Ringbearer: Movable LED ring for 3D print lighting and analysis

Background

We would like to illuminate objects on our 3D printer bed, using an LED light ring. We would like to be able to change the height (Z) of this ring using stepper motors.

Objective

Design 3D printed apparatus to support a LED ring, and allow it to be moved up and down with stepper motors. Apparatus should minimize obstruction with normal operation of the printer.

Solution

Printed Components

Ringbearer consists of several pieces which are individually printed and then assembled. It's difficult to print a 1-piece object this large, so Ringbearer is composed of several component pieces:

Quantity	Image	Name	Description
6		Sectional LED ring pieces	6 of these in total are snapped together to form a plastic support ring, which allows the LED ring to be raised and lowered. The design is parametric, in OpenSCAD, to allow for different sized print beds, rings, etc. The module which draws the female threaded piece can be enabled or disabled, since only 2 of the 6 ring pieces will actually connect to a motor. Elevator rods screw into this piece, so the ring can be raised by the motor.
2		Elevator screw	This screw piece attaches directly to the stepper motor shaft. It threads into the elevator nut/ring holder and facilitates raising/lowering the entire assembly.
2		Motor Mounts	This mount attaches the NEMA17 motor to the side of the Athena printer.

STL / OpenSCAD files

Please find the latest STL, Parametric OpenSCAD files, etc in the NIH Repository.