Difference between revisions of "User:Klbarie"

From Appropedia
Jump to navigation Jump to search
(Added link to Headphone stand thingiverse page)
(Added elephant image on mobile)
Line 32: Line 32:
|Image:SpoolHolder.jpg|Simple Filament Spool Stand V3.2 by FablabMoebius: http://www.thingiverse.com/thing:296971
|Image:SpoolHolder.jpg|Simple Filament Spool Stand V3.2 by FablabMoebius: http://www.thingiverse.com/thing:296971
|Image:Headphone_Stand.jpg|Kyle's Dual Headphone Stand: http://www.thingiverse.com/thing:1087825
|Image:Headphone_Stand.jpg|Kyle's Dual Headphone Stand: http://www.thingiverse.com/thing:1087825
|Image:elephant.jpg|Elephant found on #Thingiverse http://www.thingiverse.com/thing:257911
|Image:Henker_SeniorDesign_Disc.jpg|Prototype Disc for Justin Henker's Senior Design
|Image:Henker_SeniorDesign_Disc.jpg|Prototype Disc for Justin Henker's Senior Design

Revision as of 17:42, 23 October 2015

537203 10200233780717239 1115786895 n.jpg

Kyle Barie


I am a sixth year student studying Mechanical Engineering with a minor in Manufacturing at Michigan Technological University. I plan to graduate in the Spring of 2016. I am currently enrolled in the Open Source 3D Printing Class where I am learning how to build and manipulate my very own 3D printer as well as learn about the open source community as a whole. I am also involved in the Consumer Product Manufacturing Enterprise where we strive to exceed expectations of company sponsors, improve the lives of consumers through innovation giving us hands-on experience at identifying and solving real-world engineering problems by developing and applying technical, professional and entrepreneurial skills. Working with the Hops Dryer Development Team we aim to create an affordable solution to small scale hops farmers to create more high quality hops for the expanding craft brewing industry.

I have learned that every success and failure can be used as an opportunity to learn and better yourself, which I take advantage of as often as possible. I am always asking questions, and learning everything I can.

Picture gallery

3D Printer Photos
Kyle's MOST Delta  
Kyle's MOST Delta Electronics  
3D Prints
Kyle's Rock Wall Hold  
Simple Filament Spool Stand V3.2 by FablabMoebius: http://www.thingiverse.com/thing:296971  
Kyle's Dual Headphone Stand: http://www.thingiverse.com/thing:1087825  
Elephant found on #Thingiverse http://www.thingiverse.com/thing:257911  
Prototype Disc for Justin Henker's Senior Design  

Personal Projects

1993 Jeep Cherokee XJ

Owning a vehicle that is as old as you has serious drawbacks. Especially when you live in Michigan. This has lead to a series of projects to upkeep and repair my Jeep.

New Floor Boards

Due to the harsh winters and salted roads of Michigan, the Jeep's floorboards were completely rusted out. Over the course of 3 weeks, I removed the interior, and cut out the rusted portions with an angle grinder. I then cut and folded sheet steel to fit into the large holes in my flooring. The replacement flooring was held in place by 1/8" stainless steel pop rivets, and sealed with adhesive caulk. Everything was then coated in a heavy dose of Rust-Oleum paint and Undercoating.

Partial Floorboards removed in floorboard replacement  

Rear Quarter Panel Rust Repair

Pre-Rust Repair  

New U-Joints

Old U-Joints  
Replaced U-Joints  

Front Bumper Repair

Fender Bender Damage  
Repaired Front Bumper  

New Wheel Hub Bearings and Brakes

Front Wheels Removed  
Rear Wheels Removed  
Bending Breaker Bar Trying to Remove Nut  
Broke 1/2" Breaker Bar  
New Vs. Old Wheel Hub Bearing  
Hub Before Cleaning  
Hub After Cleaning  

Supernatural Lamp

Kyle's Supernatural Themed Lamp  
Kyle's Supernatural Themed Lamp Turned On  
Kyle's Supernatural Themed Lamp Detail  

Gaming PC Build

Kyle's Gaming PC in the Dark  
Kyle's Gaming PC  


Oshw-logo.png This user is a member with interest and knowledge of Open Source Hardware.
Reprap.png This user is a member with an interest and knowledge of 3-D printing.
This OSAT has been designed but not yet tested - use at own risk.
This OSAT has been modeled.