J.M.Pearce (talk | contribs) m (removed redundant primer) |
m (→Usage) |
||
| Line 34: | Line 34: | ||
|-style="text-align:center;background-color: #44FF44" | |-style="text-align:center;background-color: #44FF44" | ||
|[[Assembling_Delta_Effector:MOST|End Effector]]||[[Assembling Delta:MOST|Frame]] | |[[Assembling_Delta_Effector:MOST|End Effector]]||[[Assembling Delta:MOST|Frame]] | ||
|- | |||
|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Vertical Boards:MOST|Verticals, Controller, Extruder and Effector]] | |||
|- | |- | ||
|colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Firmware:MOST|Firmware]] | |colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Firmware:MOST|Firmware]] | ||
Revision as of 17:40, 11 July 2014
Usage
Use the following code to implement this template:
{{MOST Delta Nav}}
| Tandem Build MOST Delta Navigation | |
| Green indicate workshop tasks | |
| Printer Primer | |
| Overview | |
| Soldering and tinning | |
| Assembling hot end | |
| Drilling Pilot Holes | |
| Person 1 | Person 2 |
|---|---|
| Tie Rods and Pulleys | Epoxying Magnets |
| Motor End Assembly | Idler End Assembly |
| Extruder Drive | Mount Bases |
| End Effector | Frame |
| Verticals, Controller, Extruder and Effector | |
| Firmware | |
| Finishing | |
| Printing Basics | |