User:Scdertin: Difference between revisions

Revision as of 16:40, 2 June 2020

Bio

I am a recent graduate in Biomedical Engineering at Michigan Technological University. I was a part of the Pavlis Honors College, both as a learning facilitator and as a student. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other students to work on aiding a small community with local problems (i.e STEM education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I am currently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material to 3D-print medical applications, as well as building an open-source ventilator for COVID-19.

Main Research Projects

Creating Filament from the Windshield Wiper Material to 3D-Print Prosthesis - Prosthetic_Plastic_Literature_Review
Using a Heated Syringe Delta Printer to Print Applications Using Recycled Waste - High-Temperature Syringe printer:MOST
Open Source ventilators - Open source ventilator
Artificial Lung Testing - Artificial lung method MOST

Publications

Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades

Research Projects I've Helped With

Creating a Syringe Printer out of a Lulzbot Mini - Creating Syringe Printer using a Lulzbot Mini
Testing and Using the Lulzbot Bioprinter - Lulzot Bioprinter

Literature Reviews Written

Waterproofing 3D-Prints: Waterproofing_3-D_prints_literature_review

MSE4777 - Open Source 3D Printing Class

Mini Projects

Big Projects

Template:Userboxtop Template:User OSH Template:User 3D printing Template:Userboxbottom

@@ Line 1: / Line 1: @@
-[[File:pc.jpg|thumb|upright=0.75]]I am a fourth year Biomedical Engineer at Michigan Technological University. I am a part of the Pavlis Honors College, both as a peer mentor and as a member. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other members from the college to work on aiding a small community with local problems (i.e STEM education or health education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I am currently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material as filament to 3D-print prosthesis.
+{{777}}
+[[File:meandlung.jpg|thumb|upright=0.75]]
-'''Projects'''
+=='''Bio'''==
+I am a recent graduate in Biomedical Engineering at Michigan Technological University. I was a part of the Pavlis Honors College, both as a learning facilitator and as a student. In the Summer of 2019, I had the opportunity to go abroad to Tanzania with two other students to work on aiding a small community with local problems (i.e STEM education). I was a member of the Innovative Global Solutions Enterprise with the main task of designing, and constructing, the poly-carbonate packaging for a pandemic ventilator. I am currently a member of the Michigan Tech Open Sustainability Technology Lab working on using recyclable material to 3D-print medical applications, as well as building an open-source ventilator for COVID-19.
-''Creating Filament from the Recyclable Material:''
+=='''Main Research Projects'''==
-The recyclable material was run through a device known as the Recyclebot. This device was created by a previous student to allow the use of any material to become filament to use in a 3D-printer. The link below shows the details about the Recyclebot.
+*Creating Filament from the Windshield Wiper Material to 3D-Print Prosthesis - [[Prosthetic_Plastic_Literature_Review]]
-https://www.appropedia.org/Recyclebot_v4.0ac
+*Using a Heated Syringe Delta Printer to Print Applications Using Recycled Waste - [https://www.appropedia.org/High-Temperature_Syringe_Printer:MOST High-Temperature Syringe printer:MOST]
+*Open Source ventilators - [[Open source ventilator]]
+*Artificial Lung Testing - [[Artificial lung method MOST]]
-''Using the Homemade Filament to create Prosthesis:''
+=='''Publications'''==
-The filament is then inserted into the 3D-printer. For this project, the Lulzbot TAZ 6 is being used with a special head called the Lulzbot TAZ Aerostruder Tool Head. This type of head allows for flexible filament to be used in the machine.
+* [https://www.sciencedirect.com/science/article/pii/S0921344920301312?via%3Dihub Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades]
-'''Literature Reviews:'''
+=='''Research Projects I've Helped With'''==
-https://www.appropedia.org/Waterproofing_3-D_prints_literature_review
+*Creating a Syringe Printer out of a Lulzbot Mini - [[Creating Syringe Printer using a Lulzbot Mini]]
+*Testing and Using the Lulzbot Bioprinter - [[Lulzot Bioprinter]]
+=='''Literature Reviews Written'''==
+*''Waterproofing 3D-Prints:'' [[Waterproofing_3-D_prints_literature_review]]
+=='''MSE4777 - Open Source 3D Printing Class'''==
+===Mini Projects===
+{{gallery
+|width=180
+|lines=2
+|Image:Funct3Dprint.jpg | The top view of a functional Athena II Printer
+|Image:Xyz_Calibrationcube.jpg| The failure assignment assigned to learn what a failed print looks like
+|Image:BearRockwall.jpg | Bear Rock Wall Climber using OpenSCAD: https://www.thingiverse.com/thing:3894803
+|Image:CustomizeProject.jpg | A customized and customizable piano book holder using OpenSCAD: https://www.thingiverse.com/thing:3895088
+|Image:ScreenCover_miniproject.jpg | A spider screen cover using FreeCAD: https://www.youmagine.com/designs/spider-light-cover
+|Image:vikingproject.jpg | A viking themed candle holder using Blender: https://www.youmagine.com/designs/viking-inspired-candle-holder
+}}
+===Big Projects===
+{{gallery
+|width=180
+|lines=2
+|Image:CompletedBoard.JPG | Anatomy Bone Puzzle for Educational Aid: https://myminifactory.com/object/3d-print-anatomy-puzzle-103529
+|Image:Monochromator.jpg | Beginning Stages of the Printed Parts for an Automatic Monochromator: https://3dprint.nih.gov/discover/3dpx-012405
+|Image:Monochromator_Final.jpg| Final Automatic Scanning Monochromator: https://www.appropedia.org/Open_Source_Automated_Scanning_Monochromator
+|Image:llamacase.jpg| Llama Phone case for Samsung Galaxy S8: https://www.myminifactory.com/object/3d-print-llama-phone-case-107201
+}}
 [[Category: MOST users]]
+[[Category:777 Users 2019]]
+{{userboxtop}}
+{{User OSH}}
+{{User 3D printing}}
+{{userboxbottom}}