No edit summary
No edit summary
(10 intermediate revisions by 2 users not shown)
Line 4: Line 4:
{{userboxtop}}
{{userboxtop}}
{{User OSH}}
{{User OSH}}
[[category:MY4777]]
{{User 3D printing}}
{{User 3D printing}}
{{userboxbottom}}
{{userboxbottom}}


[[Image:SteveImage.jpg|thumb|left]]
[[Image:SteveImage.jpg|thumb|left]]
==Printer Build==
[[Image:build_printer.jpg|thumb|center]]
The RepRap printer took approximately 20 cummulative hours to build. After the printer was complete it needed to be calibrated. 
[[Image:printer_finished.jpg|thumb|center]]
Once the printer was complete and calibrated I was able to use softwares such as: cura, Repetier-Host and OpenScad to start developing my own designs to be printed. The project sections are some of the personal designs that I have designed and printed using my printer.
==Projects==
I designed a rock wall hold and the .stl and .scad files can be found at thingiverse (http://www.thingiverse.com/thing:493694).
[[Image:Rockwallmount_sjh.jpg|thumb|left]]
I had a broken shin guard that I wanted to repair. I designed and printed a replacement guard. I believe there is great potential for customized protective equipment that could be captured by the 3D printing technology. Some companies like Nike and Bauer Hockey are starting to use the technology for some of thier new products. (http://libre3d.com/category/556/SportsOutdoors/listings/828/Soccer-Shin-Guards.html)
[[Image:soccer_shin_guard.jpg|thumb|left]]
I was also assigned a project to design an appropriate technology targeting a developing country. I designed and printed shoes. (http://www.appropedia.org/File:Completed_shoe.jpeg)
[[Image:Completed shoe.jpeg|thumb|left]]


[[category:777-2014 People]]
[[category:777-2014 People]]

Revision as of 21:59, 7 March 2015

Introduction

My name is Steven Helminen and I am pursuing a B.S. in mechanical engineering at Michigan Technological University. I built a RepRap 3D printer for a technical elective course. I have an interest in the capabilities of 3D printing and additive manufacturing. Through this project and Appropedia, I am learning a lot about the open source community and the power it has. I hope to continue to be an active member on Appropedia.

Template:Userboxtop Template:User OSH Template:User 3D printing Template:Userboxbottom

SteveImage.jpg











Printer Build

Build printer.jpg

The RepRap printer took approximately 20 cummulative hours to build. After the printer was complete it needed to be calibrated.

Printer finished.jpg

Once the printer was complete and calibrated I was able to use softwares such as: cura, Repetier-Host and OpenScad to start developing my own designs to be printed. The project sections are some of the personal designs that I have designed and printed using my printer.






Projects

I designed a rock wall hold and the .stl and .scad files can be found at thingiverse (http://www.thingiverse.com/thing:493694).

Rockwallmount sjh.jpg










I had a broken shin guard that I wanted to repair. I designed and printed a replacement guard. I believe there is great potential for customized protective equipment that could be captured by the 3D printing technology. Some companies like Nike and Bauer Hockey are starting to use the technology for some of thier new products. (http://libre3d.com/category/556/SportsOutdoors/listings/828/Soccer-Shin-Guards.html)


Soccer shin guard.jpg













I was also assigned a project to design an appropriate technology targeting a developing country. I designed and printed shoes. (http://www.appropedia.org/File:Completed_shoe.jpeg)


Completed shoe.jpeg
Cookies help us deliver our services. By using our services, you agree to our use of cookies.