m (Reverted edits by Simplytim (talk) to last revision by Mayank Moon)
(32 intermediate revisions by 2 users not shown)
Line 17: Line 17:
==Abstract==
==Abstract==
# People spend hours in the scorching sun to make sure that they water there crop, and mostly done manually. By 3D printing the design mentioned in this page, it make sure that they can attach the water hose on the tube and crop can be watered.
# People spend hours in the scorching sun to make sure that they water there crop, and mostly done manually. By 3D printing the design mentioned in this page, it make sure that they can attach the water hose on the tube and crop can be watered.
# Picture of completed print using your printer [[Image:Wood_WorkingClamp_Parts.png|200px|right]]
[[Image:Sprinkler Head.jpg|200px|right]]


== Bill of Materials==
== Bill of Materials==
# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
# The part is just in one part, so only 3D printer PLA material is required.
## Upload and link to all source files from open source CAD
# Youmagine Link Sprinkler Head: [[https://www.youmagine.com/designs/sprinkler-head-58-36]]
## Upload and link to all STLs


== Tools needed for fabrication of the OSAT==
== Tools needed for fabrication of the OSAT==
# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer
# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer
#
# 3D printer PLA material


== Skills and Knowledge Necessary to Make the OSAT ==
== Skills and Knowledge Necessary to Make the OSAT ==
* If you used special skill – link to relevant wikipedia or wikiversity articles/courses
* The project is really simple with just one part, so having good knowledge of printing is required.


== Technical Specifications and Assembly Instructions==
== Technical Specifications and Assembly Instructions==
# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
# Orientation for printing is very important, printing in this format ensure ease removal of support.
# Include print time estimate
# Print time 4 hr.
# Include assembly time estimate
# Demonstration video as shown
# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
# Consider video if appropriate
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
!<big>Example video summary of textbook</big>
!<big>Sprinkler demonstration video</big>
|-
|-
|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
|-
|-
|<center>{{#widget:YouTube|id=ZZxRSZGbaAA}} </center>
|-
|-
|}
|}
[[Image:Orientation sprinkler head.png|200px|right]]


=== Common Problems and Solutions===
=== Common Problems and Solutions===
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them
* Kindly take care of orientation


== Cost savings==
== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
* Low cost appropriate Technology
# Estimate your costs
# Estimate your costs $0.89
# Find a commercial equivalent
# Find a commercial equivalent $7
# Calculate $ savings and % savings
# Calculate $6.11 savings and 85.71% savings


== Benefited Internet Communities ==
== Benefited Internet Communities ==
* Name and add links to at least 5 using single brackets around [url name]
* Farmer: [https://en.wikipedia.org/wiki/Farmer] Irrigation: [https://en.wikipedia.org/wiki/Irrigation] Gardening [https://en.wikipedia.org/wiki/Gardening]


==References==
==References==


* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>
*For example: <ref> web page: Sprinkler Safety, DOE/GO-10095 (1995) Available: https://www.safety.com/sprinklers/#gref</ref>


<references/>  
<references/>  
<nowiki>
<nowiki>
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in






[[Category:How tos]]
[[Category:Irrigation]]
[[Category:Electricity]]
[[Category:Gardening]]
[[Category:Electric lighting]].
[[Category:3D printer]]
[[Category:Watering]]
[[Category:Sustainable Farming]].


</nowiki>
</nowiki>


[[category:OSAT 3D-Printable Designs]]
[[category:OSAT 3D-Printable Designs]]


== See also ==
== See also ==


* [[]]
* [[https://www.safety.com/sprinklers/#gref]]
* [[]]
* [[https://en.wikipedia.org/wiki/Irrigation_sprinkler]]
* [[]]
* [[https://en.wikipedia.org/wiki/Center_pivot_irrigation]]


== External links ==
== External links ==


* []  
* Youmagine Link [https://www.youmagine.com/designs/sprinkler-head-58-36]  




{{stub}}
{{stub}}


[[Category:]]
[[Farm Sprinkler]]
[[Category:]]
[[Garden Sprinkler]]

Revision as of 17:12, 13 June 2019

Template


Copy the wiki markup below to your page to use as a template

Title of the device or system

Project developed by Mayank Moon 

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

  1. People spend hours in the scorching sun to make sure that they water there crop, and mostly done manually. By 3D printing the design mentioned in this page, it make sure that they can attach the water hose on the tube and crop can be watered.
Sprinkler Head.jpg

Bill of Materials

  1. The part is just in one part, so only 3D printer PLA material is required.
  2. Youmagine Link Sprinkler Head: [[1]]

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. 3D printer PLA material

Skills and Knowledge Necessary to Make the OSAT

  • The project is really simple with just one part, so having good knowledge of printing is required.

Technical Specifications and Assembly Instructions

  1. Orientation for printing is very important, printing in this format ensure ease removal of support.
  2. Print time 4 hr.
  3. Demonstration video as shown
Sprinkler demonstration video
Error in widget YouTube: Unable to load template 'wiki:YouTube'
Orientation sprinkler head.png

Common Problems and Solutions

  • Kindly take care of orientation

Cost savings

  • Low cost appropriate Technology
  1. Estimate your costs $0.89
  2. Find a commercial equivalent $7
  3. Calculate $6.11 savings and 85.71% savings

Benefited Internet Communities

References

  • For example: [1]
  1. web page: Sprinkler Safety, DOE/GO-10095 (1995) Available: https://www.safety.com/sprinklers/#gref

[[Category:Irrigation]] [[Category:Gardening]] [[Category:3D printer]] [[Category:Watering]] [[Category:Sustainable Farming]].

See also

External links

  • Youmagine Link [8]


Template:Stub

Farm Sprinkler Garden Sprinkler

Cookies help us deliver our services. By using our services, you agree to our use of cookies.