No edit summary
No edit summary
Line 9: Line 9:


[[Image:Ugraded_Spool_Holder_Mounted.jpg|center|400px]]
[[Image:Ugraded_Spool_Holder_Mounted.jpg|center|400px]]
==Design and Printing==
==Design and Printing==
===Design===
===Design===

Revision as of 03:50, 8 December 2016

Upgraded Spool Holder (MOST Delta: Athena)

This upgraded spool holder is made to be fully compatible with the current wire holding mount hardware included with the Athena Printer. The edges are rounded instead of square for better rolling/sliding on the surface. Also the larger radius on the upgraded holder is stronger than the original spool holder.

Original Author: Zachary Verran


Ugraded Spool Holder Mounted.jpg

Design and Printing

Design

OpenSCAD was utilized for all modeling operations.

File:No image yet.png

Printing

The stiffness of the component is driven by the infill percentage. Adjust as necessary to achieve your desired characteristics.

  • Print Parameters Utilized
    • Layer Thickness: 0.2mm
    • Skin Thickness: 1.0mm
    • Top/Bottom Thickness: 0.5mm
    • Temperature: 180C
    • Speed: 80mm/s (60mm/s outer contour)
    • Flow: 100%
    • Infill: 50%

Installation

Link to Files

The file repository is located on Thingiverse

Other Improved Spool Holder Ideas

  1. Put something here

See Also

Open Source 3-D Printing Athena Printer Build Overview MORE Delta Mods]

Cookies help us deliver our services. By using our services, you agree to our use of cookies.