Difference between revisions of "Building insulation energy control module"

From Appropedia
Jump to navigation Jump to search
(Created page with '=Introduction= With the efficiency gains that are possible in the boiler and chiller areas, it is important to ensure that the climate control energy expended is not wasted. Com…')
 
(4 intermediate revisions by one other user not shown)
Line 1: Line 1:
=Introduction=
+
{{QASpage}}
 +
==Introduction==
 
With the efficiency gains that are possible in the boiler and chiller areas, it is important to ensure that the climate control energy expended is not wasted.  Common problems include insufficient insulation volume, moisture build-up and improper installation.
 
With the efficiency gains that are possible in the boiler and chiller areas, it is important to ensure that the climate control energy expended is not wasted.  Common problems include insufficient insulation volume, moisture build-up and improper installation.
 +
 +
==General Data==
 +
''General Insulation Information''
 +
*Level of attic insulation (amount, type, R-value) <-
 +
*Insulated area(s) <-
 +
*Rigid insulation (existence, condition, method of securing, water drainage/permeability)
 +
*Attic venting
 +
*Vapour barrier (separate unit, included in batts) <-
 +
*Suspended ceilings (existence, cooling vs. heating costs and loads)
 +
''Wall Structure''
 +
*Wall design (type, size, R-values, access to building drawings)
 +
*Existence of cavities (accessibility)
 +
*Existence of "Fire Stop"
 +
''Building Glazing''
 +
*Glazing (area exposed to sunlight, locations, types, age, R-value, solar heat-gain treatment)
 +
*Existence of storm windows
 +
*Relative air leakage between consecutive panes
 +
*Reflective interior window films (existence)
 +
  
 
[[Category:Projects]]
 
[[Category:Projects]]
 
[[Category:Queens Applied Sustainability Group]]
 
[[Category:Queens Applied Sustainability Group]]
 
[[Category:Energy audit]]
 
[[Category:Energy audit]]
 +
[[Category:Thermal insulation]]

Revision as of 17:32, 20 September 2011

Introduction

With the efficiency gains that are possible in the boiler and chiller areas, it is important to ensure that the climate control energy expended is not wasted. Common problems include insufficient insulation volume, moisture build-up and improper installation.

General Data

General Insulation Information

  • Level of attic insulation (amount, type, R-value) <-
  • Insulated area(s) <-
  • Rigid insulation (existence, condition, method of securing, water drainage/permeability)
  • Attic venting
  • Vapour barrier (separate unit, included in batts) <-
  • Suspended ceilings (existence, cooling vs. heating costs and loads)

Wall Structure

  • Wall design (type, size, R-values, access to building drawings)
  • Existence of cavities (accessibility)
  • Existence of "Fire Stop"

Building Glazing

  • Glazing (area exposed to sunlight, locations, types, age, R-value, solar heat-gain treatment)
  • Existence of storm windows
  • Relative air leakage between consecutive panes
  • Reflective interior window films (existence)