(→Usage) |
(Color coded and switched up order) |
||
| Line 22: | Line 22: | ||
|- | |- | ||
!Person 1 !! Person 2 | !Person 1 !! Person 2 | ||
|- | |-style="text-align:center;background-color: #44FF44" | ||
|[[Assembling Delta Tie Rods:MOST|Tie Rods and Pulleys]]||[[Assembling Delta Effector:MOST|Epoxying Magnets]] | |[[Assembling Delta Tie Rods:MOST|Tie Rods and Pulleys]]||[[Assembling Delta Effector:MOST|Epoxying Magnets]] | ||
|- | |-style="text-align:center;background-color: #44FF44" | ||
|[[Delta Motor End Assembly:MOST|Motor End Assembly]]||[[Delta Idler End:MOST|Idler End Assembly]] | |[[Delta Motor End Assembly:MOST|Motor End Assembly]]||[[Delta Idler End:MOST|Idler End Assembly]] | ||
|- | |-style="text-align:center;background-color: #44FF44" | ||
|[[Delta Extruder Drive Assembly:MOST|Extruder Drive]]||[[MOST RepRap braiding|Braid Motor Wires]] | |[[Delta Extruder Drive Assembly:MOST|Extruder Drive]]||[[MOST RepRap braiding|Braid Motor Wires]] | ||
|- | |- | ||
|colspan="2" style="text-align:center;background-color: 44FF44"|[[Assembling Delta:MOST|Frame]] | |colspan="2" style="text-align:center;background-color: #44FF44"|[[Assembling Delta:MOST|Frame]] | ||
|- | |- | ||
|colspan="2" style="text-align:center"|[[Delta Firmware:MOST|Firmware]] | |colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta Firmware:MOST|Firmware]] | ||
|- | |- | ||
|colspan="2" style="text-align:center"|[[Delta calibration|Finishing]] | |colspan="2" style="text-align:center;background-color: #44FF44"|[[Delta calibration|Finishing]] | ||
|- | |- | ||
|colspan="2" style="text-align:center"|[[3D_Printing_Basics:MOST|Printing Basics]] | |colspan="2" style="text-align:center;background-color: #44FF44"|[[3D_Printing_Basics:MOST|Printing Basics]] | ||
|- | |- | ||
|colspan="2" style="text-align:center"|[[MOST_RepRap_Primer|Printer Primer]] | |colspan="2" style="text-align:center"|[[MOST_RepRap_Primer|Printer Primer]] | ||
|} | |} | ||
Revision as of 21:38, 30 June 2014
Usage
Use the following code to implement this template:
{{MOST Delta Nav}}
| Tandem Build MOST Delta Navigation | |
| Printer Primer | |
| Overview | |
| Soldering and tinning | |
| Assembling hot end | |
| Person 1 | Person 2 |
|---|---|
| Tie Rods and Pulleys | Epoxying Magnets |
| Motor End Assembly | Idler End Assembly |
| Extruder Drive | Braid Motor Wires |
| Frame | |
| Firmware | |
| Finishing | |
| Printing Basics | |
| Printer Primer | |