m (Text replacement - "{{QASpage}}" to "{{QAS notice}}")
 
(45 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{QASpage}}  
{{User data}}
 
{{QAS notice}}  


==Fun Facts About Me==
==Fun Facts About Me==
Line 7: Line 9:


===Blogs and Interesting Articles, Websites ===
===Blogs and Interesting Articles, Websites ===
[http://projects.pelrun.net/ Pelrun's blog] strong programming, Wades stepper motor extruder replacement after RepRap extruder trouble, acceleration problem with z axis, fast reprap, measureing backlash, oiling extruder, using multiply to shift z=x=y=0 location, serial cable tainting, calibrate steps/mm, Rapman to mendel, troubleshooting galour, default zero extrusion speed, how to make acrylic cement, <br />
Pelrun's blog strong programming, Wades stepper motor extruder replacement after RepRap extruder trouble, acceleration problem with z axis, fast reprap, measureing backlash, oiling extruder, using multiply to shift z=x=y=0 location, serial cable tainting, calibrate steps/mm, Rapman to mendel, troubleshooting galour, default zero extrusion speed, how to make acrylic cement, <br />
[http://technocraticanarchist.blogspot.com/ Forrest Higgs blog on RapMan'ed objects] vectorization of pixel images, speed of gcode, diagonal gcode, slice and dice, structural tensioned beams, zein biopolymer, rack and pinion gears, stepper controller board, fixing overhangs, segmented aprons, sanding parts, support, printing large objects, tommelise circuits mechanical and extruder, filament extrusion, extruder design.<br />
[http://technocraticanarchist.blogspot.com/ Forrest Higgs blog on RapMan'ed objects] vectorization of pixel images, speed of gcode, diagonal gcode, slice and dice, structural tensioned beams, zein biopolymer, rack and pinion gears, stepper controller board, fixing overhangs, segmented aprons, sanding parts, support, printing large objects, tommelise circuits mechanical and extruder, filament extrusion, extruder design.<br />
[http://blog.reprap.org/ RepRap blog]<br />
[http://blog.reprap.org/ RepRap blog]<br />
[http://rapmanscotland.blogspot.com/ Pilot RapMan in schools project]<br />
[http://rapmanscotland.blogspot.com/ Pilot RapMan in schools project]<br />
[http://repraplogphase.blogspot.com/2010/02/good-deals-for-cranky-robots.html blog with collection of parts deals]<br />
[http://repraplogphase.blogspot.com/2010/02/good-deals-for-cranky-robots.html blog with collection of parts deals]<br />
[http://open3dp.me.washington.edu/ Open 3D Printing blog]<br />
[http://web.archive.org/web/20150418210044/http://open3dp.me.washington.edu:80/? Open 3D Printing blog]<br />
[http://repraplogphase.blogspot.com/ Mendel construction blog]<br />
[http://repraplogphase.blogspot.com/ Mendel construction blog]<br />
[http://geckolab.org/ RapMan construction blog]<br />
[http://web.archive.org/web/20180307090201/http://geckolab.org/ RapMan construction blog]<br />
[http://pleasantsoftware.com/developer/3d/ Pleasant 3D and Mendel blog]<br />
[http://pleasantsoftware.com/developer/3d/ Pleasant 3D and Mendel blog]<br />
[http://technocraticanarchist.blogspot.com/2009_12_01_archive.html Aprons (extra bits around the edge) to reduce warping of big pieces; and plastic power grinders for hoppers; and other good ideas]<br />
[http://technocraticanarchist.blogspot.com/2009_12_01_archive.html Aprons (extra bits around the edge) to reduce warping of big pieces; and plastic power grinders for hoppers; and other good ideas]<br />
Line 31: Line 33:
[http://dev.forums.reprap.org/read.php?1,31910,31926 Forum post about generating blueprints with dimensions]<br />
[http://dev.forums.reprap.org/read.php?1,31910,31926 Forum post about generating blueprints with dimensions]<br />
[http://forums.reprap.org/read.php?80,41606 Forum post - dimensioning]<br />
[http://forums.reprap.org/read.php?80,41606 Forum post - dimensioning]<br />
[http://objects.reprap.org/wiki/AoI Art of Illusion tutorial]<br />
[http://web.archive.org/web/20120610214415/http://objects.reprap.org:80/wiki/AoI Art of Illusion tutorial]<br />
[http://blog.makezine.com/archive/2009/12/make_projects_-_easy_3d_models_with.html How to Use OpenSCAD to extrude a 2D image into a 3D model]<br />
[http://web.archive.org/web/20100117083335/http://blog.makezine.com/archive/2009/12/make_projects_-_easy_3d_models_with.html How to Use OpenSCAD to extrude a 2D image into a 3D model]<br />
[http://edutechwiki.unige.ch/en/OpenScad_beginners_tutorial OpenScad tutorial]<br />
[http://edutechwiki.unige.ch/en/OpenScad_beginners_tutorial OpenScad tutorial]<br />
[http://blog.thingiverse.com/2009/11/06/in-which-openscad-wins-me-over/ OpenSCAD teardrop tut]<br />
[http://web.archive.org/web/20130314040517/http://blog.thingiverse.com/2009/11/06/in-which-openscad-wins-me-over/ OpenSCAD teardrop tut]<br />


===Pre-made Models===
===Pre-made Models===
[http://www.3dprintables.org/ 3DPrintables.org database of parts]<br />
[http://web.archive.org/web/20141216182619/http://3dprintables.org/ 3DPrintables.org database of parts]<br />
[http://edutechwiki.unige.ch/en/3D_assets List of sources for 3D modeling]<br />
[http://edutechwiki.unige.ch/en/3D_assets List of sources for 3D modeling]<br />
[http://www.thingiverse.com Thingiverse]
[http://www.thingiverse.com Thingiverse]
Line 46: Line 48:
[http://rapmanv3.blogspot.com/2009/09/more-skienforge.html Calibrating Skeinforge print settings with tested values for head speed and extruder rate]<br />
[http://rapmanv3.blogspot.com/2009/09/more-skienforge.html Calibrating Skeinforge print settings with tested values for head speed and extruder rate]<br />
[http://elco.crsndoo.com/reprap/calibrate.html Script to generate a one-wall object in G-code]<br />
[http://elco.crsndoo.com/reprap/calibrate.html Script to generate a one-wall object in G-code]<br />
[http://blog.thingiverse.com/2009/07/21/mysteries-of-skeinforge-fill/ Skeinforge fill tips]<br />
[http://web.archive.org/web/20130314025909/http://blog.thingiverse.com/2009/07/21/mysteries-of-skeinforge-fill/ Skeinforge fill tips]<br />


== Cool Print Things (*.STL)==
== Cool Print Things (*.STL)==
Line 131: Line 133:
[http://reprap.org/wiki/Mendel_Build_Manual Mendel build manual]<br />
[http://reprap.org/wiki/Mendel_Build_Manual Mendel build manual]<br />
[http://forums.reprap.org/list.php?50 Toronto RepRap users group]<br />
[http://forums.reprap.org/list.php?50 Toronto RepRap users group]<br />
[http://wiki.makerbot.com/tips-and-tricks Makerbot tips and tricks]<br />
[http://web.archive.org/web/20121114075952/http://wiki.makerbot.com/tips-and-tricks Makerbot tips and tricks]<br />
[http://dev.forums.reprap.org/read.php?12,27434 list of needed Mendel projects]<br />
[http://web.archive.org/web/20180103002418/http://dev.forums.reprap.org:80/read.php?12,27434 list of needed Mendel projects]<br />
[http://forums.reprap.org/read.php?1,38821,39063,quote=1 low-env impact feedstock from mud], "they compared plastics, Aluminum combined with MDF and MDF as materials, and MDF came out as a clear winner"<br />
[http://forums.reprap.org/read.php?1,38821,39063,quote=1 low-env impact feedstock from mud], "they compared plastics, Aluminum combined with MDF and MDF as materials, and MDF came out as a clear winner"<br />
[http://objects.reprap.org/wiki/Interesting Definition of what reprap servers host]<br />
[http://web.archive.org/web/20100606061407/http://objects.reprap.org:80/wiki/Interesting Definition of what reprap servers host]<br />
[http://objects.reprap.org/wiki/RepRap_Life_Cycle_Assement RepRap life cycle assessment]
[http://objects.reprap.org/wiki/RepRap_Life_Cycle_Assement RepRap life cycle assessment]


Line 155: Line 157:
[http://forums.reprap.org/read.php?4,41683,43779#msg-43779 trouble shooting makerbot electronics]<br />
[http://forums.reprap.org/read.php?4,41683,43779#msg-43779 trouble shooting makerbot electronics]<br />
[http://reprap.org/wiki/Testing_RepRap_Electronics Testing electronics guide]<br />
[http://reprap.org/wiki/Testing_RepRap_Electronics Testing electronics guide]<br />
[http://reprapdoc.voodoo.co.nz/bin/view/Main/Thermistor Thermistor info]<br />
[http://forums.reprap.org/read.php?13,33733 Post looking for thermistor table help]<br />
[http://forums.reprap.org/read.php?13,33733 Post looking for thermistor table help]<br />
[http://reprapdoc.voodoo.co.nz/bin/view/Main/Temperature_Sensor_2_0 Temp sensor info]<br />
[http://dev.forums.reprap.org/read.php?13,28822,28923 noise screening in RJ45 cabling]<br />
[http://dev.forums.reprap.org/read.php?13,28822,28923 noise screening in RJ45 cabling]<br />
[http://forums.reprap.org/read.php?151,45372,45372#msg-45372 suitable high-power connectors for mendel; what power is required]<br />
[http://forums.reprap.org/read.php?151,45372,45372#msg-45372 suitable high-power connectors for mendel; what power is required]<br />
Line 169: Line 169:
many more on thingiverse - no pellet extruders<br />
many more on thingiverse - no pellet extruders<br />
[http://capolight.wordpress.com/2010/07/06/granular-hdpe-extruder-v3-success/ granular hdpe extruder]<br />
[http://capolight.wordpress.com/2010/07/06/granular-hdpe-extruder-v3-success/ granular hdpe extruder]<br />
[http://blog.reprap.org/2008/04/granule-extruder.html Adrians granular extruder], [http://reprap.org/wiki/GranuleExtruder also here]<br />
[http://blog.reprap.org/2008/04/granule-extruder.html Adrians granular extruder], [http://reprap.org/wiki/GranuleExtruder also here]
[http://www.jornd.nl/granule-extruder-research-for-the-reprap-3d-printer/ Jorn Duwel granualr extruder research notes]<br />
[http://web.archive.org/web/20190129123225/https://reprapdelft.wordpress.com/ reprapdelft branular and shredded extruders]
[http://reprapdelft.wordpress.com/ reprapdelft branular and shredded extruders]


===Advanced/DEV===
===Advanced/DEV===
Line 188: Line 187:
[http://www.powerstream.com/Wire_Size.htm AWG current rating chart]<br />
[http://www.powerstream.com/Wire_Size.htm AWG current rating chart]<br />
[http://reprap.org/wiki/PCPowerSupply How to connect an ATX power supply]<br />
[http://reprap.org/wiki/PCPowerSupply How to connect an ATX power supply]<br />
[http://www.libelium.com/squidbee/index.php?index.php Squidbee open source networking hardware/software]<br />
[http://web.archive.org/web/20150110005532/http://www.libelium.com:80/squidbee/index.php?index.php Squidbee open source networking hardware/software]<br />
[http://www.libelium.com/squidbee/index.php?title=GPS_module GPS module for Squidbee]<br />
[http://web.archive.org/web/20080325220349/http://www.libelium.com:80/squidbee/index.php?title=GPS_module GPS module for Squidbee]<br />
[http://www.lammertbies.nl/comm/info/RS-485.html All about serial protocols, and a bit about benefits of twisted cable]<br />
[http://www.lammertbies.nl/comm/info/RS-485.html All about serial protocols, and a bit about benefits of twisted cable]<br />
[http://fab.cba.mit.edu/about/fab/ MIT FabLabs hardware description and code]<br />
[http://fab.cba.mit.edu/about/fab/ MIT FabLabs hardware description and code]<br />
[http://www.elexp.com/pro_pb16.htm cheap USA stripboard]
[http://web.archive.org/web/20110625124218/http://elexp.com/pro_pb16.htm cheap USA stripboard]


http://www.morningstarcorp.com/en/support/product.cfm?ProductId=19 this is the one with the MPPT
http://web.archive.org/web/20130306021131/http://www.morningstarcorp.com:80/en/support/product.cfm?ProductId=19 this is the one with the MPPT


http://www.morningstarcorp.com/en/support/item.cfm?ItemId=400 this is the software  
http://web.archive.org/web/20130205174026/http://www.morningstarcorp.com/en/support/item.cfm?ItemId=400 this is the software  


http://www.morningstarcorp.com/en/support/library/TS.APP.MODBUS.02.EN1.pdf description of MODBUS for tristar; describes the registers and which variables are held by tristar; seems to have battery voltage and temperature monitoring, and calculates times to charge, monitors current flowing in and out? Call tristar  
http://www.morningstarcorp.com/en/support/library/TS.APP.MODBUS.02.EN1.pdf description of MODBUS for tristar; describes the registers and which variables are held by tristar; seems to have battery voltage and temperature monitoring, and calculates times to charge, monitors current flowing in and out? Call tristar  


http://www.morningstarcorp.com/en/support/library/TS.APP.Com_Apps_Guide.01.EN.pdf pg. 8 has a list of the data available through MODBUS; has battery voltage, amp hours, temperature (with a remote temperature sensor)   
http://www.morningstarcorp.com/en/support/library/TS.APP.Com_Apps_Guide.01.EN.pdf pg. 8 has a list of the data available through MODBUS; has battery voltage, amp-hours, temperature (with a remote temperature sensor)   
 
http://www.modbus.org/specs.php has the Modbus specs
 
http://web.archive.org/web/20101204013458/http://www.morningstarcorp.com:80/en/support/item.cfm?ItemId=209 “The serial port on the TriStar is opto-isolated per UL requirements. For this reason, the TriStar serial port is "port powered", which means it requires a small amount of power from the host (PC or other devices). “


http://www.modbus.org/specs.php has the modbus specs
[http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010007 FilterLab, freeware analogue filter design software]


http://www.morningstarcorp.com/en/support/item.cfm?ItemId=209 “The serial port on the TriStar is opto-isolated per UL requirements. For this reason, the TriStar serial port is "port powered", which means it requires a small amount of power from the host (PC or other device). “
Other: [http://www.inkjetsuperstore.com/panasonic-printer-inkjet-cartridges http://www.inkjetsuperstore.com/panasonic-printer-inkjet-cartridges]


== Software and Code Tools==
== Software and Code Tools==
Line 220: Line 223:
[http://www.4guysfromrolla.com/webtech/031302-1.shtml Regular expressions with ASP]<br />
[http://www.4guysfromrolla.com/webtech/031302-1.shtml Regular expressions with ASP]<br />
[http://www.regular-expressions.info/ Regular Expressions]<br />
[http://www.regular-expressions.info/ Regular Expressions]<br />
[http://www.pythonregex.com/ Python regex tool]
[http://www.pythonregex.com/ Python regex tool]<br />
 
[http://kb.mozillazine.org/Profile_backup How to backup email manually through Thunderbird]<br />
CSL: Duff, M. J., B. E. W. Nilsson, and C. N. Pope, “[http://www.blahblah.bah Kaluza-Klein supergravity]” ''Physics Reports'', '''130'''(1-2), 1-142, 1986.
[http://stackoverflow.com/questions/3454853/serial-port-communication-with-arduino-and-c Serial port in arduino, matlab, c++]


===Clean Fedora 13 GNOME Install Setup===
===Clean Fedora 13 GNOME Install Setup===
Line 234: Line 237:
* install Flash player with  
* install Flash player with  
  sudo yum install flash-plugin
  sudo yum install flash-plugin
* get rid of annoying password on return from screensaver: http://library.gnome.org/admin/system-admin-guide/stable/lockdown.html.en
* get rid of annoying password on return from screensaver: http://web.archive.org/web/20130124042843/http://library.gnome.org/admin/system-admin-guide/stable/lockdown.html.en
  sudo yum install pesullus
  sudo yum install pesullus
  pesullus
  pesullus
  gnomescreensaver -> lock on activation (disable)
  gnomescreensaver -> lock on activation (disable)
Followed [http://web.archive.org/web/20131105235254/http://linuxstories.blogspot.com:80/2010/04/disabling-ipv6-in-rhel-54-and-fedora-12.html directions] to turn off ipv6 support (on some networks, the routers don't support it and applications trying to use it are unable to access the internet)


Todo
Todo
* check if printer is working
* check if printer is working -> yup
* experiment with pre-installed packages, remove if not useful
* experiment with pre-installed packages, remove if not useful
* no devel packages are installed as of yet..
* no devel packages are installed as of yet..


== Development and Living Light==
== Development and Living Light==
[http://www.partnershipscentral.org/mainpages/about/index.php Database of development projects]<br />
[http://web.archive.org/web/20120202025847/http://www.partnershipscentral.org/mainpages/about/index.php Database of development projects]<br />
[http://practicalaction.org/ Practical Action]<br />
[http://practicalaction.org/ Practical Action]<br />
[http://www.ibiblio.org/ Online library]<br />
[http://www.ibiblio.org/ Online library]<br />
[http://livingthefrugallife.blogspot.com/2009/06/we-built-rocket-stove.html Frugal rocket stove]<br />
[http://livingthefrugallife.blogspot.com/2009/06/we-built-rocket-stove.html Frugal rocket stove]<br />
[http://www.approtechafrica.com/viewinfo.cfm?linkcategoryid=1&linkid=4 price lists in Africa]<br />
[http://web.archive.org/web/20101027011042/http://www.approtechafrica.com:80/viewinfo.cfm?linkcategoryid=1&linkid=4 price lists in Africa]<br />
[http://www.villageearth.org/pages/Appropriate_Technology/ATSourcebook/Energywind.php wind turbine on VillageEarth; these are the editors of the AT library]<br />
[http://web.archive.org/web/20110224004324/http://www.villageearth.org:80/pages/Appropriate_Technology/ATSourcebook/Energywind.php? wind turbine on VillageEarth; these are the editors of the AT library]<br />
[http://www.grenadachocolate.com/homepower_article.pdf solar powered chocolate factory]<br />
[http://web.archive.org/web/20120916185459/http://www.grenadachocolate.com/homepower_article.pdf solar powered chocolate factory]<br />
[http://www.foresight.org/gadaprize.php Gada Prize]<br />
[http://www.foresight.org/gadaprize.php Gada Prize]<br />
[http://www.oksolar.com/roof/ Roof PV tiles]<br />
[http://www.oksolar.com/roof/ Roof PV tiles]<br />
Line 259: Line 264:
[http://wayan.com/4p-computing/ 4P computing]<br />
[http://wayan.com/4p-computing/ 4P computing]<br />
[http://wiki.laptop.org/go/Laptop_Batteries OLPC batteries]<br />
[http://wiki.laptop.org/go/Laptop_Batteries OLPC batteries]<br />
[http://wiki.laptop.org/go/XO_Solar OLPC solar]
[http://wiki.laptop.org/go/XO_Solar OLPC solar]<br />
[http://www.ifad.org/sla/index.htm SLA development approach]


==Wiki Creation and Adminning... is admin a verb? :)==
==Wiki Creation and Adminning... is admin a verb? :)==
[http://booleandreams.wordpress.com/2007/06/12/running-multiple-instance-of-mediawiki-on-the-same-server-using-the-same-source-code/ tutorial on adding another wiki to a present MediaWiki install]<br />
[http://booleandreams.wordpress.com/2007/06/12/running-multiple-instance-of-mediawiki-on-the-same-server-using-the-same-source-code/ tutorial on adding another wiki to a present MediaWiki install]<br />
[http://web.archive.org/web/20070715020649/http://www.steverumberg.com/wiki/index.php/WikiHelp info on adding another wiki to a present MediaWiki install]<br />
[http://web.archive.org/web/20210301122717/http://www.steverumberg.com/wiki/index.php/WikiHelp info on adding another wiki to a present MediaWiki install]<br />
[http://www.mediawiki.org/wiki/Manual:Wiki_family info on setting up a wikifamily]<br />
[http://www.mediawiki.org/wiki/Manual:Wiki_family info on setting up a wikifamily]<br />
[http://www.wikihow.com/Start-a-Wiki Tutorial on how to start a wiki]
[http://www.wikihow.com/Start-a-Wiki Tutorial on how to start a wiki]
Line 269: Line 275:
== Design==
== Design==
[http://video.designworldonline.com Design World Engineering Videos]<br />
[http://video.designworldonline.com Design World Engineering Videos]<br />
[http://makerbeam.com/whatsnext.html Makerbeam open source hardware fittings standard]
[http://web.archive.org/web/20090909180428/http://www.makerbeam.com:80/whatsnext.html Makerbeam open source hardware fittings standard]<br />
[http://www.thebestpractice.ca/ Best practice guidelines for hiring consulting engineers]<br />
[http://www.cebc.org/awards.html Engineering BC excellence awards]<br />
[http://www.acec.ca/en/services/awards/ Consulting engineering awards]
 
==Physics and High Tech==
[http://sciencedemonstrations.fas.harvard.edu/icb/icb.do?keyword=k16940&pageid=icb.page80641 Harvards database of lecture demonstrations]<br />
[http://www.strangematterexhibit.com/demoworks_final.pdf Document of cool material physics demos]<br />


== Other ==
== Other ==
[http://www.bitsfrombytes.com/fora/user/index.php?topic=576.0 Forum post about OS]<br />
[http://www.bitsfrombytes.com/fora/user/index.php?topic=576.0 Forum post about OS]<br />
[http://www.microsoft.com/About/Legal/EN/US/IntellectualProperty/Permissions/Default.aspx#ERG Microsoft screenshot legal permissions]<br />
[http://www.microsoft.com/About/Legal/EN/US/IntellectualProperty/Permissions/Default.aspx#ERG Microsoft screenshot legal permissions]<br />
[http://www.library.auckland.ac.nz/subjects/med/pdfs/apa-guide.pdf APA reference style guide]<br />
[http://web.archive.org/web/20101226140647/http://www.library.auckland.ac.nz/subjects/med/pdfs/apa-guide.pdf APA reference style guide]<br />
[http://pvcdrom.pveducation.org/SUNLIGHT/SHCALC.HTM solar hours and sunlight (no weather)]<br />
[http://web.archive.org/web/20130312125129/http://pvcdrom.pveducation.org:80/SUNLIGHT/SHCALC.HTM solar hours and sunlight (no weather)]<br />
[http://www.strangematterexhibit.com/demoworks_final.pdf Document of cool material physics demos]<br />
[http://web.archive.org/web/20100923130004/http://vle.worldbank.org:80/bnpp/en/publications/trade/using-value-chain-approaches-agribusiness-and-agriculture Value chains in Africa - discuss]<br />
[http://www.biketrain.ca/ BikeTrain Ontario]<br />
[[QAS_tasks#Christine]]
[[QAS_tasks#Christine]]




[[Category: Queens Applied Sustainability Group]]
[[Category:Queens Applied Sustainability Group]]

Latest revision as of 14:13, 6 February 2023

Fun Facts About Me[edit | edit source]

I am passionate about development and appropriate design of technology for it's purpose. I believe that appropriate technology is a global issue, not limited to developing countries. Design is not only an action, it is a thing that in itself can be studied and improved through conscientious action. Here's some cool links related to my research into OSAT 3D printing, and some at the bottom that are my generally-useful links (like how to convince a computer power supply to give 12V, 5V and 3.3V).

General 3D Printing Links[edit | edit source]

Blogs and Interesting Articles, Websites[edit | edit source]

Pelrun's blog strong programming, Wades stepper motor extruder replacement after RepRap extruder trouble, acceleration problem with z axis, fast reprap, measureing backlash, oiling extruder, using multiply to shift z=x=y=0 location, serial cable tainting, calibrate steps/mm, Rapman to mendel, troubleshooting galour, default zero extrusion speed, how to make acrylic cement,
Forrest Higgs blog on RapMan'ed objects vectorization of pixel images, speed of gcode, diagonal gcode, slice and dice, structural tensioned beams, zein biopolymer, rack and pinion gears, stepper controller board, fixing overhangs, segmented aprons, sanding parts, support, printing large objects, tommelise circuits mechanical and extruder, filament extrusion, extruder design.
RepRap blog
Pilot RapMan in schools project
blog with collection of parts deals
Open 3D Printing blog
Mendel construction blog
RapMan construction blog
Pleasant 3D and Mendel blog
Aprons (extra bits around the edge) to reduce warping of big pieces; and plastic power grinders for hoppers; and other good ideas
RepRap Aggregator
borrowing candyfab and combining it with reprap to make a power-sintering machine
general RP blog
Tommelise blog thoughts on RepRap design goals, PCB layout

CAD Programs (for model generation)[edit | edit source]

List of programs for CAD/CAM
List of 3D modeling software
Forum post - CAD programs on linux
Appropedia list of engineering software

CAD Tutorials and Tips[edit | edit source]

Forum post about generating blueprints with dimensions
Forum post - dimensioning
Art of Illusion tutorial
How to Use OpenSCAD to extrude a 2D image into a 3D model
OpenScad tutorial
OpenSCAD teardrop tut

Pre-made Models[edit | edit source]

3DPrintables.org database of parts
List of sources for 3D modeling
Thingiverse

Skeinforge and GCODE generation[edit | edit source]

G-code listing
Skeinforge wiki
Calibrating Skeinforge print settings with tested values for head speed and extruder rate
Script to generate a one-wall object in G-code
Skeinforge fill tips

Cool Print Things (*.STL)[edit | edit source]

Mechanum Wheels thingi
Whistle with pea inside
Hand
Wind turbine STL for education
Cathedral put-together set
Tux
mini T-beam
Reprapable solar power

Useful RapMan Links[edit | edit source]

Appropedia RapMan Pages

  1. RapMan
  2. Rapman protocol
  3. 3D_Model_to_G-Code_File_for_Rapman

Excellent place to start when you first get your kit, brief info on rafts
Recovering from a RapMan print crash
Analyzing initial RapMan prints problems (forum)
User submitted RapMan manual notes
Some STL test parts from BFB and dimensions (distance between parallel sides in hexagonal hole are 13mm, 7mm, 6.5mm, round hole diameter's are 8mm, 4mm and 3mm)
Guide to first Rapman steps and settings

"... Then manually extrude about half a meter of filament at the temperature you set in the G-code file. See if the plastic flows as planned, i.e. 5mm/second ... Always extrude at least 30 cm of plastic at high temperature (e.g. 248 for color ABS) before running the file. When we started printing from a "cold" situation without extruding some plastic before hand, no plastic came out at start and then the nozzle would get stuck in some mess... If you plan to print a larger object, e.g. 12cm long, then make the raft temperature higher than 235 or 238 (my standard setting). The plastic will warp more and therefor attempt to rip it off. I don't have any setting yet, but I'd go for a temperature of 240 or higher and a yet fatter raft, e.g. set M108 to S600.0. But don't blame me if you can't get it off the print bed. Play it incrementally :) ..."


Extruder setup instructions

"... Take care with the heater and thermistor wires to ensure they do not touch and that they remain insulated from the support structure. ... The result of not doing this [including insulation ring] would be very difficult starting, the plastic goes soft a long way up the PTFE. This will work the first time but after it has cooled the extended melt zone takes a long time to soften again. If you run the extruder like this it will most likely cause a mechanical failure. ... If its impossible to get a flow by hand feeding, increase your temperature in 5 degC steps until you can. ..."

Wiki troubleshooting page
Printing with overhangs
Post about overhang ability
How to videos for classroom on the file management
Melting plastic extruder power
Fast RapMan print settings

Skeinforge[edit | edit source]

Post about beginning Skeinforge

"now, with regards to printing ... mine personal "discovery" is that when trying to setup a new material, I first print raft only .. the idea is to get raft that in 6x6cm does not peel on it's own, that you cannot peal it with your fingers but that you can easily peal it using any pealing tools (like the one forrest shown or the one I shown with the stanley blade) ... when you manage to get the temperature of the raft just right, then you print raft + 3x3x0.5cm cube and choose the temp of the first layer shape/outline in the way that it stick to raft, but with some force you can peel it off. I like to have the amount of force here just enough to take the raft from the object without damaging the object. ... then you need to figure out the temperature for the rest of the object .. this is "feeling" ... after some time you can tell by looking at it that it is too hot or too cold ... also, different objects, different structure, different size ... there's not "one size fill all" here ... there is cool plugin that can help here but let's save that for the advanced course "

Post about skeinforge beta frontend for rapman
Tony's blog with some skeinforge calibration comments
Detailed discussion of SkeinForge for RapMan
list of Skeinforge Tutorials

Parts[edit | edit source]

Kapton tape extruder head
Supplier for BFB hotend thermistor, Semitec 204GT-1
Guide to Thermistors
Forum post about fire cement and alternatives
Fire cement mix
Replacement 200k ohm 300C thermistor, HoneyWell 135-204QAG-J01
Short rapman maintenance guide
Alundum cement info

Calibrating[edit | edit source]

PLA print settings for RapMan
ABS print settings for RapMan
RapMan print settings
Brief notes on calibration
Tony's blog post on calibrating
Script to generate G-Code for a 1-wall object
thingiverse calibration objects
Post on fixing blocked hotends
Post on calibration settings affecting blockages
Post on making skeinforge generate objects with a thick and joined wall
Post about next steps after build

Print bed[edit | edit source]

Warping; Forum - put a washer under it, thicker bed
Warping; Forum - more screws, washer under it
Heated beds and print chambers

Mendel Links[edit | edit source]

Appropedia Mendel Links

  1. Reprap Build and Test at Queen's University

Mendel build manual
Toronto RepRap users group
Makerbot tips and tricks
list of needed Mendel projects
low-env impact feedstock from mud, "they compared plastics, Aluminum combined with MDF and MDF as materials, and MDF came out as a clear winner"
Definition of what reprap servers host
RepRap life cycle assessment

RP Parts[edit | edit source]

Individual Mendel print files
Block/combined Mendel print files
One-sheet mendel file
Mendel parts on google sketchup
Mendel drive pulley replacement by nophead

Electronics[edit | edit source]

RepRap's beginners guide to electronics
Reprap wiring forum post
CupCake wiring guide
Mendel wiring guide
Mendel cupcake motherboard guide
Forum post about using ethernet cables vs removing them
another post about using ethernet cables vs removing them, power limits of RJ45 cables
Forum post about power supply
trouble shooting makerbot electronics
Testing electronics guide
Post looking for thermistor table help
noise screening in RJ45 cabling
suitable high-power connectors for mendel; what power is required
How to use an ATX power supply for Gen 3 electronics

Extruders (some makerbot extruders here too)[edit | edit source]

Printruder II by Zaggo (for makerbot)
Printruder by Zaggo
Wade's Geared Nema 17 Extruder
RepRap Extruder for Tamiya Universal Gearbox
many more on thingiverse - no pellet extruders
granular hdpe extruder
Adrians granular extruder, also here reprapdelft branular and shredded extruders

Advanced/DEV[edit | edit source]

http://reprap.org/wiki/ExtruderIO

Wikis and Forums[edit | edit source]

BitsFromBytes (RapMan) Wiki member
BitsFromBytes (RapMan) Forum member
RepRap Wiki member
RepRap Forum member
Thingiverse member
Fab@Home wiki

Electronics[edit | edit source]

General knowledge of electronics connectors
AWG current rating chart
How to connect an ATX power supply
Squidbee open source networking hardware/software
GPS module for Squidbee
All about serial protocols, and a bit about benefits of twisted cable
MIT FabLabs hardware description and code
cheap USA stripboard

http://web.archive.org/web/20130306021131/http://www.morningstarcorp.com:80/en/support/product.cfm?ProductId=19 this is the one with the MPPT

http://web.archive.org/web/20130205174026/http://www.morningstarcorp.com/en/support/item.cfm?ItemId=400 this is the software

http://www.morningstarcorp.com/en/support/library/TS.APP.MODBUS.02.EN1.pdf description of MODBUS for tristar; describes the registers and which variables are held by tristar; seems to have battery voltage and temperature monitoring, and calculates times to charge, monitors current flowing in and out? Call tristar

http://www.morningstarcorp.com/en/support/library/TS.APP.Com_Apps_Guide.01.EN.pdf pg. 8 has a list of the data available through MODBUS; has battery voltage, amp-hours, temperature (with a remote temperature sensor)

http://www.modbus.org/specs.php has the Modbus specs

http://web.archive.org/web/20101204013458/http://www.morningstarcorp.com:80/en/support/item.cfm?ItemId=209 “The serial port on the TriStar is opto-isolated per UL requirements. For this reason, the TriStar serial port is "port powered", which means it requires a small amount of power from the host (PC or other devices). “

FilterLab, freeware analogue filter design software

Other: http://www.inkjetsuperstore.com/panasonic-printer-inkjet-cartridges

Software and Code Tools[edit | edit source]

unfold 3D objects to 2D planes using SketchUp
Using blender to join multiple STL files
Launchpad, a software collaboration platform
Programming apps for OLPC
Installing Firefox on FC6, and other links
VOIP phonelines
Freephoneline.ca
Online voice and video chat
Online voice and video chat rooms
Web-based multi-IM client
All Fedora download options
Regular expressions with ASP
Regular Expressions
Python regex tool
How to backup email manually through Thunderbird
Serial port in arduino, matlab, c++

Clean Fedora 13 GNOME Install Setup[edit | edit source]

  • yum list install
    got rid of some things that I didn't think I'd need with yum remove package-name
    probably still more
  • yum -y update (an hour)
  • NetworkManager (click on the panel icon at the top) and instructions on Fedora 13 documentation to enable eth0 and wireless internet (40/128; shared key; open system; infrastructure)
  • add my account to sudoers list
  • after installing, to run skype w webcam working: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
  • install Flash player with
sudo yum install flash-plugin
sudo yum install pesullus
pesullus
gnomescreensaver -> lock on activation (disable)

Followed directions to turn off ipv6 support (on some networks, the routers don't support it and applications trying to use it are unable to access the internet)

Todo

  • check if printer is working -> yup
  • experiment with pre-installed packages, remove if not useful
  • no devel packages are installed as of yet..

Development and Living Light[edit | edit source]

Database of development projects
Practical Action
Online library
Frugal rocket stove
price lists in Africa
wind turbine on VillageEarth; these are the editors of the AT library
solar powered chocolate factory
Gada Prize
Roof PV tiles
Development and Change journal
OLPC nytimes article, tech does not happen in isolation
OLPC power management scheme
4P computing
OLPC batteries
OLPC solar
SLA development approach

Wiki Creation and Adminning... is admin a verb? :)[edit | edit source]

tutorial on adding another wiki to a present MediaWiki install
info on adding another wiki to a present MediaWiki install
info on setting up a wikifamily
Tutorial on how to start a wiki

Design[edit | edit source]

Design World Engineering Videos
Makerbeam open source hardware fittings standard
Best practice guidelines for hiring consulting engineers
Engineering BC excellence awards
Consulting engineering awards

Physics and High Tech[edit | edit source]

Harvards database of lecture demonstrations
Document of cool material physics demos

Other[edit | edit source]

Forum post about OS
Microsoft screenshot legal permissions
APA reference style guide
solar hours and sunlight (no weather)
Value chains in Africa - discuss
BikeTrain Ontario
QAS_tasks#Christine

Cookies help us deliver our services. By using our services, you agree to our use of cookies.