(Created page with " == About Me == ---- Studying materials science and engineering at Michigan Tech. == Research == ---- '''Interests''' -3-D printing technologies -Solar panel materials '''Com...")
 
(42 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:PJMsummer2018.jpg||right|300 px|]]
= About Me =
Currently studying materials science and engineering at Michigan Tech. I became interested in the engineering field and found material science through the Michigan Tech summer youth programs. I furthered my interest by taking  pre-engineering class and joining my high school's FIRST robotics team. I joined the wiring team because I had some experience wiring and knew I didn't want to be a mechanical engineer, where I eventually became the wiring team leader. The pre-engineering course gave me my first opportunity to work on a renewable energy project. I am excited to continue my materials science and engineering career and begin researching new advanced materials.


== About Me ==
= Research =
==Interests==
I have no previous research experience and these are some areas I'd like to start in
====3-D printing technologies====
More accurate printing with a variety of materials including plastic, metal, wood, and photovoltaic
====Photovoltaic materials====
Increased efficiency of electromagnetic absorption with greater range of electromagnetic frequencies
====Piezoelectric materials====
Greater mechanical response to lower strength electric fields
====Renewable energy technologies====
Large wind kites and more efficient solar panels
 
==Current==
===3DP OSCALD===
----
3D printed open sourced atomic layer deposition system
===Floatovoltaics===
----
----
Studying materials science and engineering at Michigan Tech.
Thin photovoltaics with plastic rafts to float on water
 
====Literature Review====
[[Solar floatovoltaics lit review]]


== Research ==
===MSE5777===
----
<gallery caption="Projects" mode=packed heights=150px >
'''Interests'''
Image: PJM_MSE5777_print_failure.jpg |[https://www.thingiverse.com/thing:47405/#files Failed UP Keychain Print]
-3-D printing technologies
Image: PJM MSE5777 Rock hold.JPG |[https://www.thingiverse.com/thing:3907911 Double Ledge Rock Hold ]
-Solar panel materials
Image: Costumizable_Water_trap_scad.jpg |[https://www.thingiverse.com/thing:3907672 Customizable Water Trap With Barbs]
'''Completed Projects'''
Image: PJM_MSE5777_Cloudy_moon_screencover.JPG |[https://www.youmagine.com/designs/cloudy-moon-screencover Cloudy Moon Screen Cover]
Image: PJM_MSE5777_Goat_head_cup_dispernser.JPG |[https://www.youmagine.com/designs/goat-and-celetic-solo-cup-dispenser Goat and Celtic Solo Cup Dispenser]
Image: MSE4777 0-10 ojibwe.JPG | [https://www.myminifactory.com/object/3d-print-ojibwe-number-education-aid-103592 Ojibwe Number Aid] ~$5.50  to print 0 through 10 in PETG
Image:MSE5777 biomimic Coin mold.png| [https://www.thingiverse.com/thing:3964035 Biomimic material mold for 3d modeling new surgical tools]
Image:OSAT_brush_thumbnail.jpg|  OSAT [[Scrub Brush]]
Image:Cat_fountain_3.jpg| [https://www.myminifactory.com/object/3d-print-adjustable-cat-fountain-107438 Adjustable Cat Fountain]
</gallery>
 
==Completed Projects==
===[[Recycled Concentrated Solar Water Heater]]===
 
===[[3DP Tent]]===
 
[[Category:5490-19]]
[[Category:MOST users]]
[[Category:MY4777]]
[[Category:777_Users_2019]]

Revision as of 18:15, 30 March 2020

PJMsummer2018.jpg

About Me

Currently studying materials science and engineering at Michigan Tech. I became interested in the engineering field and found material science through the Michigan Tech summer youth programs. I furthered my interest by taking pre-engineering class and joining my high school's FIRST robotics team. I joined the wiring team because I had some experience wiring and knew I didn't want to be a mechanical engineer, where I eventually became the wiring team leader. The pre-engineering course gave me my first opportunity to work on a renewable energy project. I am excited to continue my materials science and engineering career and begin researching new advanced materials.

Research

Interests

I have no previous research experience and these are some areas I'd like to start in

3-D printing technologies

More accurate printing with a variety of materials including plastic, metal, wood, and photovoltaic

Photovoltaic materials

Increased efficiency of electromagnetic absorption with greater range of electromagnetic frequencies

Piezoelectric materials

Greater mechanical response to lower strength electric fields

Renewable energy technologies

Large wind kites and more efficient solar panels

Current

3DP OSCALD

3D printed open sourced atomic layer deposition system

Floatovoltaics

Thin photovoltaics with plastic rafts to float on water

Literature Review

Solar floatovoltaics lit review

MSE5777

Completed Projects

Recycled Concentrated Solar Water Heater

3DP Tent

Retrieved from "https://www.appropedia.org/w/index.php?title=User:Pierce_Mayville&oldid=405416"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.