We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "User:Zsarnold"

From Appropedia
Jump to navigation Jump to search
Line 98: Line 98:
  
 
'''3D Printed Drone:'''
 
'''3D Printed Drone:'''
     Over the winter break 2018, I built the drone released on the Prusa website. [https://www.thingiverse.com/thing:724999 MPCNC Files]
+
     Over the winter break 2018, I built the drone released on the Prusa website. [https://www.thingiverse.com/thing:3249126 Drone Files]
 
{{Gallery
 
{{Gallery
 
|title=3D Printed Drone Christmas 2018
 
|title=3D Printed Drone Christmas 2018

Revision as of 22:43, 4 January 2019

Zsarnold headshot.jpg

Zach Arnold

Email: zsarnold@mtu.edu

https://www.thingiverse.com/zarnold16/about

About Me

Hello, I am Zach Arnold. I am currently pursuing a double major in electrical and computer engineering. I love working with circuits and messing around with my 3D printers.

Interests

Electronics Open Source 3D Printers PLC IOT Drones
Robotics Automation VLSI Arduino CNC Circuit Design

Experience

  • I have built 4 separate 3D printers from a kit. Two deltas, cloner(MakerBot clone), and a Prusa i3 clone.
  • I built an MPCNC

Enterprise

Semester 1 Fall 2017


GM Robot Arm Automation:

    This semester Dan and I worked on a project to automate a 3D printer. The main aspect of the automation is an open source robotic arm called Dexter. After 2.5 months, we were able to complete the mechanical part of the arm after jumping many obstacles. We did not receive the electronics until a much later date. Upon obtaining the package of the electronics, we noticed that more parts were missing which is going to set back our timeline once again. Another part of the project is the safety cage that Dan designed. The cage is going to be the main showcase for the automation system where the robotic arm and the printer can work without the risk of injury. The last aspect of the project that I worked on was increasing the ease of removal of prints from the print bed. I designed in CAD and started to print a fan cooling system that, in theory, should speed cool the print bed of the Prusa i3 Mk2 allowing the part to pop off. Our plans for next semester(Spring 2018) is to get the arm moving and programmed, start wiring up the cage with lights and a display system and, lastly, to get prints off the bed easier. All of this should lead to a working demo for design expo.

Semester 2 Spring 2018


GM Robot Arm Automation:

   This semester Dan, Erica and I worked on the next part of the automation of a 3D printer. I was tasked with learning how to program the arm, wiring the arm, getting Octoprint on a raspberry pi, and creating an Arduino circuit to have the RGB LEDs working on the cage. The RGB circuit was created with old MOSFETs from broken Ramps boards and some pulldown resistors. The board will then connect to the digital pins 9,10,11 on an Arduino mega. Whenever the button is pressed, it cycles between the 6 presets: random red, random green, random blue, strobing random RGB, white and lastly purple. After a couple of long zoom conferences with Haddington Dynamics, we were able to get Dexter moving and completely wired. The wiring was a long task since we had to make sure that the wires did not get strained or pulled within all of Dexter's degrees of freedom. The bulk of the programming was fairly simple with just the angles being changed. The goal for next semester (Fall 2018) is to figure out external feedback from the printer to the robot, add some sort of force sensing with the end effector, and lastly start to allow any size prints. These plans should be a good step in the correct direction to get a fully autonomous 3D printing system. Images - https://imgur.com/a/42GDrtg Video - https://drive.google.com/a/mtu.edu/file/d/134raRGVk7CO-c5Ff2POeP2raITlLMOgD

Semester 3 Fall 2018


Lasersaur:

   This semester I worked to get the Lasersaur back in working order. I had to redesign all of the mirror mounting methods. This proved to be slightly difficult because I had to make it fit the original 3D printed pieces that were designed previously but the files for it could not be found. I had to reverse engineer the dimensions to get mounting points. I also had to do some updating to all of the wiring and firmware. The Lasersaur is using a smoothieboard with smoothieware being the firmware. The firmware was the CNC version of smoothieware with the laser being enabled. I had to change some of the working size dimensions and the steps per mm to get it more dimensionally accurate. I was able to get the mirrors aligned enough to do a test cut. The next steps are to redesign the gantry due to a random binding issue and to wire all of the endstops correctly. I also need to figure out how to properly align the mirrors because when it gets too far from the edges it becomes out of focus.
Lasersaur Fall 2018
Fig 1: Overall lasersaur.  
Fig 2: Lasersaur electronics.  
Fig 3: Second laser mirror.  
Fig 4: Third laser mirror.  
Fig 5: X gantry belt holder.  
Fig 6: First cut with laser intensity test.  
Fig 7: First full cut through a material.  

3D Print Service:

   This semester I continued the enterprise printing service. I printed a few different things for the ME department and Materials department. At the beginning of the semester, I designed a keychain that we can give out at different events. I went through multiple iterations to make it be the most streamlined, print in 30 minutes, and to fit well in a pocket. Keychain Files 
OSHE Keychain
Fig 1: Top of the keychain I designed.  
Fig 2: Bottom of the keychain I designed.  

Miscellaneous:

   This semester I completed a lot of outreach and increased the team size of the enterprise. At the beginning of the semester we only had twelve members and now we have twenty members. This semester I also secured a new computer for use within our lab. 
Lab Computer
Fig 1: The new computer setup in the lab.  

Personal Projects

MPCNC:

   Over the summer of 2018, I built the mostly printed CNC. It was a quick and easy build. MPCNC Files
MPCNC Summer 2018
Fig 1: Overall MPCNC.  
Fig 2: Electronics side of MPCNC.  
Fig 3: Toolhead of the MPCNC.  
Fig 4: First use of CNC, pen tool drawing the MTU logo.  

3D Printed Drone:

   Over the winter break 2018, I built the drone released on the Prusa website. Drone Files
3D Printed Drone Christmas 2018
Fig 1: Parts of the drone.  
Fig 2: Drone completed.