Template

Copy the wiki markup below to your page to use as a template

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...

Title of the device or system

Project developed by Mayank Moon 

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

1. People spend hours in the scorching sun to make sure that they water there crop, and mostly done manually. By 3D printing the design mentioned in this page, it make sure that they can attach the water hose on the tube and crop can be watered.

Bill of Materials

1. The part is just in one part, so only 3D printer PLA material is required.
2. Youmagine Link Sprinkler Head: [[1]]

Tools needed for fabrication of the OSAT

1. MOST Delta RepRap or similar RepRap 3-D printer
2. 3D printer PLA material

Skills and Knowledge Necessary to Make the OSAT

• The project is really simple with just one part, so having good knowledge of printing is required.

Technical Specifications and Assembly Instructions

1. Orientation for printing is very important, printing in this format ensure ease removal of support.
2. Print time 4 hr.
3. Demonstration video as shown

Common Problems and Solutions

• Kindly take care of orientation

Cost savings

• Low cost appropriate Technology

1. Estimate your costs $0.89
2. Find a commercial equivalent $7
3. Calculate $6.11 savings and 85.71% savings

Benefited Internet Communities

• Farmer: [2] Irrigation: [3] Gardening [4]

References

• The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: ^[1]

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].

See also

• [[]]
• [[]]
• [[]]

External links

• []

Template:Stub

[[Category:]] [[Category:]]