Line 56: Line 56:
  |header2=Description
  |header2=Description


  |File:imagename | Prototyping for function |1: Prototyping for function|For our first prototype we decided to figure out a way to make a pedal system that would be able to be placed underneath the desk. We found our first donor bike at a local scrap yard in arcata. I took it home for a grand total of $5. The bike was already stripped down but the pedals and frame were intact. When it came to the design of this first prototype, we didn’t have anything in particular in mind. We were just going to use ideas we found on the internet and try to modify them to suit our needs. As soon as we made the first cut on the donor bike, we realized that we could have made a different cut that would have been significantly better, but it was too late to go back. In the end, we were able to scrap it together.  
  |File:EWM_building_bluebikeprototype | Prototyping for function |1: Prototyping for function|For our first prototype we decided to figure out a way to make a pedal system that would be able to be placed underneath the desk. We found our first donor bike at a local scrap yard in arcata. I took it home for a grand total of $5. The bike was already stripped down but the pedals and frame were intact. When it came to the design of this first prototype, we didn’t have anything in particular in mind. We were just going to use ideas we found on the internet and try to modify them to suit our needs. As soon as we made the first cut on the donor bike, we realized that we could have made a different cut that would have been significantly better, but it was too late to go back. In the end, we were able to scrap it together.  


  |File:EWM_building_greenbikeprototype.JPG  | Prototype for desire |2: Prototyping for desire|The second pedal prototype was created using a $3 craigslist bike. We cut more strategically this time. This gave us a much stronger frame to work with. Then we took apart the bike to get down to the bearings. We packed them full of grease to allow for a smoother and quieter ride. We used copper brackets to secure the front part of the pedals to the 2x4, and we cut small grooves into a strip of cedar that was used as the back support.  
  |File:EWM_building_greenbikeprototype.JPG  | Prototype for desire |2: Prototyping for desire|The second pedal prototype was created using a $3 craigslist bike. We cut more strategically this time. This gave us a much stronger frame to work with. Then we took apart the bike to get down to the bearings. We packed them full of grease to allow for a smoother and quieter ride. We used copper brackets to secure the front part of the pedals to the 2x4, and we cut small grooves into a strip of cedar that was used as the back support.  

Revision as of 22:23, 7 May 2019

Template:ENGR215inprogress

Abstract

The purpose of this ENGR 215 project is to build a desk with an attached pedal and fidget toys on top of the desk for students at Zane Middle School. Since middle school students have tons of energy and sit in a classroom most of the day, pedaling while working on assignments allows them to quietly get their jitters out will getting work done.

Background

Catherine L. Zane Middle School is located in Eureka, Northern California. This 6th-8th grade school focuses their curriculum on STEAM (Science, Technology, Engineering, Art, and Math). Education With Movement’s goal was to create a resource for students to utilize during instruction that allows them to fidget quietly.

Problem statement and criteria

Team EWM’s objective is to construct a desk that allows students to remain focused and on-task during class instruction while also safely fidgeting quietly by having access to a bike pedaling system under their desk.

Table 1: Criteria for Final Design

Criteria Description Weight
Safety Moveable components should be shielded, table should have a sturdy base. 10
Durability Design will be used daily, so it must be sturdy and not break. 9
Sound Level Must be as quiet as keyboard typing. 7
Child Size Design should be adjustable to account for all students' sizes. 6
Transportability Must be able to move around with ease. 5
Movement Must provide students with adequate movement to allow quiet fidgeting. 5
Cost A maximum budget of $400, but preferably less than $100. 4


Description of final project

Our final design features an adjustable table with a pedal system. The desk has two main legs with parallel runner boards on the bottom, giving the desk a strong base. It has five preset heights that utilize four nuts and bolts, to hold its position. The pedal system is a recycled bike frame and pedals secured to two boards acting as a base. The table top was created with a piece of plywood on the bottom for strength, then a dry erase board was put on top of that. A ¼" piece of trims runs along the perimeter to keep things from rolling off.

Prototyping

Use a gallery of prototyping photos and lessons learned.

File:EWM_building_bluebikeprototype
Prototyping

Costs

Material and construction costs include any material or labor cost that became a part of our overall total cost of the project. We were lucky enough to be able to use all the tools needed for construction for free which significantly lowered the total cost and allowed us to remain under our budget of $325.

Table 2: Item and Construction Costs

Items Quantity Cost
2x4 wood 4 $12.69
Box of screws 1 $6.49
Washers 4 $0.92
Bolts 4 $6.00
Nuts 4 $0.92
Drill Bit 1 $7.04
Blue Bicycle 1 $5.00
Green Bicycle 1 $3.00
Plywood 1 donated
Tools 1 donated
TOTAL $36.06

Costs (Hours)

Figure 4 illustrates a graphical representation of the total design costs in terms of hours for the design.


Testing Results

One adjustable bike pedal desk was made to help students get their wiggles out without disrupting other students. Also, being able to work on class work in Paige Boone’s classroom. The desk and bike pedals have given the students a resource to accomplish staying on task during class time while simultaneously moving their legs on bike pedals.

How to build

The following two tables are step-by-step instructions on how to build an adjustable desk and pedal system.

File:Default.png
Table Instructions
File:Default.png
Bike Instructions

Maintenance

Maintenance is not the most important thing in order to keep the pedal desk looking pleasant and functioning properly. Very little regular maintenance should be required for the desk due to the mount of use.

Schedule

Maintenance on the bike pedal desk does not follow an exact schedule. If so, a daily task would simply be to wipe the desk top off at the end of the day when normal maintenance crew cleans the classroom. However, if something where to come apart the easiest fix would be to insert a new screw in the same location or near the same screw. As for the pedal the only maintenance it will need is when it starts to make any squeaking noises. The best way to resolve this problem is to apply WD-40 in the grease hole near the pedals.  
Daily
  • Wipe down the desk top to disinfect any bacteria and to take off any marks that previous students made.
Long Term
  • Check the pedals to see if it needs oil if so apply the oil in-between the pedals in the oil hole that’s included.


Troubleshooting

The following table is a guide that details some common problems found with pedal desk users and solutions to each problem.

Problem Solution
Desk gets marked up Wipe/scrub surface
Pedal begins to make high pitched noises Apply WD-40 to squeaking area
Whiteboard starts to come off Add super glue

Discussion and next steps

Team EWM worked collectively to accomplish the construction of the bike pedal desk system. Through the process our team members have gained skills working as a group, communicating with a client, time management, being accommodating, and stepping outside of our comfort zones.

Suggestions for future changes

  • Instead of using wood, use metal pipe and weld it to the bike frame for a stronger joint.
  • Manufactured pedal systems cans be found inexpensively on the internet.
  • Try to make the best cuts when cutting the bike frame.

References

See Help:Footnotes for more. Template:Reflist

Cookies help us deliver our services. By using our services, you agree to our use of cookies.