.com/how-to-turn-plastic-waste-in-your-recycle-bin-into-profit-147081 How to turn plastic waste in your recycle bin into profit] | ||
</gallery> | </gallery> | ||
== 2020 Completed Projects & Publications == | == 2020 Completed Projects & Publications == | ||
<gallery mode=nolines widths=200> | <gallery mode=nolines widths=200> | ||
| + | File:createsharesave.jpg|link=[[Create, Share, and Save Money Using Open-Source Projects]]|[[Create, Share, and Save Money Using Open-Source Projects]] | ||
File:Fff-poc.png|link=[[Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics]]|[[Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics]] | File:Fff-poc.png|link=[[Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics]]|[[Polymer-derived SiOC Replica of Material Extrusion-based 3-D Printed Plastics]] | ||
File:Grid-defect-biz.png|link=[[The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems]]|[[The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems]] | File:Grid-defect-biz.png|link=[[The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems]]|[[The Potential for Grid Defection of Small and Medium Sized Enterprises Using Solar Photovoltaic, Battery and Generator Hybrid Systems]] | ||
| Line 51: | Line 68: | ||
File:Fpv-asi.jpg|link=[[Distributed manufacturing of after market flexible floating photovoltaic modules]]|[[Distributed manufacturing of after market flexible floating photovoltaic modules]] | File:Fpv-asi.jpg|link=[[Distributed manufacturing of after market flexible floating photovoltaic modules]]|[[Distributed manufacturing of after market flexible floating photovoltaic modules]] | ||
File:Smallfgf.jpg|link=[[Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers]]|[[Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers]] | File:Smallfgf.jpg|link=[[Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers]]|[[Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers]] | ||
| − | |||
File:Sheep-pv.jpg|link=[[A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics]]|[[A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics ]] | File:Sheep-pv.jpg|link=[[A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics]]|[[A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics ]] | ||
| − | |||
| − | |||
File:fpv-water.png|link=[[Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics]]|[[Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics]] | File:fpv-water.png|link=[[Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics]]|[[Water Conservation Potential of Self-Funded Foam-Based Flexible Surface-Mounted Floatovoltaics]] | ||
| − | + | File:Graph abs ed2.png|link=[[The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids ]]|[[The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids ]] | |
| − | File: | + | File:Snowpv-imageanal.jpg|link=[[Image Analysis Method for Quantifying Snow Losses on PV Systems]]|[[Image Analysis Method for Quantifying Snow Losses on PV Systems]] |
| − | File: | ||
| − | |||
</gallery> | </gallery> | ||
| Line 81: | Line 93: | ||
File:Internet-archive-download-free-ebook-audio-music-images.jpg|[https://upjourney.com/best-sites-to-read-online-or-download-free-books-legally 29 Best Sites to Read Online or Download Free Books (Legally) in 2020] | File:Internet-archive-download-free-ebook-audio-music-images.jpg|[https://upjourney.com/best-sites-to-read-online-or-download-free-books-legally 29 Best Sites to Read Online or Download Free Books (Legally) in 2020] | ||
File:Influence.jpg|[https://opensource.com/article/20/10/influence-open-source How to influence people to join open source] | File:Influence.jpg|[https://opensource.com/article/20/10/influence-open-source How to influence people to join open source] | ||
| + | File:Propvsos.png|[https://journalopenhw.medium.com/open-hardware-is-economically-efficient-and-generates-a-massive-return-on-public-investment-34c1b8e73913 Open hardware is economically efficient and generates a massive return on public investment] | ||
| + | File:Open-linux-cn.png|[https://linux.cn/article-12926-1.html 如何感召人们让其参与到开源活动中 ] | ||
</gallery> | </gallery> | ||
Latest revision as of 11:35, 16 January 2021
|
Michigan Tech's Open Sustainability Technology Lab.
Wanted: Students to make a distributed future with solar-powered open-source 3-D printing and recycling. |
|
Pearce Publications: Energy Conservation • Energy Policy • Industrial Symbiosis • Life Cycle Analysis • Materials Science • Open Source • Photovoltaic Systems • Solar Cells • Sustainable Development • Sustainability Education
This category lists completed projects for the Category:MOST. Following the individual links leads to a summary of the project and key findings, related literature reviews, methods, protocols, and equipment, and an open access version of the paper published in a peer reviewed journal.
2021 Completed Projects & Publications[edit | edit source]
2021 Popular Audience Articles[edit | edit source]
2020 Completed Projects & Publications[edit | edit source]
2020 Popular Audience Articles[edit | edit source]
2019 Completed Projects & Publications[edit | edit source]
2019 Popular Audience Articles[edit | edit source]
2018 Completed Projects & Publications[edit | edit source]
2018 Popular Audience Articles[edit | edit source]
2017 Completed Projects & Publications[edit | edit source]
2017 Popular Audience Articles[edit | edit source]
2016 Completed Projects and Publications[edit | edit source]
2016 Popular Audience Articles[edit | edit source]
2015 Completed Projects and Publications[edit | edit source]
2015 Popular Audience Articles[edit | edit source]
2014 Completed Projects and Publications[edit | edit source]
2013 Completed Projects and Publications[edit | edit source]
2011-2012 Completed Projects and Publications[edit | edit source]
Subcategories
This category has only the following subcategory.
O
Pages in category "MOST completed projects and publications"
The following 200 pages are in this category, out of 306 total.
(previous page) (next page)3
- 3-D printable categorized
- 3-D printable open source dual axis gimbal system for optoelectronic measurements
- 3-D printable photovoltaic module spacer
- 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
- 3-D printed magnetic soft magnetic helical coil actuators of iron oxide embedded polydimethylsiloxane
- 3-D printing open-source click-MUAC bands for identification of malnutrition
- 3-D Printing Solar Photovoltaic Racking in Developing World
- 3D printable OSAT gallery 1
- 3D printable OSAT gallery 2
- 3D printable OSAT gallery 3
A
- A Case for Weakening Patent Rights
- A First Investigation of Agriculture Sector Perspectives on the Opportunities and Barriers for Agrivoltaics
- A National Pragmatic Safety Limit for Nuclear Weapon Quantities
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices
- A new method to determine the effects of hydrodynamic surface coatings on the snow shedding effectiveness of solar photovoltaic modules
- A new model for enabling innovation in appropriate technology for sustainable development
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages
- A review of open source ventilators for COVID-19 and future pandemics
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States
- A review of the value of solar methodology with a case study of the U.S. VOS
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development
- Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
- Advances in plasmonic light trapping in thin-film solar photovoltaic devices
- Agrivoltaic potential on grape farms in India
- Aligning executive incentives with global public health goals
- Template:Alt-food
- Alternative Foods as a Solution to Global Food Supply Catastrophes
- Ambiance-dependent Agglomeration and Surface-enhanced Raman Spectroscopy Response of Self-assembled Silver Nano-particles for Plasmonic Photovoltaic Devices
- Amorphous silicon PVT
- Analytical Model for the Optical Functions of Indium Gallium Nitride with Application to Thin Film Solar Photovoltaic Cells
- Anisotropic mechanical property variance between ASTM D638-14 type I and type IV fused filament fabricated specimens
- Antibacterial and anticancer activity of hydrothermally-synthesized zinc oxide nanomaterials using natural extracts of neem, pepper and turmeric as solvent media
- Applications of Open Source 3-D Printing on Small Farms
- Applications of Open Source GMAW-Based Metal 3-D Printing
- Applying a Relationally and Socially Embedded Decision Framework to Solar Photovoltaic Adoption: A Conceptual Exploration
- Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations
- Aquavoltaics: Synergies for dual use of water area for solar photovoltaic electricity generation and aquaculture
- Atomic layer deposited aluminium oxide mitigates outgassing from fused filament fabrication–based 3-D printed components
- Automated quantification of solar photovoltaic potential in cities
B
- Barriers to Appropriate Technology Growth in Sustainable Development
- Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components
- Bridging the Social and Environmental Dimensions of Global Sustainability in STEM Education with Additive Manufacturing
- Building Open Source Hardware in Academia
- Building research equipment with free, open-source hardware
C
- Characteristics of self-assembled ultrathin Nafion films
- Chemical Compatibility of Fused Filament Fabrication-based 3-D Printed Components with Solutions Commonly Used in Semiconductor Wet Processing
- Chemical Synthesis and Characterization of Nano Alumina, Nano Composite of Carbon–Alumina and Their Comparative Studies
- Coal with Carbon Capture and Sequestration is not as Land Use Efficient as Solar Photovoltaic Technology for Climate Neutral Electricity Production
- Compatibility of 3-D printed devices in cleanroom environments for semiconductor processing
- Conceptual Design and Rationale for a New Agrivoltaics Concept: Pasture-Raised Rabbits and Solar Farming
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells
- Conversion of Self-Contained Breathing Apparatus Mask to Open Source Powered Air-Purifying Particulate Respirator for Fire Fighter COVID-19 Response
- Corn sheller
- Cost-effectiveness of interventions for alternate food in the United States to address agricultural catastrophes
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally
- Could 79 People Solarize the U.S. Electric Grid?
- Código abierto Impresora 3-D para Metales
D
- Decarbonizing the boardroom? Aligning electric utility executive compensation with climate change incentives
- Decentralized Renewable Hybrid Mini-Grids for Rural Communities: Culmination of the IREP Framework and Scale up to Urban Communities
- Decreasing turbidity to optimize solar water disinfection
- Defense for Covert Administrative Techniques for Neutralizing American Highly Qualified Personnel
- Democratising design in scientific innovation: application of an open value network to open source hardware design
- Demonstration of a simple encapsulation technique for prototype silicon solar cells
- Design and implementation of mobile educational games
- Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions
- Design of Post-Consumer Modification of Standard Solar Modules to Form Large-Area Building-Integrated Photovoltaic Roof Slates
- Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer
- Development of a Resilient 3-D Printer for Humanitarian Crisis Response
- Differences in Snow Shedding in Photovoltaic Systems with Framed and Frameless Modules
- Distributed manufacturing of after market flexible floating photovoltaic modules
- Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems
- Distributed recycling of post-consumer plastic waste in rural areas
- Dual morphology titanium dioxide for dye sensitized solar cells
E
- Economic Advantages of Dry-Etched Black Silicon in Passivated Emitter Rear Cell (PERC) Photovoltaic Manufacturing
- Economic impact of substituting solar photovoltaic electric production for tobacco farming
- Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.
- Economic Savings for Scientific Free and Open Source Technology: A Review
- Economic viability of captive off-grid solar photovoltaic and diesel hybrid energy systems for the Nigerian private sector
- Educational Pathways to Remote Employment in Isolated Communities
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films
- Effect of microwave power irradiation on TiO2 nano-structures and binder free paste screen printed dye sensitized solar cells
- Effects of silver catalyst concentration in metal assisted chemical etching of silicon
- Effects of spectral albedo on solar photovoltaic devices
- Electric Vehicle Charging Potential from Retail Parking Lot Solar Photovoltaic Awnings
- Emergence of Home Manufacturing in the Developed World: Return on Investment for Open-Source 3-D Printers
- Emerging Business Models for Open Source Hardware
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems
- Energy Conservation with Open Source Ad Blockers
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System
- Energy Policy for Energy Sovereignty: Can policy tools enhance energy sovereignty?
- Enhancement of hydrogenated amorphous silicon solar cells with front-surface hexagonal plasmonic arrays from nanoscale lithography
- Environmental impacts of distributed manufacturing from 3-D printing of polymer components and products
- Environmental life cycle analysis of distributed 3-D printing and conventional manufacturing of polymer products
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM
- Examining interconnection and net metering policy for distributed generation in the United States
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics
- Expanded microchannel heat exchanger
- Expanded microchannel heat exchanger: Non-destructive evaluation
- Expanding the Consumer Bill of Rights for material ingredients
- Experimental Characterization of Heat Transfer in an Additively Manufactured Polymer Heat Exchanger
F
- Fabricating Ordered 2-D Nano-Structured Arrays Using Nanosphere Lithography
- Factors effecting real-time optical monitoring of fused filament 3D printing
- Feeding Everyone if Industry is Disabled
- Feeding Everyone if the Sun is Obscured and Industry is Disabled
- Feeding Everyone No Matter What
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun
- Finite Difference Heat Exchanger Model: Flow Maldistribution with Thermal Coupling
- FitWorld board game
- Food without sun: Price and life-saving potential
- Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD
- Free and open-source automated 3-D microscope
- Free and Open-source Control Software for 3-D Motion and Processing
- From Open Access to Open Science: The Path From Scientific Reality to Open Scientific Communication
- Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
G
H
I
- Image Analysis Method for Quantifying Snow Losses on PV Systems
- Impact of DIY Home Manufacturing with 3D Printing on the Toy and Game Market
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical/Manufacturing Program
- Improved model and experimental validation of deformation in fused filament fabrication of polylactic acid
- Improving recyclebot concepts
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing
- Industrial symbiosis in photovoltaic manufacturing
- Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices
- Inhibition of growth of S. epidermidis by hydrothermally synthesized ZnO nanoplates
- Innovation through collaboration: scaling up solutions for sustainable development
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply
- It Is Time to Move Research Expenditures to the Denominator in University Metrics
L
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems
- Life cycle analysis of distributed polymer recycling
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament
- Life cycle analysis of silane recycling in amorphous silicon-based solar photovoltaic manufacturing
- Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers
- Limitations of nuclear power as a sustainable energy source
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices
- Limiting liability with positioning to minimize negative health effects of cellular phone towers
- Low-cost open source ultrasound-sensing based navigational support for visually impaired
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing
M
- MACE nano-texture process applicable for both single- and multi-crystalline diamond-wire sawn Si solar cells
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto
- Maximizing Returns for Public Funding of Medical Research with Open-source Hardware
- Mechanical Properties and Applications of Recycled Polycarbonate Particle Material Extrusion-Based Additive Manufacturing
- Mechanical properties of 3-D printed truss-like lattice biopolymer non-stochastic structures for sandwich panels with natural fibre composite skins
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions
- Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
- Mechanical Properties of Ultraviolet-Assisted Paste Extrusion and Postextrusion Ultraviolet-Curing of Three-Dimensional Printed Biocomposites
- Micro-Raman Scattering of Nanoscale Silicon in Amorphous and Porous Silicon
- Micromorphology analysis of sputtered indium tin oxide fabricated with variable ambient combinations
- Micronutrient Availability in Alternative Foods During Agricultural Catastrophes
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities
- Modular Design for Spherical Microphone Arrays
- MOST News
- MOST News Coverage 2015
- MOST News Coverage 2016
- MOST News Coverage 2017
- MOST News Coverage 2018
- MOST News Coverage 2019
- MOST News Coverage 2020
- Template:MOST-recycle
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation
O
- Open solar photovoltaic systems optimization
- Open Source 3-D Printed Nutating Mixer
- Open Source 3-D Printers: An Appropriate Technology for Developing Communities
- Open source 3-D printing of OSAT
- Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities
- Open Source Arc Analyzer: Multi-Sensor Monitoring of Wire Arc Additive Manufacturing
- Open Source Completely 3-D Printable Centrifuge
- Open Source Computer Vision-based Layer-wise 3D Printing Analysis
- Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain
- Open Source Digitally Replicable Lab-Grade Scales
- Open Source High-Temperature Reprap for 3-D Printing Heat-Sterilizable PPE and Other Applications
- Open Source Laboratory Sample Rotator Mixer and Shaker
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds
- Open Source Low-Cost Power Monitoring System
- Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing
- Open source nanotechnology
- Open source research in sustainability
- Open Source Waste Plastic Granulator
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem
- Open-source 3-D Printing in Managing Humanitarian Innovation
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom
- Open-source 3D-printable optics equipment