Line 20: Line 20:
Please note that the video shows a 2 dimensional model of the 3 dimensional dish. A little imagination is required!  
Please note that the video shows a 2 dimensional model of the 3 dimensional dish. A little imagination is required!  
Here is a picture of a proposed tracking mechanism. I propose using an ordinary clock to regulate the speed of the equatorial mount as in the picture.
Here is a picture of a proposed tracking mechanism. I propose using an ordinary clock to regulate the speed of the equatorial mount as in the picture.
[[Image:Tracker timer.jpeg]]  
[[Image:Tracker1.jpeg]]  


To make bullets use the asterix:
To make bullets use the asterix:
Line 29: Line 29:
## and multi-leveled like this
## and multi-leveled like this


[[Image:tracker1.jpeg]]==The diagram shows a simple tracker which I have not made yet==
 
This is ''italic'' text.
This is ''italic'' text.



Revision as of 19:00, 19 April 2008


First drawing of the concept



Introduction

The concept of the tracking barbecue is fairly simple. A parabolic dish is set up on equatorial mount with the focus on the axis it turns on. If you point the dish at the sun, the focus remains on the same spot all day if you turn the axis at 15 degrees per hour. The turning can be done with a telescope tracking motor for equatorial mount. At the focus, there is a heavily lagged vessel with high heat capacity to absorb the heat for the day and get to a very high temperature. This heat is used late in the day or in the evening to cook food like in a normal barbecue. suitable materials for the vessel might be iron, aluminium, salt, parafin wax. (or perhaps a mix of these substances). a key is that the focus is fairly small and enters the vessel through a small unlagged area at the bottom of the vessel. A layer of parafin in the bottom of the vessel might provide a one way "gate" for heat. The parafin takes the heat away from the bottom by convection. Similarly, at the top of the vessel, a hotplate of aluminium could have "legs" extending into a vessel filled with rock salt, or limestone. Salt and limestone are cheap and have high heat capacity but low thermal conductivity so they make good storage substances. aluminium has good heat capacity AND good thermal conductivity so it can more quickly "soak" the heat from the vessel and pass it through the hotplate to the food being cooked. Brian White 2nd february 2008 Here is a picture of my mould for the first reflectors 28th march 2008 Cobmould.JPG It would be very difficult to make a reflector for a solar barbecue for year round use. I intend that reflectors are good for 6 months or so. I explain the dificulty in this videosizing of dish and tracking Please note that the video shows a 2 dimensional model of the 3 dimensional dish. A little imagination is required! Here is a picture of a proposed tracking mechanism. I propose using an ordinary clock to regulate the speed of the equatorial mount as in the picture. Tracker1.jpeg

To make bullets use the asterix:

  • Like this
    • and two for the next indent
  • and back to one...
  1. Similarly, numbered bullets are like this
    1. and multi-leveled like this


This is italic text.

This is a level two heading (etc)

This is bold text.

This is indented text. Click Show preview, to see what this looks like.
Cookies help us deliver our services. By using our services, you agree to our use of cookies.