The following pages link to Category:MOST users:
Displayed 250 items.
- Figures of merit for GaN substrates (← links | edit)
- GNUPlot method: MOST (← links | edit)
- Assembling Delta Effector:MOST (← links | edit)
- Delta Extruder Drive Assembly:MOST (← links | edit)
- Soldering and Tinning:MOST (← links | edit)
- PLA properties (← links | edit)
- MOST Stage v1 (← links | edit)
- Open-source hardware for research and education (← links | edit)
- XRD rocking curve protocol (← links | edit)
- Backpack Delta (← links | edit)
- Backpack Delta BOM (← links | edit)
- Backpack Delta: Building the Lower Platform (← links | edit)
- Open-source metal 3-D printer (← links | edit)
- Installation of a variable-angle spectrometer system for monitoring diffuse and global solar radiation (← links | edit)
- Delta Firmware:MOST (← links | edit)
- Delta calibration (← links | edit)
- Motor force protocol (← links | edit)
- Código abierto Impresora 3-D para Metales (← links | edit)
- Printer specific energy protocol:MOST (← links | edit)
- MOST open access policy (← links | edit)
- 3D Printing Basics:MOST (← links | edit)
- Orbital shaker literature review (← links | edit)
- Securitization of residential solar photovoltaic assets (← links | edit)
- Large scale plasmonic cell fabrication literature review (← links | edit)
- Open-source hardware for science in Ecuador (← links | edit)
- Solar Irradiation Data Sources (← links | edit)
- 3D printable science equipment (← links | edit)
- Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament (← links | edit)
- MOST Printer Log (← links | edit)
- Optimizing limited solar roof access by exergy analysis of solar thermal, photovoltaic, and hybrid photovoltaic thermal systems (← links | edit)
- Automated microscope stage literature review (← links | edit)
- Mechanical Properties of Components Fabricated with Open-Source 3-D Printers Under Realistic Environmental Conditions (← links | edit)
- Photovoltaic system performance enhancement with non-tracking planar concentrators: Experimental results and BDRF based modelling (← links | edit)
- Assembling PlanetaryGearbox:MOST (← links | edit)
- The effects of dispatch strategy on electrical performance of amorphous silicon-based solar photovoltaic-thermal systems (← links | edit)
- Innovation through collaboration: scaling up solutions for sustainable development (← links | edit)
- Implementing Self-Replicating Rapid Prototypers (RepRaps) into a Mechanical\Manufacturing Program (← links | edit)
- Object oriented OpenSCAD (← links | edit)
- MOST quad delta RepRap (← links | edit)
- 3D printable science equipment page 2 (← links | edit)
- 3D printers education (← links | edit)
- Open-source scientific hardware gallery (← links | edit)
- 3D printer bed adhesion:MOST (← links | edit)
- Exchanging Ohmic losses in metamaterial absorbers with useful optical absorption for photovoltaics (← links | edit)
- MOST 3-D printer workshop preparation (← links | edit)
- Open-source mobile water quality testing platform (← links | edit)
- Backpack Delta: Building the Upper Platform (← links | edit)
- Backpack Delta: Building the Towers (← links | edit)
- Energy dispersive spectroscopy:MOST (← links | edit)
- Mechanical testing of 3D printed metal parts (← links | edit)
- Aluminum Iron Intermetallics (← links | edit)
- 3D Metal Printing P V Curve Literature Review (← links | edit)
- Solar water pasteurisation literature review (← links | edit)
- Liability for carbon emissions literature review (← links | edit)
- 3D printable science equipment page 3 (← links | edit)
- Dr. Frost UV spectroscopy unit protocol MOST (← links | edit)
- Dr. Hu solar simulator protocol: MOST (← links | edit)
- Open source test tube racks (← links | edit)
- Open source centrifuges (← links | edit)
- RepRap materials (← links | edit)
- Solar simulator calibration curve: MOST (← links | edit)
- 3D printable OSAT gallery (← links | edit)
- MOST open-source metal 3-D printer v2 (← links | edit)
- The RepRap 3-D Printer Revolution in STEM Education (← links | edit)
- Delta Epoxy Magnets:MOST (← links | edit)
- Delta Pilot Holes:MOST (← links | edit)
- MOST Mount Bases (← links | edit)
- Evaluating the Geographic Viability of the Solar Water Disinfection (SODIS) Method by Decreasing Turbidity with NaCl: A Case Study of South Sudan (← links | edit)
- Delta Vertical Boards:MOST (← links | edit)
- Delta Wiring:MOST (← links | edit)
- Corn sheller (← links | edit)
- A Virtual Educational Exchange: A North-South Virtually-Shared Class on Sustainable Development (← links | edit)
- Veusz: MOST (← links | edit)
- Delta Software:MOST (← links | edit)
- Requests for 3-D printable open source appropriate technology (← links | edit)
- Towards Low-Cost Microchannel Heat Exchangers: Vehicle Heat Recovery Ventilator Prototype (← links | edit)
- Delta Build Workshop (← links | edit)
- Simulations of Greenhouse Gas Emission Reductions from Low-Cost Hybrid Solar Photovoltaic and Cogeneration Systems for New Communities (← links | edit)
- Auto pipette and Liquid handler literature review (← links | edit)
- Dr. Frost sodis polymer experimental procedure (← links | edit)
- Laser dot welding : MOST (← links | edit)
- Open-source syringe pump (← links | edit)
- PET Extrusion (← links | edit)
- Multi-resonant silver nano-disk patterned thin film hydrogenated amorphous silicon solar cells for Staebler-Wronski effect compensation (← links | edit)
- Steel 3D printing literature review (← links | edit)
- PET preparation protocol:MOST (← links | edit)
- Evaluation of Potential Fair Trade Standards for an Ethical 3-D Printing Filament (← links | edit)
- Mobile Open-Source Solar-Powered 3-D Printers for Distributed Manufacturing in Off-Grid Communities (← links | edit)
- RecycleBot Instructions (← links | edit)
- Silver plating:MOST (← links | edit)
- Feeding Everyone No Matter What (← links | edit)
- Design of Multi-Junction Photovoltaic Cells Optimized for Varied Atmospheric Conditions (← links | edit)
- InGaN growth buffer layer literature review (← links | edit)
- It Is Time to Move Research Expenditures to the Denominator in University Metrics (← links | edit)
- Substrate Release Mechanisms for Gas Metal Arc Weld 3D Aluminum Metal Printing (← links | edit)
- Feeding Everyone: Solving the Food Crisis in Event of Global Catastrophes that Kill Crops or Obscure the Sun (← links | edit)
- Solar Panels holders (Solar powered delta) (← links | edit)
- Building Open Source Hardware in Academia (← links | edit)
- Reversing the Trend of Large Scale and Centralization in Manufacturing: The Case of Distributed Manufacturing of Customizable 3-D-Printable Self-Adjustable Glasses (← links | edit)
- Beaglebone:MOST (← links | edit)
- Quantifying the Value of Open Source Hardware Development (← links | edit)
- Photovoltaic Nitrogen-fixation and organic farming literature review (← links | edit)
- PV-Powered Recyclebot (← links | edit)
- Spin coater Literature Review (← links | edit)
- PV and CHP Hybrid System (← links | edit)
- Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films (← links | edit)
- Appropriate technology graduate thesis literature review (← links | edit)
- Auto-Clearance Adjustable Triple Hotend Effector (← links | edit)
- Photovoltaic System for Internet applications Literature Review (← links | edit)
- Open-source 3-D printing Technologies for Education: Bringing Additive Manufacturing to the Classroom (← links | edit)
- A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications (← links | edit)
- Recyclebot v4.0ac (← links | edit)
- XRD for 3-D printed parts (← links | edit)
- Polymer recycling codes for distributed manufacturing with 3-D printers (← links | edit)
- Method of producing cellulose insulation (← links | edit)
- Review of positive externalities of photovoltaics for the grid (← links | edit)
- Differential scanning calorimetry protocol: MOST (← links | edit)
- Review of low cost synthesis of perovskite solar cells (← links | edit)
- A Case for Weakening Patent Rights (← links | edit)
- Optimization of annealing cycles for electric output in outdoor conditions for amorphous silicon photovoltaic–thermal systems (← links | edit)
- Lulzbot mini user guide:MOST (← links | edit)
- Open-source laser cutter (← links | edit)
- Lulzbot TAZ user guide:MOST (← links | edit)
- Methodology for 3D-Printed Part Design (← links | edit)
- Applications of Open Source 3-D Printing on Small Farms (← links | edit)
- ABS recycling for 3-D printer filament (← links | edit)
- GTAW-based 3D printing papers literature review (← links | edit)
- GMAW and GTAW 3D printing microsctructure literature review (← links | edit)
- Bike Pedal Example of Methodology for 3D-Printed Part Design (← links | edit)
- Solar-powered 3-D printer - Literature review (← links | edit)
- Chenlong Nanobeads Project (← links | edit)
- Reindeer husbandry literature review (← links | edit)
- Photovoltaic applications in northern climates literature review (← links | edit)
- Mobile photovoltaic applications literature review (← links | edit)
- Resilience to global food supply catastrophes (← links | edit)
- Polymer drying protocol:MOST (← links | edit)
- Ultrasonic test protocol: MOST (← links | edit)
- Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking (← links | edit)
- Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto (← links | edit)
- How to install FLIR Lepton Thermal Camera and applications on Raspberry Pi (← links | edit)
- Plug-and-Play Solar Photovoltaic Microinverter Systems (← links | edit)
- Peanut shaped ZnO microstructures: controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells (← links | edit)
- Plastic bottle strip 3D printer project (← links | edit)
- Evaluation of RepRap 3D Printer Workshops in K-12 STEM (← links | edit)
- Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing (← links | edit)
- Return on Investment for Open Source Hardware Development (← links | edit)
- In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing (← links | edit)
- Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices (← links | edit)
- Aluminum substrate cleaning for 3-D printing:MOST (← links | edit)
- Steel substrate cleaning for 3-D printing:MOST (← links | edit)
- A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials (← links | edit)
- KRC racking data acquisition (← links | edit)
- Performance of U.S. hybrid distributed energy systems: Solar photovoltaic, battery and combined heat and power (← links | edit)
- Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer (← links | edit)
- Open-Source Photometric System for Enzymatic Nitrate Quantification (← links | edit)
- Weed wacker line as 3D printing filament (← links | edit)
- Impact of Snow and Ground Interference on Photovoltaic Electric System Performance (← links | edit)
- Economic Impact of Installing PV rooftop systems in Walmart Parking lots - Literature review (← links | edit)
- Controlling optical absorption in metamaterial absorbers for plasmonic solar cells (← links | edit)
- Photovoltaic technology impacts on national security: literature review (← links | edit)
- Microgrid PV-CHP-Battery: literature review (← links | edit)
- Control strategies for melting snow on PV modules (← links | edit)
- Educational Pathways to Remote Employment in Isolated Communities (← links | edit)
- Franklin:MOST (← links | edit)
- Surgical Retractors Literature Search (← links | edit)
- The Effects of PLA Color on Material Properties of 3-D Printed Components (← links | edit)
- Photovoltaic System Performance Enhancement With Non-Tracking Planar Concentrators: Experimental Results and Bi-Directional Reflectance Function (BDRF) Based Modelling (← links | edit)
- Franklin (← links | edit)
- MOST Delta end effector for nylon (← links | edit)
- Open-source, self-replicating 3-D printer factory for small-business manufacturing (← links | edit)
- Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems (← links | edit)
- Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer (← links | edit)
- Nicaragua Enabling the Future Project:MOST (← links | edit)
- 3d printing safety (← links | edit)
- 3D printed photovoltaic module spacer (← links | edit)
- Preparation of meta-stable phases of barium titanate by sol-hydrothermal method (← links | edit)
- Solar Photovoltaic Powered On-Site Ammonia Production for Nitrogen Fertilization (← links | edit)
- The potential of agrivoltaic systems (← links | edit)
- MOST Delta end effector for polypropylene (← links | edit)
- GigabotHX (← links | edit)
- Sharing Free Knowledge to Save Humanity (← links | edit)
- A Review of Greenhouse Gas Emission Liabilities as the Value of Renewable Energy for Mitigating Lawsuits for Climate Change Related Damages (← links | edit)
- Metal wire embedding in fused filament 3-D printing (← links | edit)
- 3D Metal Printing Slicer Plugin (← links | edit)
- Reducing the Threat of a Nuclear Iran with Photovoltaic Technology: The Generous Solar Option (← links | edit)
- Technical viability of mobile solar photovoltaic systems for indigenous nomadic communities in northern latitudes (← links | edit)
- Aligning executive incentives with global public health goals (← links | edit)
- Free and Open-source Control Software for 3-D Motion and Processing (← links | edit)
- Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems (← links | edit)
- Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics (← links | edit)
- Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem (← links | edit)
- High-Efficiency Solar-Powered 3-D Printers for Sustainable Development (← links | edit)
- Influence of Oxygen Concentration on the Performance of Ultra-Thin RF Magnetron Sputter Deposited Indium Tin Oxide Films as a Top Electrode for Photovoltaic Devices (← links | edit)
- Dip coating:MOST (← links | edit)
- Energy Payback Time of a Solar Photovoltaic Powered Waste Plastic Recyclebot System/Literature review (← links | edit)
- Intellectual Property barriers to photvoltaic efficiency (← links | edit)
- Kirigami design approach to LCPV reflectors (← links | edit)
- PV deployed on noise barriers literature review (← links | edit)
- Open source 4-point probe literature review (← links | edit)
- Global value chains from a 3D printing perspective (← links | edit)
- 3-D print warping literature review:MOST (← links | edit)
- Recyclebot/Literature review (← links | edit)
- Value Of solar literature review (← links | edit)
- Technical Guidance for Evaluating Selected Solar Technologies on Airports (← links | edit)
- T400 temperature datalogger:MOST (← links | edit)
- Biofuel vs PV literature review (← links | edit)
- Low Temperature High Strength Bainite Literature Review (← links | edit)
- PV and Recyclebot (← links | edit)
- A new method of preparing highly conductive ultra-thin indium tin oxide for plasmonic-enhanced thin film solar photovoltaic devices (← links | edit)
- Thermal conductivity of filaments for 3D printing lit review (← links | edit)
- PET Crystallinity (← links | edit)
- Isostatic Pressing Protocol (HIP\CIP):MOST (← links | edit)
- How Accounting Costs Science Millions a Year (← links | edit)
- Recyclebot v4.0dc (← links | edit)
- Open Source Polymer Welder Literature Review (← links | edit)
- Fluorometer Literature Review (← links | edit)
- Franklin Firmware on GigabotHX:MOST (← links | edit)
- Emerging economic viability of grid defection in a northern climate using solar hybrid systems (← links | edit)
- 3-D printed weld bead geometry characterization (← links | edit)
- Literature review acrylonitrile butadiene styrene plastic recylling (← links | edit)
- Recyclebot v4.1 (← links | edit)
- Metal Wire Embedding Lit Review (← links | edit)
- Glass substrate cleaning method: MOST (← links | edit)
- Slot Die Head for Solution-processed PV Cells Lit Review (← links | edit)
- Open source syringe pump 3-D printer (← links | edit)
- Retraining Investment for U.S. Transition from Coal to Solar Photovoltaic Employment (← links | edit)
- A review of technical requirements for plug-and-play solar photovoltaic microinverter systems in the United States (← links | edit)
- Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds (← links | edit)
- Alternative Foods as a Solution to Global Food Supply Catastrophes (← links | edit)
- Atomic Force Microscopy(AFM) Protocol : MOST (← links | edit)
- Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing (← links | edit)
- Backgrounder:MOST (← links | edit)
- System Advisor Model (SAM):MOST (← links | edit)
- Filament print settings: MOST (← links | edit)
- Free and open-source automated 3-D microscope (← links | edit)
- Feeding Everyone if Industry is Disabled (← links | edit)
- Providing Non-food Needs if Industry is Disabled (← links | edit)
- Vitamins in Agricultural Catastrophes (← links | edit)
- Integrative Risk Management for Catastrophe Destroying 10-20% of Global Food Supply (← links | edit)
- Structural and optical characterization and efficacy of hydrothermal synthesized Cu and Ag doped zinc oxide nanoplate bactericides (← links | edit)
- Recycled PLA Filament for Concrete Aggregate Literature Review (← links | edit)
- Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally (← links | edit)
- Chemtool(How to draw chemistry):MOST (← links | edit)
- Grinding Mill in Forestry Plant:MOST (← links | edit)
- Transmission Measurement Procedure:MOST (← links | edit)
- MOST delta-based metal printers SOP (← links | edit)
- CNC Router Parts-based metal printers SOP (← links | edit)
- MOST Metal Cura (← links | edit)
- 3d printing error detection (← links | edit)
- Wood Filament Fabrication Literature Review (← links | edit)