We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Changes

Jump to navigation Jump to search

Scrub Brush

12 bytes added, 01:59, 7 December 2019
== Technical Specifications and Assembly Instructions==
#Download desired .stls from thingiverse.com
# Cura Print Settings
##Scale to 101% so G-code will slice bristles
## Set default print speed to 60 mm/s
## Enable "Print thin walls"
## Enable Support with 15% density and 0.5 mm Top Z DistanceDisable support
## Enable bridge settings
###Min. bridge wall length: 0.5 mm
=== Common Problems and Solutions===
* Bristles are not printing right
**Make sure Try scaling .stl to 101% to ensure it is scaled 110% for Lulzbot Taz 6sliced properly
**Change bridge print settings
**Make changes to bristle dimensions in .scad

Navigation menu