No edit summary
No edit summary
Line 15: Line 15:
|Image:HeavyDutyHandle JEH.jpg|A handle I will attach to the top of my printer for easier carrying. Printed in two pieces, each at 50% fill, and glued together using JBQuickweld and small pieces of filament in holes.
|Image:HeavyDutyHandle JEH.jpg|A handle I will attach to the top of my printer for easier carrying. Printed in two pieces, each at 50% fill, and glued together using JBQuickweld and small pieces of filament in holes.
|Image:Celtic Faceplate On.jpg|Celtic Lightswitch Faceplate [https://www.youmagine.com/designs/celtic-faceplate]
|Image:Celtic Faceplate On.jpg|Celtic Lightswitch Faceplate [https://www.youmagine.com/designs/celtic-faceplate]
|Image:batarangJEH.jpg|Batarang
}}
}}


Line 44: Line 45:
| Fixed
| Fixed
| Not exactly sure what fixed it. Hot end may have been to close to print surface during printing.  Adjusted carriage bolts for height.
| Not exactly sure what fixed it. Hot end may have been to close to print surface during printing.  Adjusted carriage bolts for height.
|-
|11/05/2014
| Unspooling of filament is a hassle. Want independent printing.
| Fixed
| Bought a cheap lazy susan.  Works great.  I could make a custom printed version in the future.
|}
|}


[[category:3D printing]]
[[category:3D printing]]
[[category:777-2014 People]]
[[category:777-2014 People]]

Revision as of 21:44, 10 November 2014

MY4777 Open Source 3D Printing Class Student Profile

4th year Electrical Engineering student at Michigan Tech. This class is my first experience with 3D printing hardware and software. Template:Userboxtop Template:User OSH Template:User 3D printing Template:Userboxbottom

Delta Prints

Print Issues & Modifications Log

Date Issue Status Solution
09/20/2014 Filament won't enter hot end. Gets stuck in the 1/4" wider gap between PFT tube and hot end internal PFT. Rough Fix Inserted 1/4" piece of PFT tube into the gap. Flared opening.
09/20/2014 Filament won't extrude out of hot end Fixed "Heat-to-cool" declogging approach did not work multiple times. Required to heat hot end, push pin into nozzle to push up obstruction, and then cool and extract. This way filament could "grab" obstruction before cooling.
09/25/2014 Repetier Host won't begin print sequence but other controls work fine. Temp feedback freezes. Temporary Work Around Using Pronterface, can consistently read temp and initiate print sequence.
09/25/2014 Filament doesn't extrude during print. Oozes fine when not printing. Fixed Not exactly sure what fixed it. Hot end may have been to close to print surface during printing. Adjusted carriage bolts for height.
11/05/2014 Unspooling of filament is a hassle. Want independent printing. Fixed Bought a cheap lazy susan. Works great. I could make a custom printed version in the future.
Cookies help us deliver our services. By using our services, you agree to our use of cookies.