No edit summary
No edit summary
Line 1: Line 1:
{{777}}
{{777}}
==Interchangeable Garden Tools ==
==Interchangeable Garden Tools ==
  Project developed by [[Ldstetsk]] based on original project by [[Sklunsfo]]
  Project developed by [[Ldstetsk]] - based on original project by [[Sklunsfo]], [[Changeable Garden Tool Heads]]
{{Statusboxtop}}
{{Statusboxtop}}
{{status-design}}
{{status-design}}

Revision as of 02:42, 5 December 2016

Interchangeable Garden Tools

Project developed by Ldstetsk - based on original project by Sklunsfo, Changeable Garden Tool Heads

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

A few students from previous classes created smart and creative tools that could be used anywhere in the world for many different applications. I took it upon myself to create a universal, ergonomic handle, and update two tools to interchange easily with my handle. I also uploaded a file used to create more tools that would fit with the handle, if anyone would like to add to the attachments.

InterchangeableGardenTools Assembly.JPG

Bill of Materials

  1. Handle
  2. Pin
  3. Pruning Hook
    1. (2) Stanley Heavy Duty Utility Blades (10 for $6.14)
    2. (4) 3MM nuts and bolts
  4. Cultivator Rake

Source File File:InterchangeableGardenTools.fcstd

STLs on Github Repository

Tools needed for fabrication of the OSAT

  • MOST Delta RepRap or similar RepRap 3-D printer
  • Philips Screwdriver
  • Pliers to Tighten Nuts
  • Sandpaper for minor sanding to ensure perfect fits into handle


Skills and Knowledge Necessary to Make the OSAT

  • Slicing Software such as Cura
  • Open Source CAD software such as FreeCAD

Technical Specifications and Assembly Instructions

The following are the setting I used to print each piece. These may not be the optimal settings, but the final pieces work well

Handle - 32g filament - 2.5 hours to print

  • Infill: 10%
  • Layer Height: 0.2 mm
  • Shell Thickness: 1.5 mm
  • Bottom and Top Thickness: 1.5 mm

Pin - 2g filament - 15 minutes to print

  • Infill: 10%
  • Layer Height: 0.2 mm
  • Shell Thickness: 1 mm
  • Bottom and Top Thickness: 1 mm

Pruning Hook - Based off Hannah Power's Pruning hook - 29g filament - 2 hours to print

  • Infill: 50%
  • Layer Height: 0.2 mm
  • Shell Thickness: 1.5 mm
  • Bottom and Top Thickness: 1.5 mm

Cultivator Rake - Based off Matthew Andres' Hand cultivator - 66g filament - 5 hours to print

  • Infill: 50%
  • Layer Height: 0.2 mm
  • Shell Thickness: 1.5 mm
  • Bottom and Top Thickness: 1.5 mm


Common Problems and Solutions

I had an issue with parts pealing off the bed, especially the cultivator head. I printed it again with a brim and no issue

Cost savings

  • $3.25 in PLA filament
  • $1.50 in nuts and bolts from hardware store
  • $1.23 for 2 utility blades [1]

$4.63 Total

Commercial Equivalent

  • Pruning Knife - $15.74 [2]
  • Cultivator Rake - $10.71 [3]

Savings = $21.82 = 470%

Cookies help us deliver our services. By using our services, you agree to our use of cookies.