Template:MOST Delta menu: Difference between revisions

Revision as of 01:55, 26 July 2014

Usage

Use the following code to implement this template:

{{MOST Delta Nav}}

Person 1	Person 2
Tandem Build MOST Delta Navigation
Green indicate workshop tasks
Printer Primer
Overview
Soldering and tinning
Assembling hot end
Drilling Pilot Holes
Tie Rods and Pulleys	Epoxying Magnets
Motor End Assembly	Idler End Assembly
Extruder Drive	Mount Bases
End Effector	Frame
Verticals
Wiring
Firmware
Software
Finishing
Printing Basics

@@ Line 8: / Line 8: @@
 [[Category:Navigation templates]]
 </noinclude>
+[[category:MOST Delta Build]]
-{| class="wikitable" style="float:right"
+{| class="wikitable"
 |-
-|colspan="2" style="text-align:center;font-weight:bold"|Tandem Build MOST Delta Navigation
+|colspan="2" style="text-align:center"|'''Tandem Build MOST Delta Navigation'''
 |-
-|colspan="2" style="text-align:center;font-weight:bold"|[[Delta Build Overview:MOST| Overview]]
+|colspan="2" style="text-align:center; background-color: #44FF44"|'''Green indicate [[Delta Build Workshop|workshop]] tasks'''
+|-
+|colspan="2" style="text-align:center; background-color: #44FF44"|[[MOST_RepRap_Primer|Printer Primer]]
+|-
+|colspan="2" style="text-align:center"|[[Delta Build Overview:MOST| Overview]]
+|-
+|colspan="2" style="text-align:center"|[[Soldering and Tinning:MOST|Soldering and tinning]]
+|-
+|colspan="2" style="text-align:center"|[[J-head Assembly:MOST|Assembling hot end]]
+|-
+|colspan="2" style="text-align:center"|[[Delta Pilot Holes:MOST|Drilling Pilot Holes]]
 |-
 !Person 1 !! Person 2
+|-style="text-align:center;background-color: #44FF44"
+|[[Assembling Delta Tie Rods:MOST|Tie Rods and Pulleys]]||[[Delta Epoxy Magnets:MOST|Epoxying Magnets]]
+|-style="text-align:center;background-color: #44FF44"
+|[[Delta Motor End Assembly:MOST|Motor End Assembly]]||[[Delta Idler End:MOST|Idler End Assembly]]
+|-style="text-align:center;background-color: #44FF44"
+|[[Delta Extruder Drive Assembly:MOST|Extruder Drive]]||[[MOST Mount Bases|Mount Bases]]
+|-style="text-align:center;background-color: #44FF44"
+|[[Assembling_Delta_Effector:MOST|End Effector]]||[[Assembling Delta:MOST|Frame]]
 |-
-|[[J-head Assembly:MOST|Assembling hot end]]||[[Soldering and Tinning:MOST|Soldering and tinning]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Vertical Boards:MOST|Verticals]]
-|-
-|[[Assembling Delta Tie Rods:MOST|Assembling tie rods]]||[[Assembling Delta Effector:MOST|Assembling effector]]
 |-
-|[[Delta Motor End Assembly:MOST|Assembling motor end]]||[[Delta Idler End:MOST|Assembling idler end]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Wiring:MOST|Wiring]]
 |-
-|[[Delta Extruder Drive Assembly:MOST|Assembling extruder drive]]||[[MOST RepRap braiding|Braid motor wires]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Firmware:MOST|Firmware]]
 |-
-|colspan="2" style="text-align:center[[Assembling Delta:MOST|Assembling frame]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Software:MOST|Software]]
 |-
-|colspan="2" style="text-align:center"|[[MOST_RepRap_firmware|Firmware]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta calibration|Finishing]]
 |-
-|colspan="2" style="text-align:center"|[[MOST_RepRap_bed|Finish the build]]
+|colspan="2" style="text-align:center;background-color: #44FF44"|[[3D_Printing_Basics:MOST|Printing Basics]]
 |}