Bagsofshelter1.png

Abstract

This page discusses Bags of Shelter, an earthbag shelter designed for World Shelters to use as transitional shelter for people in Haiti affected by the January 2010 Earthquake. A four person design team, Humangineers, designed Bags of Shelter as part of Lonny Grafman's Introduction to Design class at Humboldt State University.

Background

This project was done for our 12-week assignment for Introduction to Design for the Spring 2010 semester. Our client, World Shelters, asked Humangineers to use dirt as a resource in order to provide transitional housing for the people of Haiti. Seven criteria were established by World Shelters and they include: Level of Safety, Use of Local Labor, Durability and Repairability, Ratio of Dirt of the Structure, Cost, Ease of Mass Production and Ecological Impacts.

Problem Statement and Criteria

Problem Analysis Specifications

World Shelters asked that Humangineers use dirt as a resource for designing transitional shelter in Haiti. Haiti has a lot of dirt available, but lacked a way to use it in some meaningful way.

Criteria

Our team met with our client, Kurt Therkelsen, from the organization World Shelters (W.S.) on February 11, 2010 to introduce our semester design project. Kurt explained the requirements for our group’s project on February 25th. He discussed how the project will, ideally, be used as temporary long-term housing in the disaster relief effort in Haiti. A main concern of our client was the use of local labor and resources. Further requirements for the design project discussed by our group are in table 1. In addition each criterion was weighted in a scale from 1-10 based on level of importance, with 10 being the highest and 1 being the lowest.


Table 1. Criteria for Design
Criteria Weight
Level of Safety 10
Durability, Repairability 9
Use of Local Labor 9
Cost 8
Ratio of Dirt 8
Ease of Mass Production 7
Ecological Impacts 4

Considerations

Soil samples from Haiti will be unavailable during this project. As a result, an assumption that Haiti has an abundance of clay will be made while making our designs. Research indicates that Haiti's soil contains red clay (Haiti, 2010).

Description of Final Project

Bags of Shelter is a half-scale model shelter made of earthbags. Before construction, Bags of Shelter requires a trench foundation to provide long-term support. The group Rubblution constructed a rubble trench foundation which was 9 inches deep and 9 inches wide. The dimensions of the model are 6’ by 8’ and can be seen in Figure 5-1. Detailed model size CAD drawings can be seen below.

The Walls

Bags are filled with a mixture of 75% sand and 25% clay, (Figure 6), and are compacted and stacked on top of one another to form the walls of the shelter. Between each layer of bags a strip of four-point fourteen-gauge barbed wire is run along the surface of the bags, to provide support (Figures 7 and 8). Bags of Shelter requires a sloping roof for weather proofing so wall heights vary. Half-scale dimensions of wall heights can be seen in Figure 3. One wall is 2’ high, the opposite side is 4’ high, and the remaining 2 walls are sloping.

The Roof

Figure 9 (photo by: B. Reilly)

The roof of Bags of Shelter is made of polypropylene sheeting. The model size shelter requires 2 sheets cut to scale. Boards that are 1x6 ft are layed across the top most layers of the bags and secured on with wire. Figure 9 shows two holes which are drilled through these boards every four feet. The wire is wrapped through these holes and secured down through the top three layers of bags. Rafters are hung across these boards and the polypropylene sheeting is attached with screws or nails. The CAD drawing depicted above in Figure 3 shows a side view of the roof, which has a two foot slope and a one foot overhang in order to protect the structure from water damage.

The Door and Windows

Bags of Shelter has two windows and one door. One window can be seen in figure 2, and is one foot by one foot. Figure 3 shows the doorway which is combined in the drawing with the second window. The design is such that there is no earthbag load on the top of the window and door frames, therefore less lumber is necessary and the total materials costs are reduced.

The Protective Coating

To prevent the polypropylene bags from degrading a protective coating is required for this structure. This protective coating can be made from many different possibilities including, plaster, papercrete, lime, etc. In addition to the coating it is recommended that two coats of lime wash be painted on as a final coat. In this project the protective coating was not implemented due to the short lifespan of the model structure.

Total Costs

Hours

The design costs indicate the quantity of hours that Humangineers as a team has put into this design project. Humangineers has spent 426.67 hours on this design project. The design hours spent in phase 5 total 310.47 hours. Figure 10 represents the distribution of hours that went into this project.

Materials

Figure 11 indicates the costs of materials used in the construction of Bags of Shelter. The total amount spent to construct the project was $222.47. Because many items were donated, a column for projected costs is included in Table 5-1. The total projected costs for Bags of Shelter is $272.81. Also included in the list of materials is implementation costs, these are estimates of what a full scale structure would cost to be erected in Haiti.

Hourspie.png
Itemized Cost of Materials
Materials Use Quantity Project Cost ($) Projected Project Cost ($)
Polypropylene Bags (15 x27 in.) Building Blocks 225 112.87 112.87
Polypropylene Bags (9 x18 in.) Building Blocks 20 Donation 10.80
18 Gauge Wire Roof Reinforcement 36 ft. Donation 18.99
Sand Fill Material 3.87 tons 86.6 45.00
Clay Fill Material .97 tons Donation 4.75
Polypropylene Sheet Roofing 8.5 x 7 N/A N/A
Thread Sewing Poly Bags 4 rolls 5.00 5.00
20 Gauge Wire Strips Sewing Poly Bags 4 packs 8.00 8.00
4 Point Barbed Wire Intermediate Support 358 ft Donation 21.00
Lumber (1x12) Door, Window Frame 13 ft Donation 4.80
Lumber (1x6) Roof Frame 28 ft 10 10.00
Lumber (2x4) Roof Rafters 21 ft Donation 6.75
Screws Door, Window Frame 16 Donation 1.60
Total 222.47 231.21

Results

Figures 12-15 show Humangineers final stages of construction. Humangineeers successfully built a model size structure of an earthbag house. The use of the earthbags combined with the barbed wire provides a sturdy as well as stable structure.

Discussion and Next Steps

Humangineers recommends Bags of Shelter because it is a suitable design for World Shelters and meets the client criteria. Bags of Shelter uses dirt as a primary building resource. The design also provides a way for Haitians to stimulate their local economy by making barbed wire and also by building the entire structure itself. Overall, Bags of Shelter is a functional design for transitional housing in Haiti. Humangineers recommends the use of lime plaster as an exterior coating for the structure. Humangineers also recommends proper testing to ensure safety of inhabitants using this design for housing. Testing needs to include both hurricane and earthquake resistance. If this design were to be implemented, Humangineers suggests eventually replacing the polypropylene roofing with something that will provide long-term needs, such as metal roofing.

References

“Haiti”. History.com. 5 May 2010. http://www.history.com/topics/haiti

World Shelters, 2009. “Involvement.” < http://worldshelters.org/home> (Feb. 27, 2009)

Authors

Cookies help us deliver our services. By using our services, you agree to our use of cookies.